mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-28 17:48:58 +00:00
6961fe98ec
Router Asus TUF AX6000 have second MaxLinear GPY211 PHY controller for 2.5Gb LAN port. The 5'th LAN port have inverted status of the LED. Based on the commit from main branch90fbec8we could set proper status of the LED. Signed-off-by: Patryk Kowalczyk <patryk@kowalczyk.ws> (cherry picked from commitb22539b5fe) Signed-off-by: Tom Herbers <mail@tomherbers.de>
384 lines
6.7 KiB
Plaintext
384 lines
6.7 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
#include "mt7986a.dtsi"
|
|
|
|
/ {
|
|
model = "ASUS TUF-AX6000";
|
|
compatible = "asus,tuf-ax6000", "mediatek,mt7986a";
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
led-boot = &led_system;
|
|
led-failsafe = &led_system;
|
|
led-running = &led_system;
|
|
led-upgrade = &led_system;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
bootargs-override = "ubi.mtd=UBI_DEV";
|
|
};
|
|
|
|
memory {
|
|
reg = <0 0x40000000 0 0x20000000>;
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
|
|
mesh {
|
|
label = "wps";
|
|
gpios = <&pio 10 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
wlan {
|
|
label = "white:wlan";
|
|
gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "phy1tpt";
|
|
};
|
|
|
|
led_system: system {
|
|
label = "white:system";
|
|
gpios = <&pio 11 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
wan-red {
|
|
label = "red:wan";
|
|
gpios = <&pio 12 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
cover-blue {
|
|
label = "blue:cover";
|
|
gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
reg_3p3v: regulator-3p3v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_5v: regulator-5v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-5V";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
|
|
&crypto {
|
|
status = "okay";
|
|
};
|
|
|
|
ð {
|
|
status = "okay";
|
|
|
|
gmac0: mac@0 {
|
|
/* LAN */
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <0>;
|
|
phy-mode = "2500base-x";
|
|
|
|
fixed-link {
|
|
speed = <2500>;
|
|
full-duplex;
|
|
pause;
|
|
};
|
|
};
|
|
|
|
gmac1: mac@1 {
|
|
/* WAN */
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <1>;
|
|
phy-mode = "2500base-x";
|
|
phy-handle = <&phy6>;
|
|
};
|
|
|
|
mdio: mdio-bus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&mdio {
|
|
reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
|
|
reset-delay-us = <50000>;
|
|
reset-post-delay-us = <20000>;
|
|
|
|
phy5: phy@5 {
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
reg = <5>;
|
|
|
|
mxl,led-drive-vdd;
|
|
mxl,led-config = <0x03f0 0x0 0x0 0x0>;
|
|
};
|
|
|
|
phy6: phy@6 {
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
reg = <6>;
|
|
|
|
/* LED0: CONN (WAN white) */
|
|
mxl,led-config = <0x03f0 0x0 0x0 0x0>;
|
|
};
|
|
|
|
switch: switch@1f {
|
|
compatible = "mediatek,mt7531";
|
|
reg = <31>;
|
|
|
|
reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
|
|
reset-assert-us = <10000>;
|
|
reset-deassert-us = <10000>;
|
|
};
|
|
};
|
|
|
|
&pio {
|
|
spi_flash_pins: spi-flash-pins-33-to-38 {
|
|
mux {
|
|
function = "spi";
|
|
groups = "spi0", "spi0_wp_hold";
|
|
};
|
|
conf-pu {
|
|
pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
|
|
drive-strength = <8>;
|
|
mediatek,pull-up-adv = <0>; /* bias-disable */
|
|
};
|
|
conf-pd {
|
|
pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
|
|
drive-strength = <8>;
|
|
mediatek,pull-down-adv = <0>; /* bias-disable */
|
|
};
|
|
};
|
|
|
|
wf_2g_5g_pins: wf_2g_5g-pins {
|
|
mux {
|
|
function = "wifi";
|
|
groups = "wf_2g", "wf_5g";
|
|
};
|
|
conf {
|
|
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
|
|
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
|
|
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
|
|
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
|
|
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
|
|
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
|
|
"WF1_TOP_CLK", "WF1_TOP_DATA";
|
|
drive-strength = <4>;
|
|
};
|
|
};
|
|
|
|
wf_dbdc_pins: wf-dbdc-pins {
|
|
mux {
|
|
function = "wifi";
|
|
groups = "wf_dbdc";
|
|
};
|
|
conf {
|
|
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
|
|
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
|
|
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
|
|
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
|
|
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
|
|
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
|
|
"WF1_TOP_CLK", "WF1_TOP_DATA";
|
|
drive-strength = <4>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&spi0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi_flash_pins>;
|
|
status = "okay";
|
|
|
|
spi_nand_flash: flash@0 {
|
|
compatible = "spi-nand";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0>;
|
|
|
|
spi-max-frequency = <20000000>;
|
|
spi-tx-bus-width = <4>;
|
|
spi-rx-bus-width = <4>;
|
|
|
|
partitions: partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "bootloader";
|
|
reg = <0x0 0x400000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@400000 {
|
|
label = "UBI_DEV";
|
|
reg = <0x400000 0xfc00000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&switch {
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@1 {
|
|
reg = <4>;
|
|
label = "lan1";
|
|
};
|
|
|
|
port@2 {
|
|
reg = <3>;
|
|
label = "lan2";
|
|
};
|
|
|
|
port@3 {
|
|
reg = <2>;
|
|
label = "lan3";
|
|
};
|
|
|
|
port@4 {
|
|
reg = <1>;
|
|
label = "lan4";
|
|
};
|
|
|
|
port@5 {
|
|
reg = <5>;
|
|
label = "lan5";
|
|
phy-mode = "2500base-x";
|
|
phy-handle = <&phy5>;
|
|
|
|
};
|
|
|
|
port@6 {
|
|
reg = <6>;
|
|
label = "cpu";
|
|
ethernet = <&gmac0>;
|
|
phy-mode = "2500base-x";
|
|
|
|
fixed-link {
|
|
speed = <2500>;
|
|
full-duplex;
|
|
pause;
|
|
};
|
|
};
|
|
};
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
phy@1 {
|
|
reg = <1>;
|
|
|
|
mediatek,led-config = <
|
|
0x21 0x8009 /* BASIC_CTRL */
|
|
0x22 0x0c00 /* ON_DURATION */
|
|
0x23 0x1400 /* BLINK_DURATION */
|
|
0x24 0x8000 /* LED0_ON_CTRL */
|
|
0x25 0x0000 /* LED0_BLINK_CTRL */
|
|
0x26 0xc007 /* LED1_ON_CTRL */
|
|
0x27 0x003f /* LED1_BLINK_CTRL */
|
|
>;
|
|
};
|
|
|
|
phy@2 {
|
|
reg = <2>;
|
|
|
|
mediatek,led-config = <
|
|
0x21 0x8009 /* BASIC_CTRL */
|
|
0x22 0x0c00 /* ON_DURATION */
|
|
0x23 0x1400 /* BLINK_DURATION */
|
|
0x24 0x8000 /* LED0_ON_CTRL */
|
|
0x25 0x0000 /* LED0_BLINK_CTRL */
|
|
0x26 0xc007 /* LED1_ON_CTRL */
|
|
0x27 0x003f /* LED1_BLINK_CTRL */
|
|
>;
|
|
};
|
|
|
|
phy@3 {
|
|
reg = <3>;
|
|
|
|
mediatek,led-config = <
|
|
0x21 0x8009 /* BASIC_CTRL */
|
|
0x22 0x0c00 /* ON_DURATION */
|
|
0x23 0x1400 /* BLINK_DURATION */
|
|
0x24 0x8000 /* LED0_ON_CTRL */
|
|
0x25 0x0000 /* LED0_BLINK_CTRL */
|
|
0x26 0xc007 /* LED1_ON_CTRL */
|
|
0x27 0x003f /* LED1_BLINK_CTRL */
|
|
>;
|
|
};
|
|
|
|
phy@4 {
|
|
reg = <4>;
|
|
|
|
mediatek,led-config = <
|
|
0x21 0x8009 /* BASIC_CTRL */
|
|
0x22 0x0c00 /* ON_DURATION */
|
|
0x23 0x1400 /* BLINK_DURATION */
|
|
0x24 0x8000 /* LED0_ON_CTRL */
|
|
0x25 0x0000 /* LED0_BLINK_CTRL */
|
|
0x26 0xc007 /* LED1_ON_CTRL */
|
|
0x27 0x003f /* LED1_BLINK_CTRL */
|
|
>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&watchdog {
|
|
status = "okay";
|
|
};
|
|
|
|
&wifi {
|
|
status = "okay";
|
|
pinctrl-names = "default", "dbdc";
|
|
pinctrl-0 = <&wf_2g_5g_pins>;
|
|
pinctrl-1 = <&wf_dbdc_pins>;
|
|
};
|
|
|
|
&trng {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ssusb {
|
|
vusb33-supply = <®_3p3v>;
|
|
vbus-supply = <®_5v>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_phy {
|
|
status = "okay";
|
|
};
|