mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 22:47:56 +00:00
b33bfcf9fa
Synchronize the ath11k backports with the current ath-next tree. All of the changes are various bugfixes, there is no new major feature. Signed-off-by: Robert Marko <robimarko@gmail.com>
163 lines
5.3 KiB
Diff
163 lines
5.3 KiB
Diff
From 534a5f99d589cfa6b244b4433c192b6a278a67ff Mon Sep 17 00:00:00 2001
|
|
From: Robert Marko <robimarko@gmail.com>
|
|
Date: Sat, 5 Nov 2022 20:15:40 +0100
|
|
Subject: [PATCH] wifi: ath11k: use unique QRTR instance ID
|
|
|
|
Currently, trying to use AHB + PCI/MHI cards or multiple PCI/MHI cards
|
|
will cause a clash in the QRTR instance node ID and prevent the driver
|
|
from talking via QMI to the card and thus initializing it with:
|
|
[ 9.836329] ath11k c000000.wifi: host capability request failed: 1 90
|
|
[ 9.842047] ath11k c000000.wifi: failed to send qmi host cap: -22
|
|
|
|
So, in order to allow for this combination of cards, especially AHB + PCI
|
|
cards like IPQ8074 + QCN9074 (Used by me and tested on) set the desired
|
|
QRTR instance ID offset by calculating a unique one based on PCI domain
|
|
and bus ID-s and writing it to bits 7-0 of BHI_ERRDBG2 MHI register by
|
|
using the SBL state callback that is added as part of the series.
|
|
We also have to make sure that new QRTR offset is added on top of the
|
|
default QRTR instance ID-s that are currently used in the driver.
|
|
|
|
This finally allows using AHB + PCI or multiple PCI cards on the same
|
|
system.
|
|
|
|
Since this is not supported on QCA6390 and like, its limited to QCN9074
|
|
which is known to support changing QRTR instance ID.
|
|
|
|
Before:
|
|
root@OpenWrt:/# qrtr-lookup
|
|
Service Version Instance Node Port
|
|
1054 1 0 7 1 <unknown>
|
|
69 1 2 7 3 ATH10k WLAN firmware service
|
|
|
|
After:
|
|
root@OpenWrt:/# qrtr-lookup
|
|
Service Version Instance Node Port
|
|
1054 1 0 7 1 <unknown>
|
|
69 1 2 7 3 ATH10k WLAN firmware service
|
|
15 1 0 8 1 Test service
|
|
69 1 8 8 2 ATH10k WLAN firmware service
|
|
|
|
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1
|
|
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1
|
|
|
|
Signed-off-by: Robert Marko <robimarko@gmail.com>
|
|
---
|
|
drivers/net/wireless/ath/ath11k/mhi.c | 49 ++++++++++++++++++---------
|
|
drivers/net/wireless/ath/ath11k/mhi.h | 3 ++
|
|
drivers/net/wireless/ath/ath11k/pci.c | 9 ++++-
|
|
3 files changed, 44 insertions(+), 17 deletions(-)
|
|
|
|
--- a/drivers/net/wireless/ath/ath11k/mhi.c
|
|
+++ b/drivers/net/wireless/ath/ath11k/mhi.c
|
|
@@ -294,6 +294,34 @@ static void ath11k_mhi_op_runtime_put(st
|
|
{
|
|
}
|
|
|
|
+static int ath11k_mhi_op_read_reg(struct mhi_controller *mhi_cntrl,
|
|
+ void __iomem *addr,
|
|
+ u32 *out)
|
|
+{
|
|
+ *out = readl(addr);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void ath11k_mhi_op_write_reg(struct mhi_controller *mhi_cntrl,
|
|
+ void __iomem *addr,
|
|
+ u32 val)
|
|
+{
|
|
+ writel(val, addr);
|
|
+}
|
|
+
|
|
+static void ath11k_mhi_qrtr_instance_set(struct mhi_controller *mhi_cntrl)
|
|
+{
|
|
+ struct ath11k_base *ab = dev_get_drvdata(mhi_cntrl->cntrl_dev);
|
|
+
|
|
+ if (ab->hw_rev == ATH11K_HW_QCN9074_HW10) {
|
|
+ ath11k_mhi_op_write_reg(mhi_cntrl,
|
|
+ mhi_cntrl->bhi + BHI_ERRDBG2,
|
|
+ FIELD_PREP(QRTR_INSTANCE_MASK,
|
|
+ ab->qmi.service_ins_id - ab->hw_params.qmi_service_ins_id));
|
|
+ }
|
|
+}
|
|
+
|
|
static char *ath11k_mhi_op_callback_to_str(enum mhi_callback reason)
|
|
{
|
|
switch (reason) {
|
|
@@ -315,6 +343,8 @@ static char *ath11k_mhi_op_callback_to_s
|
|
return "MHI_CB_FATAL_ERROR";
|
|
case MHI_CB_BW_REQ:
|
|
return "MHI_CB_BW_REQ";
|
|
+ case MHI_CB_EE_SBL_MODE:
|
|
+ return "MHI_CB_EE_SBL_MODE";
|
|
default:
|
|
return "UNKNOWN";
|
|
}
|
|
@@ -337,27 +367,14 @@ static void ath11k_mhi_op_status_cb(stru
|
|
if (!(test_bit(ATH11K_FLAG_UNREGISTERING, &ab->dev_flags)))
|
|
queue_work(ab->workqueue_aux, &ab->reset_work);
|
|
break;
|
|
+ case MHI_CB_EE_SBL_MODE:
|
|
+ ath11k_mhi_qrtr_instance_set(mhi_cntrl);
|
|
+ break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
-static int ath11k_mhi_op_read_reg(struct mhi_controller *mhi_cntrl,
|
|
- void __iomem *addr,
|
|
- u32 *out)
|
|
-{
|
|
- *out = readl(addr);
|
|
-
|
|
- return 0;
|
|
-}
|
|
-
|
|
-static void ath11k_mhi_op_write_reg(struct mhi_controller *mhi_cntrl,
|
|
- void __iomem *addr,
|
|
- u32 val)
|
|
-{
|
|
- writel(val, addr);
|
|
-}
|
|
-
|
|
static int ath11k_mhi_read_addr_from_dt(struct mhi_controller *mhi_ctrl)
|
|
{
|
|
struct device_node *np;
|
|
--- a/drivers/net/wireless/ath/ath11k/mhi.h
|
|
+++ b/drivers/net/wireless/ath/ath11k/mhi.h
|
|
@@ -16,6 +16,9 @@
|
|
#define MHICTRL 0x38
|
|
#define MHICTRL_RESET_MASK 0x2
|
|
|
|
+#define BHI_ERRDBG2 0x38
|
|
+#define QRTR_INSTANCE_MASK GENMASK(7, 0)
|
|
+
|
|
int ath11k_mhi_start(struct ath11k_pci *ar_pci);
|
|
void ath11k_mhi_stop(struct ath11k_pci *ar_pci);
|
|
int ath11k_mhi_register(struct ath11k_pci *ar_pci);
|
|
--- a/drivers/net/wireless/ath/ath11k/pci.c
|
|
+++ b/drivers/net/wireless/ath/ath11k/pci.c
|
|
@@ -371,13 +371,20 @@ static void ath11k_pci_sw_reset(struct a
|
|
static void ath11k_pci_init_qmi_ce_config(struct ath11k_base *ab)
|
|
{
|
|
struct ath11k_qmi_ce_cfg *cfg = &ab->qmi.ce_cfg;
|
|
+ struct ath11k_pci *ab_pci = ath11k_pci_priv(ab);
|
|
+ struct pci_bus *bus = ab_pci->pdev->bus;
|
|
|
|
cfg->tgt_ce = ab->hw_params.target_ce_config;
|
|
cfg->tgt_ce_len = ab->hw_params.target_ce_count;
|
|
|
|
cfg->svc_to_ce_map = ab->hw_params.svc_to_ce_map;
|
|
cfg->svc_to_ce_map_len = ab->hw_params.svc_to_ce_map_len;
|
|
- ab->qmi.service_ins_id = ab->hw_params.qmi_service_ins_id;
|
|
+
|
|
+ if (ab->hw_rev == ATH11K_HW_QCN9074_HW10) {
|
|
+ ab->qmi.service_ins_id = ab->hw_params.qmi_service_ins_id +
|
|
+ (((pci_domain_nr(bus) & 0xF) << 4) | (bus->number & 0xF));
|
|
+ } else
|
|
+ ab->qmi.service_ins_id = ab->hw_params.qmi_service_ins_id;
|
|
|
|
ath11k_ce_get_shadow_config(ab, &cfg->shadow_reg_v2,
|
|
&cfg->shadow_reg_v2_len);
|