openwrt/target/linux/layerscape/patches-5.4/701-net-0226-enetc-update-TSN-Qbv-PSPEED-set-according-to-adjust-.patch
John Audia 2c81b16964 kernel: bump 5.4 to 5.4.106
Ran update_kernel.sh in a fresh clone without any existing toolchains.

Manually rebased:
  bcm27xx/950-0993-xhci-quirks-add-link-TRB-quirk-for-VL805.patch
  layerscape/701-net-0231-enetc-Use-DT-protocol-information-to-set-up-the-port.patch

Build system: x86_64
Build-tested: ipq806x/R7800
Run-tested: ipq806x/R7800

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
[remove accidental whitespace edit]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-03-21 22:45:20 +01:00

172 lines
5.3 KiB
Diff

From 877119a3f6bce2d9091faa4e51490917be8a3158 Mon Sep 17 00:00:00 2001
From: Po Liu <po.liu@nxp.com>
Date: Fri, 15 Nov 2019 03:33:41 +0000
Subject: [PATCH] enetc: update TSN Qbv PSPEED set according to adjust link
speed
ENETC has a register PSPEED to indicate the link speed of hardware.
It is need to update accordingly. PSPEED field needs to be updated
with the port speed for QBV scheduling purposes. Or else there is
chance for gate slot not free by frame taking the MAC if PSPEED and
phy speed not match. So update PSPEED when link adjust. This is
implement by the adjust_link.
Signed-off-by: Po Liu <Po.Liu@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/freescale/enetc/enetc.c | 13 +++++++--
drivers/net/ethernet/freescale/enetc/enetc.h | 8 ++++++
drivers/net/ethernet/freescale/enetc/enetc_hw.h | 5 ++++
drivers/net/ethernet/freescale/enetc/enetc_pf.c | 3 +++
drivers/net/ethernet/freescale/enetc/enetc_qos.c | 34 ++++++++++++++++++++++++
5 files changed, 61 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/freescale/enetc/enetc.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc.c
@@ -742,9 +742,14 @@ void enetc_get_si_caps(struct enetc_si *
si->num_rss = 0;
val = enetc_rd(hw, ENETC_SIPCAPR0);
if (val & ENETC_SIPCAPR0_RSS) {
- val = enetc_rd(hw, ENETC_SIRSSCAPR);
- si->num_rss = ENETC_SIRSSCAPR_GET_NUM_RSS(val);
+ u32 rss;
+
+ rss = enetc_rd(hw, ENETC_SIRSSCAPR);
+ si->num_rss = ENETC_SIRSSCAPR_GET_NUM_RSS(rss);
}
+
+ if (val & ENETC_SIPCAPR0_QBV)
+ si->hw_features |= ENETC_SI_F_QBV;
}
static int enetc_dma_alloc_bdr(struct enetc_bdr *r, size_t bd_size)
@@ -1309,8 +1314,12 @@ static void enetc_disable_interrupts(str
static void adjust_link(struct net_device *ndev)
{
+ struct enetc_ndev_priv *priv = netdev_priv(ndev);
struct phy_device *phydev = ndev->phydev;
+ if (priv->active_offloads & ENETC_F_QBV)
+ enetc_sched_speed_set(ndev);
+
phy_print_status(phydev);
}
--- a/drivers/net/ethernet/freescale/enetc/enetc.h
+++ b/drivers/net/ethernet/freescale/enetc/enetc.h
@@ -118,6 +118,8 @@ enum enetc_errata {
ENETC_ERR_UCMCSWP = BIT(2),
};
+#define ENETC_SI_F_QBV BIT(0)
+
/* PCI IEP device data */
struct enetc_si {
struct pci_dev *pdev;
@@ -133,6 +135,7 @@ struct enetc_si {
int num_fs_entries;
int num_rss; /* number of RSS buckets */
unsigned short pad;
+ int hw_features;
};
#define ENETC_SI_ALIGN 32
@@ -173,6 +176,7 @@ struct enetc_cls_rule {
enum enetc_active_offloads {
ENETC_F_RX_TSTAMP = BIT(0),
ENETC_F_TX_TSTAMP = BIT(1),
+ ENETC_F_QBV = BIT(2),
};
struct enetc_ndev_priv {
@@ -188,6 +192,8 @@ struct enetc_ndev_priv {
u16 msg_enable;
int active_offloads;
+ u32 speed; /* store speed for compare update pspeed */
+
struct enetc_bdr *tx_ring[16];
struct enetc_bdr *rx_ring[16];
@@ -253,6 +259,8 @@ int enetc_send_cmd(struct enetc_si *si,
#ifdef CONFIG_FSL_ENETC_QOS
int enetc_setup_tc_taprio(struct net_device *ndev, void *type_data);
+void enetc_sched_speed_set(struct net_device *ndev);
#else
#define enetc_setup_tc_taprio(ndev, type_data) -EOPNOTSUPP
+#define enetc_sched_speed_set(ndev) (void)0
#endif
--- a/drivers/net/ethernet/freescale/enetc/enetc_hw.h
+++ b/drivers/net/ethernet/freescale/enetc/enetc_hw.h
@@ -149,6 +149,11 @@ enum enetc_bdr_type {TX, RX};
#define ENETC_PORT_BASE 0x10000
#define ENETC_PMR 0x0000
#define ENETC_PMR_EN GENMASK(18, 16)
+#define ENETC_PMR_PSPEED_MASK GENMASK(11, 8)
+#define ENETC_PMR_PSPEED_10M 0
+#define ENETC_PMR_PSPEED_100M BIT(8)
+#define ENETC_PMR_PSPEED_1000M BIT(9)
+#define ENETC_PMR_PSPEED_2500M BIT(10)
#define ENETC_PSR 0x0004 /* RO */
#define ENETC_PSIPMR 0x0018
#define ENETC_PSIPMR_SET_UP(n) BIT(n) /* n = SI index */
--- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
@@ -742,6 +742,9 @@ static void enetc_pf_netdev_setup(struct
ndev->priv_flags |= IFF_UNICAST_FLT;
+ if (si->hw_features & ENETC_SI_F_QBV)
+ priv->active_offloads |= ENETC_F_QBV;
+
/* pick up primary MAC address from SI */
enetc_get_primary_mac_addr(&si->hw, ndev->dev_addr);
}
--- a/drivers/net/ethernet/freescale/enetc/enetc_qos.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_qos.c
@@ -11,6 +11,40 @@ static u16 enetc_get_max_gcl_len(struct
& ENETC_QBV_MAX_GCL_LEN_MASK;
}
+void enetc_sched_speed_set(struct net_device *ndev)
+{
+ struct enetc_ndev_priv *priv = netdev_priv(ndev);
+ struct phy_device *phydev = ndev->phydev;
+ u32 old_speed = priv->speed;
+ u32 speed, pspeed;
+
+ if (phydev->speed == old_speed)
+ return;
+
+ speed = phydev->speed;
+ switch (speed) {
+ case SPEED_1000:
+ pspeed = ENETC_PMR_PSPEED_1000M;
+ break;
+ case SPEED_2500:
+ pspeed = ENETC_PMR_PSPEED_2500M;
+ break;
+ case SPEED_100:
+ pspeed = ENETC_PMR_PSPEED_100M;
+ break;
+ case SPEED_10:
+ default:
+ pspeed = ENETC_PMR_PSPEED_10M;
+ netdev_err(ndev, "Qbv PSPEED set speed link down.\n");
+ }
+
+ priv->speed = speed;
+ enetc_port_wr(&priv->si->hw, ENETC_PMR,
+ (enetc_port_rd(&priv->si->hw, ENETC_PMR)
+ & (~ENETC_PMR_PSPEED_MASK))
+ | pspeed);
+}
+
static int enetc_setup_taprio(struct net_device *ndev,
struct tc_taprio_qopt_offload *admin_conf)
{