ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-24 07:46:48 +00:00
Code Issues Actions 5 Packages Projects Releases Wiki Activity
b30f2281cc
openwrt/target/linux/ramips/image/mt76x8.mk
David Bauer b30f2281cc ramips: add support for GL.iNet microuter-N300 
The GL.iNet microuter-N300 (internally referred as MT300N-v4) is a
pocket-size travel router. It is essentially identical to the VIXMINI
(internally referred as MT300N-v3) but with double the RAM and
SPI-flash.

Additionally, set the label-mac for both the VIXMINI as well as the
microuter-N300.

Hardware
--------
SoC:   MediaTek MT7628NN
RAM:   128M DDR2
FLASH: 16M
LED:   Power - WLAN
BTN:   Reset
UART:  115200 8N1
       TX and RX are labled on the board as pads next to the SoC

Installation via web-interface
------------------------------
1. Visit the web-interface at 192.168.8.1
   Note: The ethernet port is by default WAN. So you need to connect to
   the router via WiFi

2. Navigate to the Update tab on the left side.

3. Select "Local Update"

4. Upload the OpenWrt sysupgrade image.
   Note: Make sure you select not to preserve the configuration.

Installation via U-Boot
-----------------------
1. Hold down the reset button while powering on the device.
   Wait for the LED to flash 5 times.

2. Assign yourself a static IPv4 in 192.168.1.0/24

3. Upload the OpenWrt sysupgrade image at 192.168.1.1.

Signed-off-by: David Bauer <mail@david-bauer.net>
2020-01-29 15:10:54 +01:00

611 lines
16 KiB
Makefile
Raw Blame History

#
# MT76x8 Profiles
#
DEFAULT_SOC := mt7628an
define Device/alfa-network_awusfree1
IMAGE_SIZE := 7872k
DEVICE_VENDOR := ALFA Network
DEVICE_MODEL := AWUSFREE1
DEVICE_PACKAGES := uboot-envtools
endef
TARGET_DEVICES += alfa-network_awusfree1
define Device/buffalo_wcr-1166ds
IMAGE_SIZE := 7936k
BUFFALO_TAG_PLATFORM := MTK
BUFFALO_TAG_VERSION := 9.99
BUFFALO_TAG_MINOR := 9.99
IMAGES += factory.bin
IMAGE/sysupgrade.bin := trx | pad-rootfs | append-metadata
IMAGE/factory.bin := trx -M 0x746f435c | pad-rootfs | append-metadata | \
buffalo-enc WCR-1166DS $$(BUFFALO_TAG_VERSION) -l | \
buffalo-tag-dhp WCR-1166DS JP JP | buffalo-enc-tag -l | buffalo-dhp-image
DEVICE_VENDOR := Buffalo
DEVICE_MODEL := WCR-1166DS
DEVICE_PACKAGES := kmod-mt76x2
SUPPORTED_DEVICES += wcr-1166ds
endef
TARGET_DEVICES += buffalo_wcr-1166ds
define Device/cudy_wr1000
IMAGE_SIZE := 7872k
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
jcg-header 92.122
JCG_MAXSIZE := 7872k
DEVICE_VENDOR := Cudy
DEVICE_MODEL := WR1000
DEVICE_PACKAGES := kmod-mt76x2
SUPPORTED_DEVICES += wr1000
endef
TARGET_DEVICES += cudy_wr1000
define Device/d-team_pbr-d1
IMAGE_SIZE := 16064k
DEVICE_VENDOR := PandoraBox
DEVICE_MODEL := PBR-D1
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
SUPPORTED_DEVICES += pbr-d1
endef
TARGET_DEVICES += d-team_pbr-d1
define Device/duzun_dm06
IMAGE_SIZE := 7872k
DEVICE_VENDOR := DuZun
DEVICE_MODEL := DM06
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
SUPPORTED_DEVICES += duzun-dm06
endef
TARGET_DEVICES += duzun_dm06
define Device/glinet_gl-mt300n-v2
IMAGE_SIZE := 16064k
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := GL-MT300N
DEVICE_VARIANT := V2
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
SUPPORTED_DEVICES += gl-mt300n-v2
endef
TARGET_DEVICES += glinet_gl-mt300n-v2
define Device/glinet_microuter-n300
IMAGE_SIZE := 16064k
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := microuter-N300
SUPPORTED_DEVICES += microuter-n300
endef
TARGET_DEVICES += glinet_microuter-n300
define Device/glinet_vixmini
IMAGE_SIZE := 7872k
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := VIXMINI
SUPPORTED_DEVICES += vixmini
endef
TARGET_DEVICES += glinet_vixmini
define Device/hilink_hlk-7628n
IMAGE_SIZE := 32448k
DEVICE_VENDOR := HILINK
DEVICE_MODEL := HLK-7628N
endef
TARGET_DEVICES += hilink_hlk-7628n
define Device/hiwifi_hc5661a
IMAGE_SIZE := 15808k
DEVICE_VENDOR := HiWiFi
DEVICE_MODEL := HC5661A
SUPPORTED_DEVICES += hc5661a
endef
TARGET_DEVICES += hiwifi_hc5661a
define Device/hiwifi_hc5761a
IMAGE_SIZE := 15808k
DEVICE_VENDOR := HiWiFi
DEVICE_MODEL := HC5761A
DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += hiwifi_hc5761a
define Device/hiwifi_hc5861b
IMAGE_SIZE := 15808k
DEVICE_VENDOR := HiWiFi
DEVICE_MODEL := HC5861B
DEVICE_PACKAGES := kmod-mt76x2
endef
TARGET_DEVICES += hiwifi_hc5861b
define Device/iptime_a3
IMAGE_SIZE := 7936k
UIMAGE_NAME := a3
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := A3
DEVICE_PACKAGES := kmod-mt76x2
endef
TARGET_DEVICES += iptime_a3
define Device/iptime_a604m
IMAGE_SIZE := 7936k
UIMAGE_NAME := a604m
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := A604M
DEVICE_PACKAGES := kmod-mt76x2
endef
TARGET_DEVICES += iptime_a604m
define Device/mediatek_linkit-smart-7688
IMAGE_SIZE := 32448k
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := LinkIt Smart 7688
DEVICE_PACKAGES:= kmod-usb2 kmod-usb-ohci uboot-envtools kmod-sdhci-mt7620
SUPPORTED_DEVICES += linkits7688 linkits7688d
endef
TARGET_DEVICES += mediatek_linkit-smart-7688
define Device/mediatek_mt7628an-eval-board
BLOCKSIZE := 64k
IMAGE_SIZE := 7872k
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := MT7628 EVB
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
SUPPORTED_DEVICES += mt7628
endef
TARGET_DEVICES += mediatek_mt7628an-eval-board
define Device/mercury_mac1200r-v2
IMAGE_SIZE := 7936k
DEVICE_VENDOR := Mercury
DEVICE_MODEL := MAC1200R
DEVICE_VARIANT := v2.0
SUPPORTED_DEVICES := mac1200rv2
DEVICE_PACKAGES := kmod-mt76x2
SUPPORTED_DEVICES += mac1200rv2
endef
TARGET_DEVICES += mercury_mac1200r-v2
define Device/netgear_r6120
BLOCKSIZE := 64k
IMAGE_SIZE := 15744k
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := R6120
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci
SERCOMM_HWID := CGQ
SERCOMM_HWVER := A001
SERCOMM_SWVER := 0x0040
IMAGES += factory.img
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE)| append-rootfs | \
pad-rootfs
IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | \
check-size $$$$(IMAGE_SIZE)
IMAGE/factory.img := pad-extra 576k | $$(IMAGE/default) | \
pad-to $$$$(BLOCKSIZE) | sercom-footer | pad-to 128 | zip R6120.bin | \
sercom-seal
endef
TARGET_DEVICES += netgear_r6120
define Device/onion_omega2
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Onion
DEVICE_MODEL := Omega2
DEVICE_PACKAGES:= kmod-usb2 kmod-usb-ohci uboot-envtools
SUPPORTED_DEVICES += omega2
endef
TARGET_DEVICES += onion_omega2
define Device/onion_omega2p
IMAGE_SIZE := 32448k
DEVICE_VENDOR := Onion
DEVICE_MODEL := Omega2+
DEVICE_PACKAGES:= kmod-usb2 kmod-usb-ohci uboot-envtools kmod-sdhci-mt7620
SUPPORTED_DEVICES += omega2p
endef
TARGET_DEVICES += onion_omega2p
define Device/rakwireless_rak633
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Rakwireless
DEVICE_MODEL := RAK633
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += rakwireless_rak633
define Device/skylab_skw92a
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Skylab
DEVICE_MODEL := SKW92A
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += skylab_skw92a
define Device/tama_w06
IMAGE_SIZE := 15040k
DEVICE_VENDOR := Tama
DEVICE_MODEL := W06
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += tama_w06
define Device/totolink_lr1200
IMAGE_SIZE := 7872k
DEVICE_VENDOR := TOTOLINK
DEVICE_MODEL := LR1200
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 uqmi
endef
TARGET_DEVICES += totolink_lr1200
define Device/tplink
DEVICE_VENDOR := TP-Link
TPLINK_FLASHLAYOUT :=
TPLINK_HWID :=
TPLINK_HWREV :=
TPLINK_HWREVADD :=
TPLINK_HVERSION :=
KERNEL := $(KERNEL_DTB)
KERNEL_INITRAMFS := $(KERNEL_DTB) | tplink-v2-header -e
IMAGES += tftp-recovery.bin
IMAGE/factory.bin := tplink-v2-image -e
IMAGE/tftp-recovery.bin := pad-extra 128k | $$(IMAGE/factory.bin)
IMAGE/sysupgrade.bin := tplink-v2-image -s -e | append-metadata | \
check-size $$$$(IMAGE_SIZE)
endef
DEVICE_VARS += TPLINK_FLASHLAYOUT TPLINK_HWID TPLINK_HWREV TPLINK_HWREVADD
DEVICE_VARS += TPLINK_HVERSION
define Device/tplink-safeloader
DEVICE_VENDOR := TP-Link
TPLINK_BOARD_ID :=
TPLINK_HWID := 0x0
TPLINK_HWREV := 0
TPLINK_HEADER_VERSION := 1
KERNEL := $(KERNEL_DTB) | tplink-v1-header -e -O
IMAGES += factory.bin
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | \
append-metadata | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
endef
define Device/tplink_archer-c20-v4
$(Device/tplink)
IMAGE_SIZE := 7808k
DEVICE_MODEL := Archer C20
DEVICE_VARIANT := v4
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0xc200004
TPLINK_HWREV := 0x1
TPLINK_HWREVADD := 0x4
TPLINK_HVERSION := 3
DEVICE_PACKAGES := kmod-mt76x0e
SUPPORTED_DEVICES += tplink,c20-v4
endef
TARGET_DEVICES += tplink_archer-c20-v4
define Device/tplink_archer-c20-v5
$(Device/tplink)
IMAGE_SIZE := 7616k
DEVICE_MODEL := Archer C20
DEVICE_VARIANT := v5
TPLINK_FLASHLAYOUT := 8MSUmtk
TPLINK_HWID := 0xc200005
TPLINK_HWREV := 0x1
TPLINK_HWREVADD := 0x5
TPLINK_HVERSION := 3
DEVICE_PACKAGES := kmod-mt76x0e
IMAGES := sysupgrade.bin
endef
TARGET_DEVICES += tplink_archer-c20-v5
define Device/tplink_archer-c50-v3
$(Device/tplink)
IMAGE_SIZE := 7808k
DEVICE_MODEL := Archer C50
DEVICE_VARIANT := v3
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x001D9BA4
TPLINK_HWREV := 0x79
TPLINK_HWREVADD := 0x1
TPLINK_HVERSION := 3
DEVICE_PACKAGES := kmod-mt76x2
SUPPORTED_DEVICES += tplink,c50-v3
endef
TARGET_DEVICES += tplink_archer-c50-v3
define Device/tplink_archer-c50-v4
$(Device/tplink)
IMAGE_SIZE := 7616k
DEVICE_MODEL := Archer C50
DEVICE_VARIANT := v4
TPLINK_FLASHLAYOUT := 8MSUmtk
TPLINK_HWID := 0x001D589B
TPLINK_HWREV := 0x93
TPLINK_HWREVADD := 0x2
TPLINK_HVERSION := 3
DEVICE_PACKAGES := kmod-mt76x2
IMAGES := sysupgrade.bin
SUPPORTED_DEVICES += tplink,c50-v4
endef
TARGET_DEVICES += tplink_archer-c50-v4
define Device/tplink_re305-v1
$(Device/tplink-safeloader)
IMAGE_SIZE := 6016k
DEVICE_MODEL := RE305
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt76x2
TPLINK_BOARD_ID := RE305-V1
endef
TARGET_DEVICES += tplink_re305-v1
define Device/tplink_tl-mr3020-v3
$(Device/tplink)
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-MR3020
DEVICE_VARIANT := v3
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x30200003
TPLINK_HWREV := 0x3
TPLINK_HWREVADD := 0x3
TPLINK_HVERSION := 3
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += tplink_tl-mr3020-v3
define Device/tplink_tl-mr3420-v5
$(Device/tplink)
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-MR3420
DEVICE_VARIANT := v5
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x34200005
TPLINK_HWREV := 0x5
TPLINK_HWREVADD := 0x5
TPLINK_HVERSION := 3
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += tplink_tl-mr3420-v5
define Device/tplink_tl-wa801nd-v5
$(Device/tplink)
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-WA801ND
DEVICE_VARIANT := v5
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x08010005
TPLINK_HWREV := 0x1
TPLINK_HWREVADD := 0x5
TPLINK_HVERSION := 3
endef
TARGET_DEVICES += tplink_tl-wa801nd-v5
define Device/tplink_tl-wr802n-v4
$(Device/tplink)
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-WR802N
DEVICE_VARIANT := v4
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x08020004
TPLINK_HWREV := 0x1
TPLINK_HWREVADD := 0x4
TPLINK_HVERSION := 3
endef
TARGET_DEVICES += tplink_tl-wr802n-v4
define Device/tplink_tl-wr840n-v4
$(Device/tplink)
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-WR840N
DEVICE_VARIANT := v4
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x08400004
TPLINK_HWREV := 0x1
TPLINK_HWREVADD := 0x4
TPLINK_HVERSION := 3
SUPPORTED_DEVICES += tl-wr840n-v4
endef
TARGET_DEVICES += tplink_tl-wr840n-v4
define Device/tplink_tl-wr840n-v5
IMAGE_SIZE := 3904k
DEVICE_VENDOR := TP-Link
DEVICE_MODEL := TL-WR840N
DEVICE_VARIANT := v5
TPLINK_FLASHLAYOUT := 4Mmtk
TPLINK_HWID := 0x08400005
TPLINK_HWREV := 0x1
TPLINK_HWREVADD := 0x5
TPLINK_HVERSION := 3
KERNEL := $(KERNEL_DTB)
KERNEL_INITRAMFS := $(KERNEL_DTB) | tplink-v2-header -e
IMAGE/sysupgrade.bin := tplink-v2-image -s -e | append-metadata | \
check-size $$$$(IMAGE_SIZE)
SUPPORTED_DEVICES += tl-wr840n-v5
endef
TARGET_DEVICES += tplink_tl-wr840n-v5
define Device/tplink_tl-wr841n-v13
$(Device/tplink)
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-WR841N
DEVICE_VARIANT := v13
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x08410013
TPLINK_HWREV := 0x268
TPLINK_HWREVADD := 0x13
TPLINK_HVERSION := 3
SUPPORTED_DEVICES += tl-wr841n-v13
endef
TARGET_DEVICES += tplink_tl-wr841n-v13
define Device/tplink_tl-wr841n-v14
$(Device/tplink)
IMAGE_SIZE := 3968k
DEVICE_MODEL := TL-WR841N
DEVICE_VARIANT := v14
TPLINK_FLASHLAYOUT := 4Mmtk
TPLINK_HWID := 0x08410014
TPLINK_HWREV := 0x1
TPLINK_HWREVADD := 0x14
TPLINK_HVERSION := 3
IMAGE/tftp-recovery.bin := pad-extra 64k | $$(IMAGE/factory.bin)
endef
TARGET_DEVICES += tplink_tl-wr841n-v14
define Device/tplink_tl-wr842n-v5
$(Device/tplink)
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-WR842N
DEVICE_VARIANT := v5
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x08420005
TPLINK_HWREV := 0x5
TPLINK_HWREVADD := 0x5
TPLINK_HVERSION := 3
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += tplink_tl-wr842n-v5
define Device/tplink_tl-wr902ac-v3
$(Device/tplink)
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-WR902AC
DEVICE_VARIANT := v3
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x000dc88f
TPLINK_HWREV := 0x89
TPLINK_HWREVADD := 0x1
TPLINK_HVERSION := 3
DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-ohci \
kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += tplink_tl-wr902ac-v3
define Device/unielec_u7628-01-16m
IMAGE_SIZE := 16064k
DEVICE_VENDOR := UniElec
DEVICE_MODEL := U7628-01
DEVICE_VARIANT := 16M
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
SUPPORTED_DEVICES += u7628-01-128M-16M unielec,u7628-01-128m-16m
endef
TARGET_DEVICES += unielec_u7628-01-16m
define Device/vocore_vocore2
IMAGE_SIZE := 16064k
DEVICE_VENDOR := VoCore
DEVICE_MODEL := VoCore2
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport \
kmod-sdhci-mt7620
SUPPORTED_DEVICES += vocore2
endef
TARGET_DEVICES += vocore_vocore2
define Device/vocore_vocore2-lite
IMAGE_SIZE := 7872k
DEVICE_VENDOR := VoCore
DEVICE_MODEL := VoCore2-Lite
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport \
kmod-sdhci-mt7620
SUPPORTED_DEVICES += vocore2lite
endef
TARGET_DEVICES += vocore_vocore2-lite
define Device/wavlink_wl-wn570ha1
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Wavlink
DEVICE_MODEL := WL-WN570HA1
DEVICE_PACKAGES := kmod-mt76x0e
endef
TARGET_DEVICES += wavlink_wl-wn570ha1
define Device/wavlink_wl-wn575a3
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Wavlink
DEVICE_MODEL := WL-WN575A3
DEVICE_PACKAGES := kmod-mt76x2
SUPPORTED_DEVICES += wl-wn575a3
endef
TARGET_DEVICES += wavlink_wl-wn575a3
define Device/widora_neo-16m
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Widora
DEVICE_MODEL := Widora-NEO
DEVICE_VARIANT := 16M
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
SUPPORTED_DEVICES += widora-neo
endef
TARGET_DEVICES += widora_neo-16m
define Device/widora_neo-32m
IMAGE_SIZE := 32448k
DEVICE_VENDOR := Widora
DEVICE_MODEL := Widora-NEO
DEVICE_VARIANT := 32M
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += widora_neo-32m
define Device/wiznet_wizfi630s
IMAGE_SIZE := 32448k
DEVICE_VENDOR := WIZnet
DEVICE_MODEL := WizFi630S
endef
TARGET_DEVICES += wiznet_wizfi630s
define Device/wrtnode_wrtnode2p
IMAGE_SIZE := 32448k
DEVICE_VENDOR := WRTnode
DEVICE_MODEL := WRTnode 2P
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
SUPPORTED_DEVICES += wrtnode2p
endef
TARGET_DEVICES += wrtnode_wrtnode2p
define Device/wrtnode_wrtnode2r
IMAGE_SIZE := 32448k
DEVICE_VENDOR := WRTnode
DEVICE_MODEL := WRTnode 2R
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
SUPPORTED_DEVICES += wrtnode2r
endef
TARGET_DEVICES += wrtnode_wrtnode2r
define Device/xiaomi_mir4a-100m
IMAGE_SIZE := 14976k
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Mi Router 4A
DEVICE_VARIANT := 100M Edition
DEVICE_PACKAGES := kmod-mt76x2
endef
TARGET_DEVICES += xiaomi_mir4a-100m
define Device/xiaomi_miwifi-nano
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := MiWiFi Nano
DEVICE_PACKAGES := uboot-envtools
SUPPORTED_DEVICES += miwifi-nano
endef
TARGET_DEVICES += xiaomi_miwifi-nano
define Device/zbtlink_zbt-we1226
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WE1226
endef
TARGET_DEVICES += zbtlink_zbt-we1226
define Device/zyxel_keenetic-extra-ii
IMAGE_SIZE := 14912k
BLOCKSIZE := 64k
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := Keenetic Extra II
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci \
kmod-usb-ledtrig-usbport
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | pad-to $$$$(BLOCKSIZE) | \
check-size $$$$(IMAGE_SIZE) | zyimage -d 6162 -v "ZyXEL Keenetic Extra II"
endef
TARGET_DEVICES += zyxel_keenetic-extra-ii
Reference in New Issue View Git Blame Copy Permalink