openwrt/target/linux/ramips/dts/mt7620a_planex_cs-qr10.dts
Sungbo Eo 22a21b0c18 ramips: use hex notation for *-mtd-eeprom property
Change "0" to "0x0" for consistency. This is an extension of commit 34abfb6e91
("ramips: convert mediatek,mtd-eeprom from decimal to hex notation").

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2020-05-08 18:34:27 +02:00

156 lines
2.0 KiB
Plaintext

/dts-v1/;
#include "mt7620a.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "planex,cs-qr10", "ralink,mt7620a-soc";
model = "Planex CS-QR10";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
leds {
compatible = "gpio-leds";
led_power: power {
label = "cs-qr10:red:power";
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
s1 {
label = "reset";
gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
s2 {
label = "wps";
gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
};
&gpio0 {
status = "okay";
};
&gpio1 {
status = "okay";
};
&gpio2 {
status = "okay";
};
&gpio3 {
status = "okay";
};
&i2c {
status = "okay";
};
&i2s {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pcm_i2s_pins>;
};
&spi0 {
status = "okay";
m25p80@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
};
&pcm {
status = "okay";
};
&gdma {
status = "okay";
};
&state_default {
gpio {
groups = "spi refclk", "rgmii1";
function = "gpio";
};
wdt {
groups = "wdt";
function = "wdt refclk";
};
};
&ethernet {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
mtd-mac-address = <&factory 0x4>;
mediatek,portmap = "llllw";
};
&gsw {
ralink,port4 = "ephy";
};
&sdhci {
status = "okay";
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};
&wmac {
ralink,mtd-eeprom = <&factory 0x0>;
};