mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 16:31:13 +00:00
6a05a85dcb
This adds the new rockchip target and support for RockPro64 RK3399 Flash: 16 MiB SPI NOR RAM: 2 GiB/4 GiB LPDDR4 SoC: RK3399 USB: 2x USB 2.0, 1x USB 3.0, 1x USB-C Ethernet: 1x GbE PCIe: PCIe 2.0, 4 lanes Storage: eMMC or SD card Optional SDIO wifi/bt module The Pine64 RockPro64 is a single-board-computer with a 4x PCIe connector, 6 ARM64 cores (4 little, 2 big), plenty of RAM and storage. By default the single Gigabit-Ethernet port is configured as the LAN port. Installation of the firware is possible by dd'ing the image to an SD card or the eMMC flash. Serial: 3v3 1500000 8n1 U-boot is build from the mainline tree and integrated into the images. Required ATF to build u-boot is downloaded from a CI build bot. Signed-off-by: Tobias Mädel <t.maedel@alfeld.de> Tested-by: Tobias Schramm <t.schramm@manjaro.org>
64 lines
1.9 KiB
Makefile
64 lines
1.9 KiB
Makefile
#
|
|
# This is free software, licensed under the GNU General Public License v2.
|
|
# See /LICENSE for more information.
|
|
#
|
|
include $(TOPDIR)/rules.mk
|
|
include $(INCLUDE_DIR)/image.mk
|
|
|
|
DEVICE_VARS += UBOOT_DEVICE_NAME
|
|
|
|
define Build/Compile
|
|
$(CP) $(LINUX_DIR)/COPYING $(KDIR)/COPYING.linux
|
|
endef
|
|
|
|
### Image scripts ###
|
|
define Build/boot-common
|
|
# This creates a new folder copies the dtb (as rockchip.dtb)
|
|
# and the kernel image (as kernel.img)
|
|
rm -fR $@.boot
|
|
mkdir -p $@.boot
|
|
|
|
$(CP) $(DTS_DIR)/$(DEVICE_DTS).dtb $@.boot/rockchip.dtb
|
|
$(CP) $(IMAGE_KERNEL) $@.boot/kernel.img
|
|
endef
|
|
|
|
define Build/boot-script
|
|
# Make an U-boot image and copy it to the boot partition
|
|
mkimage -A arm -O linux -T script -C none -a 0 -e 0 -d mmc.bootscript $@.boot/boot.scr
|
|
endef
|
|
|
|
define Build/pine64-img
|
|
# Creates the final SD/eMMC images,
|
|
# combining boot partition, root partition as well as the u-boot bootloader
|
|
|
|
# Generate a new partition table in $@ with 32 MiB of
|
|
# alignment padding for the idbloader and u-boot to fit:
|
|
# http://opensource.rock-chips.com/wiki_Boot_option#Boot_flow
|
|
#
|
|
# U-Boot SPL expects the U-Boot ITB to be located at sector 0x4000 (8 MiB) on the MMC storage
|
|
$(SCRIPT_DIR)/gen_image_generic.sh \
|
|
$@ \
|
|
$(CONFIG_TARGET_KERNEL_PARTSIZE) $@.boot \
|
|
$(CONFIG_TARGET_ROOTFS_PARTSIZE) $(IMAGE_ROOTFS) \
|
|
32768
|
|
|
|
# Copy the idbloader and the u-boot image to the image at sector 0x40 and 0x4000
|
|
dd if="$(STAGING_DIR_IMAGE)"/$(UBOOT_DEVICE_NAME)-idbloader.img of="$@" seek=64 conv=notrunc
|
|
dd if="$(STAGING_DIR_IMAGE)"/$(UBOOT_DEVICE_NAME)-u-boot.itb of="$@" seek=16384 conv=notrunc
|
|
endef
|
|
|
|
### Devices ###
|
|
define Device/Default
|
|
PROFILES := Default
|
|
KERNEL := kernel-bin
|
|
IMAGES := sysupgrade.img.gz
|
|
SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
|
|
DEVICE_DTS = rockchip/$$(SOC)-$(lastword $(subst _, ,$(1)))
|
|
endef
|
|
|
|
ifeq ($(SUBTARGET),armv8)
|
|
include armv8.mk
|
|
endif
|
|
|
|
$(eval $(call BuildImage))
|