Robert Marko b1f21329d4 ipq40xx: add DSA switch driver ... Qualcomm IPQ40xx SoC-s have a variant of QCA8337N switch built-in. It shares most of the stuff with its external counterpart, however it is modified for the SoC. Namely, it doesn't have second CPU port (Port 6), so it has 6 ports instead of 7. It also has no built-in PHY-s but rather requires external PSGMII based companion PHY-s (QCA8072 and QCA8075) for which it first needs to carry out calibration before using them. PSGMII has a SoC built-in PHY that is used to connect to the PHY-s which unfortunately requires some magic values as the datasheet doesnt document the bits that are being set or the register at all. Since its built-in it is MMIO like other peripherals and doesn't have its own MDIO bus but depends on the SoC provided one. CPU connection is at Port 0 and it uses some kind of a internal connection and no traditional RGMII/SGMII. It also doesn't use in-band tagging like other qca8k switches so a shinfo based tagger is used. This is based on the current OpenWrt qca8k version that has been imported from generic target. Signed-off-by: Robert Marko <robert.marko@sartura.hr>		2022-10-02 23:04:38 +02:00
..
qca8k-ipq4019.c	ipq40xx: add DSA switch driver	2022-10-02 23:04:38 +02:00
qca8k-ipq4019.h	ipq40xx: add DSA switch driver	2022-10-02 23:04:38 +02:00