mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 15:02:32 +00:00
6092c39c13
Backport in-SoC Gigabit Ethernet PHY driver instead of carrying the
driver in files-5.15.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 9fac590096)
214 lines
6.6 KiB
Diff
214 lines
6.6 KiB
Diff
From 5d2d78860f98eb5c03bc404eb024606878901ac8 Mon Sep 17 00:00:00 2001
|
|
From: Daniel Golle <daniel@makrotopia.org>
|
|
Date: Tue, 13 Jun 2023 03:27:14 +0100
|
|
Subject: [PATCH] net: phy: mediatek-ge-soc: initialize MT7988 PHY LEDs default
|
|
state
|
|
|
|
Initialize LEDs and set sane default values.
|
|
Read boottrap register and apply LED polarities accordingly to get
|
|
uniform behavior from all LEDs on MT7988.
|
|
Requires syscon phandle 'mediatek,pio' present in parenting MDIO bus
|
|
which should point to the syscon holding the boottrap register.
|
|
|
|
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
|
|
---
|
|
drivers/net/phy/mediatek-ge-soc.c | 144 ++++++++++++++++++++++++++++--
|
|
1 file changed, 136 insertions(+), 8 deletions(-)
|
|
|
|
--- a/drivers/net/phy/mediatek-ge-soc.c
|
|
+++ b/drivers/net/phy/mediatek-ge-soc.c
|
|
@@ -1,11 +1,13 @@
|
|
// SPDX-License-Identifier: GPL-2.0+
|
|
#include <linux/bitfield.h>
|
|
+#include <linux/mfd/syscon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/nvmem-consumer.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/phy.h>
|
|
+#include <linux/regmap.h>
|
|
|
|
#define MTK_GPHY_ID_MT7981 0x03a29461
|
|
#define MTK_GPHY_ID_MT7988 0x03a29481
|
|
@@ -208,9 +210,40 @@
|
|
#define MTK_PHY_DA_TX_R50_PAIR_C 0x53f
|
|
#define MTK_PHY_DA_TX_R50_PAIR_D 0x540
|
|
|
|
+/* Registers on MDIO_MMD_VEND2 */
|
|
+#define MTK_PHY_LED0_ON_CTRL 0x24
|
|
+#define MTK_PHY_LED1_ON_CTRL 0x26
|
|
+#define MTK_PHY_LED_ON_MASK GENMASK(6, 0)
|
|
+#define MTK_PHY_LED_ON_LINK1000 BIT(0)
|
|
+#define MTK_PHY_LED_ON_LINK100 BIT(1)
|
|
+#define MTK_PHY_LED_ON_LINK10 BIT(2)
|
|
+#define MTK_PHY_LED_ON_LINKDOWN BIT(3)
|
|
+#define MTK_PHY_LED_ON_FDX BIT(4) /* Full duplex */
|
|
+#define MTK_PHY_LED_ON_HDX BIT(5) /* Half duplex */
|
|
+#define MTK_PHY_LED_FORCE_ON BIT(6)
|
|
+#define MTK_PHY_LED_POLARITY BIT(14)
|
|
+#define MTK_PHY_LED_ENABLE BIT(15)
|
|
+
|
|
+#define MTK_PHY_LED0_BLINK_CTRL 0x25
|
|
+#define MTK_PHY_LED1_BLINK_CTRL 0x27
|
|
+#define MTK_PHY_LED_1000TX BIT(0)
|
|
+#define MTK_PHY_LED_1000RX BIT(1)
|
|
+#define MTK_PHY_LED_100TX BIT(2)
|
|
+#define MTK_PHY_LED_100RX BIT(3)
|
|
+#define MTK_PHY_LED_10TX BIT(4)
|
|
+#define MTK_PHY_LED_10RX BIT(5)
|
|
+#define MTK_PHY_LED_COLLISION BIT(6)
|
|
+#define MTK_PHY_LED_RX_CRC_ERR BIT(7)
|
|
+#define MTK_PHY_LED_RX_IDLE_ERR BIT(8)
|
|
+#define MTK_PHY_LED_FORCE_BLINK BIT(9)
|
|
+
|
|
#define MTK_PHY_RG_BG_RASEL 0x115
|
|
#define MTK_PHY_RG_BG_RASEL_MASK GENMASK(2, 0)
|
|
|
|
+/* Register in boottrap syscon defining the initial state of the 4 PHY LEDs */
|
|
+#define RG_GPIO_MISC_TPBANK0 0x6f0
|
|
+#define RG_GPIO_MISC_TPBANK0_BOOTMODE GENMASK(11, 8)
|
|
+
|
|
/* These macro privides efuse parsing for internal phy. */
|
|
#define EFS_DA_TX_I2MPB_A(x) (((x) >> 0) & GENMASK(5, 0))
|
|
#define EFS_DA_TX_I2MPB_B(x) (((x) >> 6) & GENMASK(5, 0))
|
|
@@ -238,13 +271,6 @@ enum {
|
|
PAIR_D,
|
|
};
|
|
|
|
-enum {
|
|
- GPHY_PORT0,
|
|
- GPHY_PORT1,
|
|
- GPHY_PORT2,
|
|
- GPHY_PORT3,
|
|
-};
|
|
-
|
|
enum calibration_mode {
|
|
EFUSE_K,
|
|
SW_K
|
|
@@ -263,6 +289,10 @@ enum CAL_MODE {
|
|
SW_M
|
|
};
|
|
|
|
+struct mtk_socphy_shared {
|
|
+ u32 boottrap;
|
|
+};
|
|
+
|
|
static int mtk_socphy_read_page(struct phy_device *phydev)
|
|
{
|
|
return __phy_read(phydev, MTK_EXT_PAGE_ACCESS);
|
|
@@ -1073,6 +1103,104 @@ static int mt798x_phy_config_init(struct
|
|
return mt798x_phy_calibration(phydev);
|
|
}
|
|
|
|
+static int mt798x_phy_setup_led(struct phy_device *phydev, bool inverted)
|
|
+{
|
|
+ struct pinctrl *pinctrl;
|
|
+ const u16 led_on_ctrl_defaults = MTK_PHY_LED_ENABLE |
|
|
+ MTK_PHY_LED_ON_LINK1000 |
|
|
+ MTK_PHY_LED_ON_LINK100 |
|
|
+ MTK_PHY_LED_ON_LINK10;
|
|
+ const u16 led_blink_defaults = MTK_PHY_LED_1000TX |
|
|
+ MTK_PHY_LED_1000RX |
|
|
+ MTK_PHY_LED_100TX |
|
|
+ MTK_PHY_LED_100RX |
|
|
+ MTK_PHY_LED_10TX |
|
|
+ MTK_PHY_LED_10RX;
|
|
+
|
|
+ phy_write_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_ON_CTRL,
|
|
+ led_on_ctrl_defaults ^
|
|
+ (inverted ? MTK_PHY_LED_POLARITY : 0));
|
|
+
|
|
+ phy_write_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED1_ON_CTRL,
|
|
+ led_on_ctrl_defaults);
|
|
+
|
|
+ phy_write_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_BLINK_CTRL,
|
|
+ led_blink_defaults);
|
|
+
|
|
+ phy_write_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED1_BLINK_CTRL,
|
|
+ led_blink_defaults);
|
|
+
|
|
+ pinctrl = devm_pinctrl_get_select(&phydev->mdio.dev, "gbe-led");
|
|
+ if (IS_ERR(pinctrl))
|
|
+ dev_err(&phydev->mdio.bus->dev, "Failed to setup PHY LED\n");
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int mt7988_phy_probe_shared(struct phy_device *phydev)
|
|
+{
|
|
+ struct device_node *np = dev_of_node(&phydev->mdio.bus->dev);
|
|
+ struct mtk_socphy_shared *priv = phydev->shared->priv;
|
|
+ struct regmap *regmap;
|
|
+ u32 reg;
|
|
+ int ret;
|
|
+
|
|
+ /* The LED0 of the 4 PHYs in MT7988 are wired to SoC pins LED_A, LED_B,
|
|
+ * LED_C and LED_D respectively. At the same time those pins are used to
|
|
+ * bootstrap configuration of the reference clock source (LED_A),
|
|
+ * DRAM DDRx16b x2/x1 (LED_B) and boot device (LED_C, LED_D).
|
|
+ * In practise this is done using a LED and a resistor pulling the pin
|
|
+ * either to GND or to VIO.
|
|
+ * The detected value at boot time is accessible at run-time using the
|
|
+ * TPBANK0 register located in the gpio base of the pinctrl, in order
|
|
+ * to read it here it needs to be referenced by a phandle called
|
|
+ * 'mediatek,pio' in the MDIO bus hosting the PHY.
|
|
+ * The 4 bits in TPBANK0 are kept as package shared data and are used to
|
|
+ * set LED polarity for each of the LED0.
|
|
+ */
|
|
+ regmap = syscon_regmap_lookup_by_phandle(np, "mediatek,pio");
|
|
+ if (IS_ERR(regmap))
|
|
+ return PTR_ERR(regmap);
|
|
+
|
|
+ ret = regmap_read(regmap, RG_GPIO_MISC_TPBANK0, ®);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
+ priv->boottrap = FIELD_GET(RG_GPIO_MISC_TPBANK0_BOOTMODE, reg);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static bool mt7988_phy_get_boottrap_polarity(struct phy_device *phydev)
|
|
+{
|
|
+ struct mtk_socphy_shared *priv = phydev->shared->priv;
|
|
+
|
|
+ if (priv->boottrap & BIT(phydev->mdio.addr))
|
|
+ return false;
|
|
+
|
|
+ return true;
|
|
+}
|
|
+
|
|
+static int mt7988_phy_probe(struct phy_device *phydev)
|
|
+{
|
|
+ int err;
|
|
+
|
|
+ err = devm_phy_package_join(&phydev->mdio.dev, phydev, 0,
|
|
+ sizeof(struct mtk_socphy_shared));
|
|
+ if (err)
|
|
+ return err;
|
|
+
|
|
+ if (phy_package_probe_once(phydev)) {
|
|
+ err = mt7988_phy_probe_shared(phydev);
|
|
+ if (err)
|
|
+ return err;
|
|
+ }
|
|
+
|
|
+ mt798x_phy_setup_led(phydev, mt7988_phy_get_boottrap_polarity(phydev));
|
|
+
|
|
+ return mt798x_phy_calibration(phydev);
|
|
+}
|
|
+
|
|
static struct phy_driver mtk_socphy_driver[] = {
|
|
{
|
|
PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981),
|
|
@@ -1092,7 +1220,7 @@ static struct phy_driver mtk_socphy_driv
|
|
.config_init = mt798x_phy_config_init,
|
|
.config_intr = genphy_no_config_intr,
|
|
.handle_interrupt = genphy_handle_interrupt_no_ack,
|
|
- .probe = mt798x_phy_calibration,
|
|
+ .probe = mt7988_phy_probe,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
.read_page = mtk_socphy_read_page,
|