Jakov Petrina b1cfbff0a7 mvebu: uDPU: switch default kernel and U-Boot PHY mode ... Certain SFP modules (most notably Nokia GPON ones) first check connectivity on 1000base-x, and switch to 2500base-x afterwards. This is considered a quirk so the phylink switches the interface to 2500base-x as well. However, after power-cycling the uDPU device, network interface/SFP module will not work correctly until the module is re-seated. This patch resolves this issue by forcing the interface to be brought up in 2500base-x mode by default. Signed-off-by: Jakov Petrina <jakov.petrina@sartura.hr> Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>		2020-05-09 14:34:23 +02:00
..
002-add_powertables.patch
003-add_switch_nodes.patch
004-add_sata_disk_activity_trigger.patch
005-linksys_hardcode_nand_ecc_settings.patch
006-mvebu-Mangle-bootloader-s-kernel-arguments.patch	kernel: bump 4.19 to 4.19.88	2019-12-10 09:50:42 +01:00
100-find_active_root.patch
102-revert_i2c_delay.patch
205-armada-385-rd-mtd-partitions.patch
206-ARM-mvebu-385-ap-Add-partitions.patch
210-clearfog_switch_node.patch
220-disable-untested-dsa-boards.patch
230-armada-xp-linksys-mamba-broken-idle.patch
240-linksys-status-led.patch	mvebu: use generic diag.sh	2020-03-15 01:45:44 +01:00
300-mvneta-tx-queue-workaround.patch	kernel: bump 4.19 to 4.19.115	2020-04-16 13:23:11 +02:00
400-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch
401-pci-mvebu-time-out-reset-on-link-up.patch
412-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch
415-ARM-dts-armada388-clearfog-document-MPP-usage.patch
513-arm64-dts-marvell-armada37xx-Add-emmc-sdio-pinctrl-d.patch
514-arm64-dts-marvell-armada-37xx-Enable-emmc-on-espress.patch
520-arm64-dts-marvell-armada37xx-Add-eth0-alias.patch
521-arm64-dts-armada-3720-espressobin-correct-spi-node.patch
522-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch
523-Revert-PCI-aardvark-Convert-to-use-pci_host_probe.patch
524-PCI-aardvark-set-host-and-device-to-the-same-MAX-payload-size.patch
526-PCI-aardvark-disable-LOS-state-by-default.patch
527-PCI-aardvark-allow-to-specify-link-capability.patch
528-arm64-dts-armada-3720-espressobin-set-max-link-to-ge.patch
531-net-mvneta-Add-support-for-2500Mbps-SGMII.patch	kernel: bump 4.19 to 4.19.115	2020-04-16 13:23:11 +02:00
532-net-mvneta-correct-typo.patch	kernel: bump 4.19 to 4.19.105	2020-02-24 14:19:16 +01:00
533-net-mvneta-Dont-advertise-2.5G-modes.patch	kernel: bump 4.19 to 4.19.115	2020-04-16 13:23:11 +02:00
534-net-mvneta-remove-redundant-check-for.patch	kernel: bump 4.19 to 4.19.115	2020-04-16 13:23:11 +02:00
535-net-marvell-neta-add-comphy-support.patch	kernel: bump 4.19 to 4.19.115	2020-04-16 13:23:11 +02:00
536-net-marvell-neta-disable-comphy-when-setting-mode.patch	kernel: bump 4.19 to 4.19.115	2020-04-16 13:23:11 +02:00
537-net-mvneta-add-2500baset-support.patch	kernel: bump 4.19 to 4.19.115	2020-04-16 13:23:11 +02:00
538-phy-add-QSGMII-and-PCIE-modes.patch	mvebu: backport mvneta and comphy from linux 5.x	2019-10-12 23:43:08 +02:00
539-phy-core-add-PHY_MODE_ETHERNET.patch	mvebu: backport mvneta and comphy from linux 5.x	2019-10-12 23:43:08 +02:00
540-phy-fix-build-breakage-add-PHY_MODE_SATA.patch	mvebu: backport mvneta and comphy from linux 5.x	2019-10-12 23:43:08 +02:00
541-phy-core-rework-phy_set_mode-to-accept-phy-mode-and-.patch	mvebu: backport mvneta and comphy from linux 5.x	2019-10-12 23:43:08 +02:00
542-phy-add-A3700-COMPHY-support.patch	mvebu: backport mvneta and comphy from linux 5.x	2019-10-12 23:43:08 +02:00
543-arm64-dts-marvell-armada-37xx-declare-the-COMPHY.patch	mvebu: backport mvneta and comphy from linux 5.x	2019-10-12 23:43:08 +02:00
544-arm64-dts-uDPU-fix-comphy-definitions.patch	mvebu: add uDPU update patches	2020-01-21 22:32:48 +01:00
545-arm64-dts-uDPU-remove-i2c-fast-mode.patch	mvebu: add uDPU update patches	2020-01-21 22:32:48 +01:00
546-arm64-dts-uDPU-SFP-cages-support-3W-modules.patch	mvebu: add uDPU update patches	2020-01-21 22:32:48 +01:00
550-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch	mvebu: uDPU: switch default kernel and U-Boot PHY mode	2020-05-09 14:34:23 +02:00