ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-20 06:08:08 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity
b34aa6aff7
openwrt/target/linux/layerscape/patches-5.4/302-dts-0006-arm64-dts-ls1012a-accumulated-change-for-ls1012a-boa.patch
John Audia ec6293febc kernel: bump 5.4 to 5.4.109 
Ran update_kernel.sh in a fresh clone without any existing toolchains.

Manually rebased:
  pending-5.4/611-netfilter_match_bypass_default_table.patch

The upstream change affecting this patch is the revert of an earlier
kernel commit. Therefore, we just revert our corresponding changes
in [1].

Build system: x86_64
Build-tested: ipq806x/R7800

[1] 9b1b89229f ("kernel: bump 5.4 to 5.4.86")

Signed-off-by: John Audia <graysky@archlinux.us>
[adjust manually rebased patch, add explanation]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-04-02 16:45:28 +02:00

462 lines
11 KiB
Diff
Raw Blame History

From 8fd1ab38e922383fa87db60c48c44ab0d5e6f1c1 Mon Sep 17 00:00:00 2001
From: Li Yang <leoyang.li@nxp.com>
Date: Thu, 2 May 2019 15:52:49 -0500
Subject: [PATCH] arm64: dts: ls1012a: accumulated change for ls1012a boards
commit 65c558ec270003e8e99cb58c940d3b913d08fa39
Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
Date: Tue May 15 08:47:19 2018 +0800
arm64: dts: ls1012a: correct the register range of dcfg
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
commit 8f7b4cded4ea1fca53516ae8f5d5bc89af291f26
Author: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Date: Mon May 7 11:52:04 2018 +0530
arm64: dts: ls1012a: Add LS1012A-FRWY board support
LS1012A-FRWY is a different design from LS1012A-FRDM,
but has some common SoC features. Key feature on this
board is 2x1G SGMII PFE MAC, Micro SD, USB 3.0, DDR,
QuadSPI, Audio, UART.
Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
commit 94fc77837b3b6f4213a49b29ddc3e09e38ae5fbb
Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
Date: Mon Apr 2 16:16:47 2018 +0800
arm64: dts: ls1012a: add dts entry for A-010650
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
commit d4164a6d8cffd8f09c451073754834d58b7ace19
Author: Suresh Gupta <suresh.gupta@nxp.com>
Date: Thu Feb 1 23:44:15 2018 +0530
arm64: dts: freescale: ls1012a: Add DT nodes for qspi
Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com>
commit 4fdc98a03492b732a48426a4180f7d6a36847e71
Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
Date: Wed Nov 1 10:31:47 2017 +0800
arm64: dts: ls1012a: correct the i2c clock to 1/4 platform pll
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
commit bb534725996b92aff853a4dee43738629fd4ac08
Author: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Date: Wed Nov 29 06:31:23 2017 +0530
arm64: dts: freescale: ls1012a: Disable PCIe node as default
Keep PCIe node in "disabled" status as SoC default.
Only enable it for boards with PCIe circuit designed,
such as LS1012ARDB and LS1012AQDS.
Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
commit 6b9a3244baba2c5126f349800ecaad83ba97ee47
Author: Calvin Johnson <calvin.johnson@nxp.com>
Date: Mon Oct 16 12:25:19 2017 +0530
arm64: dts: freescale: ls1012a: fix RGMII tx delay issue
Recently logic to enable RGMII tx delay was changed by
below patch.
https://patchwork.kernel.org/patch/9447581/
Based on the patch, enabling tx delay again using rgmii-txid.
Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
commit 1e17e247088f6e2c08041559e38053b70a9d2bbe
Author: Calvin Johnson <calvin.johnson@nxp.com>
Date: Sat Sep 16 14:20:23 2017 +0530
arm64: dts: freescale: ls1012a: update with pppfe support
Update ls1012a dtsi and platform dts files with
support for ppfe.
Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
commit e9661ed864d2a9d437057f97729410bb9af994f2
Author: Suresh Gupta <suresh.gupta@nxp.com>
Date: Tue May 16 17:17:21 2017 +0530
arm64: dts: ls1012a: add the DTS node for QSPI support
There is a s25fs512s qspi flash on QDS, RDB and FRDM board.
Signed-off-by: Yuan Yao <yao.yuan@nxp.com>
commit ed9c51239461fe0322da2e93f50033ea0d05bc4f
Author: Chenhui Zhao <chenhui.zhao@nxp.com>
Date: Fri May 5 17:45:15 2017 +0800
arm64: dts: ls1012a: add ftm0 node
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts | 58 ++++++++++++++++++
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts | 62 ++++++++++++++++++++
arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts | 62 ++++++++++++++++++++
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 68 +++++++++++++++++++++-
4 files changed, 248 insertions(+), 2 deletions(-)
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
@@ -13,6 +13,11 @@
model = "LS1012A Freedom Board";
compatible = "fsl,ls1012a-frdm", "fsl,ls1012a";
+ aliases {
+ ethernet0 = &pfe_mac0;
+ ethernet1 = &pfe_mac1;
+ };
+
sys_mclk: clock-mclk {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -74,6 +79,44 @@
};
};
+&pfe {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet@0 {
+ compatible = "fsl,pfe-gemac-port";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>; /* GEM_ID */
+ fsl,gemac-bus-id = <0x0>; /* BUS_ID */
+ fsl,gemac-phy-id = <0x2>; /* PHY_ID */
+ fsl,mdio-mux-val = <0x0>;
+ phy-mode = "sgmii";
+ fsl,pfe-phy-if-flags = <0x0>;
+
+ mdio@0 {
+ reg = <0x1>; /* enabled/disabled */
+ };
+ };
+
+ ethernet@1 {
+ compatible = "fsl,pfe-gemac-port";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>; /* GEM_ID */
+ fsl,gemac-bus-id = <0x1>; /* BUS_ID */
+ fsl,gemac-phy-id = <0x1>; /* PHY_ID */
+ fsl,mdio-mux-val = <0x0>;
+ phy-mode = "sgmii";
+ fsl,pfe-phy-if-flags = <0x0>;
+
+ mdio@0 {
+ reg = <0x0>; /* enabled/disabled */
+ };
+ };
+};
+
&sai2 {
status = "okay";
};
@@ -81,3 +124,18 @@
&sata {
status = "okay";
};
+
+&qspi {
+ status = "okay";
+ qflash0: s25fs512s@0 {
+ compatible = "spansion,m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ m25p,fast-read;
+ reg = <0>;
+ spi-rx-bus-width = <2>;
+ spi-tx-bus-width = <2>;
+ };
+
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
@@ -13,6 +13,11 @@
model = "LS1012A QDS Board";
compatible = "fsl,ls1012a-qds", "fsl,ls1012a";
+ aliases {
+ ethernet0 = &pfe_mac0;
+ ethernet1 = &pfe_mac1;
+ };
+
sys_mclk: clock-mclk {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -57,6 +62,10 @@
};
};
+&pcie {
+ status = "okay";
+};
+
&dspi {
bus-num = <0>;
status = "okay";
@@ -128,6 +137,44 @@
};
};
+&pfe {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet@0 {
+ compatible = "fsl,pfe-gemac-port";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>; /* GEM_ID */
+ fsl,gemac-bus-id = <0x0>; /* BUS_ID */
+ fsl,gemac-phy-id = <0x1>; /* PHY_ID */
+ fsl,mdio-mux-val = <0x2>;
+ phy-mode = "sgmii-2500";
+ fsl,pfe-phy-if-flags = <0x0>;
+
+ mdio@0 {
+ reg = <0x1>; /* enabled/disabled */
+ };
+ };
+
+ ethernet@1 {
+ compatible = "fsl,pfe-gemac-port";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>; /* GEM_ID */
+ fsl,gemac-bus-id = <0x1>; /* BUS_ID */
+ fsl,gemac-phy-id = <0x2>; /* PHY_ID */
+ fsl,mdio-mux-val = <0x3>;
+ phy-mode = "sgmii-2500";
+ fsl,pfe-phy-if-flags = <0x0>;
+
+ mdio@0 {
+ reg = <0x0>; /* enabled/disabled */
+ };
+ };
+};
+
&sai2 {
status = "okay";
};
@@ -135,3 +182,18 @@
&sata {
status = "okay";
};
+
+&qspi {
+ status = "okay";
+ qflash0: s25fs512s@0 {
+ compatible = "spansion,m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ m25p,fast-read;
+ reg = <0>;
+ spi-rx-bus-width = <2>;
+ spi-tx-bus-width = <2>;
+ };
+
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
@@ -12,6 +12,15 @@
/ {
model = "LS1012A RDB Board";
compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
+
+ aliases {
+ ethernet0 = &pfe_mac0;
+ ethernet1 = &pfe_mac1;
+ };
+};
+
+&pcie {
+ status = "okay";
};
&duart0 {
@@ -38,3 +47,56 @@
&sata {
status = "okay";
};
+
+&pfe {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet@0 {
+ compatible = "fsl,pfe-gemac-port";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>; /* GEM_ID */
+ fsl,gemac-bus-id = <0x0>; /* BUS_ID */
+ fsl,gemac-phy-id = <0x2>; /* PHY_ID */
+ fsl,mdio-mux-val = <0x0>;
+ phy-mode = "sgmii";
+ fsl,pfe-phy-if-flags = <0x0>;
+
+ mdio@0 {
+ reg = <0x1>; /* enabled/disabled */
+ };
+ };
+
+ ethernet@1 {
+ compatible = "fsl,pfe-gemac-port";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>; /* GEM_ID */
+ fsl,gemac-bus-id = < 0x1 >; /* BUS_ID */
+ fsl,gemac-phy-id = < 0x1 >; /* PHY_ID */
+ fsl,mdio-mux-val = <0x0>;
+ phy-mode = "rgmii-txid";
+ fsl,pfe-phy-if-flags = <0x0>;
+
+ mdio@0 {
+ reg = <0x0>; /* enabled/disabled */
+ };
+ };
+};
+
+&qspi {
+ status = "okay";
+ qflash0: s25fs512s@0 {
+ compatible = "spansion,m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ m25p,fast-read;
+ reg = <0>;
+ spi-rx-bus-width = <2>;
+ spi-tx-bus-width = <2>;
+ };
+
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -261,7 +261,7 @@
dcfg: dcfg@1ee0000 {
compatible = "fsl,ls1012a-dcfg",
"syscon";
- reg = <0x0 0x1ee0000 0x0 0x10000>;
+ reg = <0x0 0x1ee0000 0x0 0x1000>;
big-endian;
};
@@ -318,13 +318,23 @@
#thermal-sensor-cells = <1>;
};
+ ftm0: ftm0@29d0000 {
+ compatible = "fsl,ftm-alarm";
+ reg = <0x0 0x29d0000 0x0 0x10000>,
+ <0x0 0x1ee2140 0x0 0x4>;
+ reg-names = "ftm", "FlexTimer1";
+ interrupts = <0 86 0x4>;
+ big-endian;
+ };
+
i2c0: i2c@2180000 {
- compatible = "fsl,vf610-i2c";
+ compatible = "fsl,vf610-i2c", "fsl,ls1012a-vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2180000 0x0 0x10000>;
interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 3>;
+ scl-gpios = <&gpio0 13 0>;
status = "disabled";
};
@@ -396,6 +406,20 @@
big-endian;
};
+ qspi: spi@1550000 {
+ compatible = "fsl,ls1012a-qspi", "fsl,ls1021a-qspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x1550000 0x0 0x10000>,
+ <0x0 0x40000000 0x0 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "qspi_en", "qspi";
+ clocks = <&clockgen 4 0>, <&clockgen 4 0>;
+ big-endian;
+ status = "disabled";
+ };
+
sai1: sai@2b50000 {
#sound-dai-cells = <0>;
compatible = "fsl,vf610-sai";
@@ -500,6 +524,46 @@
<0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
+
+ rcpm: rcpm@1ee2000 {
+ compatible = "fsl,ls1012a-rcpm", "fsl,qoriq-rcpm-2.1";
+ reg = <0x0 0x1ee2000 0x0 0x1000>;
+ fsl,#rcpm-wakeup-cells = <1>;
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ pfe_reserved: packetbuffer@83400000 {
+ reg = <0 0x83400000 0 0xc00000>;
+ };
+ };
+
+ pfe: pfe@04000000 {
+ compatible = "fsl,pfe";
+ reg = <0x0 0x04000000 0x0 0xc00000>, /* AXI 16M */
+ <0x0 0x83400000 0x0 0xc00000>; /* PFE DDR 12M */
+ reg-names = "pfe", "pfe-ddr";
+ fsl,pfe-num-interfaces = <0x2>;
+ interrupts = <0 172 0x4>, /* HIF interrupt */
+ <0 173 0x4>, /*HIF_NOCPY interrupt */
+ <0 174 0x4>; /* WoL interrupt */
+ interrupt-names = "pfe_hif", "pfe_hif_nocpy", "pfe_wol";
+ memory-region = <&pfe_reserved>;
+ fsl,pfe-scfg = <&scfg 0>;
+ fsl,rcpm-wakeup = <&rcpm 0xf0000020>;
+ clocks = <&clockgen 4 0>;
+ clock-names = "pfe";
+
+ status = "okay";
+ pfe_mac0: ethernet@0 {
+ };
+
+ pfe_mac1: ethernet@1 {
+ };
};
firmware {
Reference in New Issue View Git Blame Copy Permalink