openwrt/package/boot
Alexey Bartenev e573b6b557 ramips: add support for D-Link DIR-806A B1 router
General specification:
SoC Type: MediaTek MT7620A (580MHz)
ROM: 8 MB SPI-NOR (MX25L6406E)
RAM: 64 MB DDR (W9751G6KB-25)
Switch: MediaTek MT7530
Ethernet: 5 ports - 5×100MbE (WAN, LAN1-4)
Wireless: 2.4 GHz (MediaTek RT5390): b/g/n
Wireless: 5 GHz (MediaTek MT7610EN): ac/n
Buttons: 2 button (POWER, WPS/RESET)
Bootloader: U-Boot 1.1.3
Power: 12 VDC, 0.5 A

MACs:
| LAN	| [Factory + 0x04] - 2		|
| WLAN 2.4g	| [Factory + 0x04] - 1		|
| WLAN 5g	| [Factory + 0x8004] - 3	|
| WAN	| [Factory + 0x04] - 2		|

OEM easy installation:

1. Use a PC to browse to http://192.168.0.1.
2. Go to the System section and open the Firmware Update section.
3. Under the Local Update at the right, click on the CHOOSE FILE...
4. When a modal window appears, choose the firmware file and click on
 the Open.
5. Next click on the UPDATE FIRMWARE button and upload the firmware image.
Wait for the router to flash and reboot.

OEM installation using the TFTP method (need level converter):

1. Download the latest firmware image.
2. Set up a Tftp server on a PC (e.g. Tftpd32) and place the firmware
 image to the root directory of the server.
3. Power off the router and use a twisted pair cable to connect the PC
 to any of the router's LAN ports.
4. Configure the network adapter of the PC to use IP address 192.168.0.180
 and subnet mask 255.255.255.0.
5. Connect serial port (57600 8N1) and turn on the router.
6. Then interrupt "U-Boot Boot Menu" by hitting 2 key (select "2: Load
 system code then write to Flash via TFTP.").
7. Press Y key when show "Warning!! Erase Linux in Flash then burn new
 one. Are you sure? (Y/N)"
Input device IP (192.168.0.1) ==:192.168.0.1
Input server IP (192.168.0.180) ==:192.168.0.180
Input Linux Kernel filename () ==:firmware_name
The router should download the firmware via TFTP and complete flashing in
 a few minutes.
After flashing is complete, use the PC to browse to http://192.168.1.1 or
 ssh to proceed with the configuration.

Signed-off-by: Alexey Bartenev <41exey@proton.me>
(cherry picked from commit ce998cb6e1)
2024-07-09 08:54:41 +02:00
..
arm-trusted-firmware-bcm63xx treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
arm-trusted-firmware-mediatek uboot-mediatek: add initial Zyxel EX5601-T0 support 2024-03-12 22:58:06 +01:00
arm-trusted-firmware-mvebu treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
arm-trusted-firmware-rockchip atf-rockchip: update to 2.3 2020-07-28 15:52:44 +02:00
arm-trusted-firmware-sunxi arm-trusted-firmware-sunxi: bump to 2.8 2023-04-01 01:22:19 +03:00
arm-trusted-firmware-tools arm-trusted-firmware-tools: fix build on macOS/Darwin 2023-08-13 16:29:58 +01:00
at91bootstrap treewide: Add extra CPE identifier 2023-09-27 22:37:13 +02:00
fconfig treewide: unify OpenWrt hosted source via @OPENWRT 2021-02-05 12:00:24 -10:00
grub2 grub2: change armvirt reference to armsr 2023-06-13 14:14:31 +02:00
imx-bootlets imx-bootlets: refresh patches 2021-02-24 16:15:02 +01:00
kexec-tools treewide: add support for "gc-sections" in PKG_BUILD_FLAGS 2023-03-21 18:28:22 +01:00
kobs-ng kobs-ng: update dependencies after 'imx6' -> 'imx' rename 2021-11-03 12:45:40 +01:00
mt7623n-preloader mt7623n-preloader: remove mt7622-preloader 2021-02-28 04:12:23 +00:00
opensbi opensbi: add package for RISC-V 2023-06-14 09:22:08 +02:00
tfa-layerscape tfa-layerscape: fix fiptool's build 2023-05-20 23:20:48 +02:00
uboot-armsr uboot-armsr: add support for QEMU armv7/armv8 2023-06-13 14:15:22 +02:00
uboot-at91 treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-bcm4908 treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-envtools ramips: add support for D-Link DIR-806A B1 router 2024-07-09 08:54:41 +02:00
uboot-fritz4040 treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-imx treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-kirkwood treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-lantiq treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-layerscape package: layerscape: change loadaddr address 2023-05-29 14:17:52 +02:00
uboot-mediatek uboot-mediatek: add Netcore N60 support 2024-07-08 12:00:39 +02:00
uboot-mvebu uboot-mvebu: update to version 2023.07.02 2023-07-30 18:06:28 +02:00
uboot-mxs mxs: rework image generation 2023-07-06 17:04:13 +02:00
uboot-omap treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-oxnas treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-rockchip uboot-rockchip: add Orange Pi R1 Plus LTS support 2023-06-09 13:15:19 +02:00
uboot-sifiveu uboot-sifiveu: add bootloader package for SiFive Ux40 boards 2023-06-14 09:22:08 +02:00
uboot-sunxi Revert "uboot-sunxi: add missing type __u64" 2024-04-27 06:53:22 +00:00
uboot-tegra treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-zynq uboot-zynq: build with zynq generic subtarget 2022-12-25 11:55:53 +01:00