openwrt/target/linux/ath79/image/generic-ubnt.mk
Adrian Schmutzler 8e91b18ab7 ath79: redistribute UBNT variables in Ubiquiti image Makefile
The variables UBNT_BOARD and UBNT_VERSION are defined in the parent
Device/ubnt definition and then overwritten for most of the derived
platform definitions (e.g. Device/ubnt-wa).

Since this mixed use of inheritance and overwriting can be misleading,
this moves the variables to the platform-based definitions.

While at it, reorder the definitions to have order consistent, too.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-12 13:18:01 +01:00

267 lines
6.8 KiB
Makefile

DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE UBNT_VERSION UBNT_REVISION
# On M (XW) devices the U-Boot as of version 1.1.4-s1039 doesn't like
# VERSION_DIST being on the place of major(?) version number, so we need to
# use some number.
UBNT_REVISION := $(VERSION_DIST)-$(REVISION)
# mkubntimage is using the kernel image direct
# routerboard creates partitions out of the ubnt header
define Build/mkubntimage
-$(STAGING_DIR_HOST)/bin/mkfwimage \
-B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
-k $(IMAGE_KERNEL) \
-r $@ \
-o $@
endef
# all UBNT XM/WA devices expect the kernel image to have 1024k while flash, when
# booting the image, the size doesn't matter.
define Build/mkubntimage-split
-[ -f $@ ] && ( \
dd if=$@ of=$@.old1 bs=1024k count=1; \
dd if=$@ of=$@.old2 bs=1024k skip=1; \
$(STAGING_DIR_HOST)/bin/mkfwimage \
-B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v$(UBNT_VERSION)-$(UBNT_REVISION) \
-k $@.old1 \
-r $@.old2 \
-o $@; \
rm $@.old1 $@.old2 )
endef
# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
# UBNT_TYPE e.g. one of (BZ, XM, XW)
# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x)
# UBNT_VERSION e.g. one of (6.0.0, 8.5.0)
define Device/ubnt
DEVICE_VENDOR := Ubiquiti
DEVICE_PACKAGES := kmod-usb2
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | mkubntimage-split
endef
define Device/ubnt-bz
$(Device/ubnt)
ATH_SOC := ar7241
IMAGE_SIZE := 7448k
UBNT_BOARD := XM
UBNT_CHIP := ar7240
UBNT_TYPE := BZ
UBNT_VERSION := 6.0.0
endef
define Device/ubnt-wa
$(Device/ubnt)
ATH_SOC := ar9342
IMAGE_SIZE := 15744k
UBNT_BOARD := WA
UBNT_CHIP := ar934x
UBNT_TYPE := WA
UBNT_VERSION := 8.5.0
endef
define Device/ubnt-xm
$(Device/ubnt)
ATH_SOC := ar7241
DEVICE_VARIANT := XM
DEVICE_PACKAGES += kmod-usb-ohci
IMAGE_SIZE := 7448k
UBNT_BOARD := XM
UBNT_CHIP := ar7240
UBNT_TYPE := XM
UBNT_VERSION := 6.0.0
KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | uImage lzma
endef
define Device/ubnt-xw
$(Device/ubnt)
ATH_SOC := ar9342
DEVICE_VARIANT := XW
IMAGE_SIZE := 7552k
UBNT_BOARD := XM
UBNT_CHIP := ar934x
UBNT_REVISION := 42.$(UBNT_REVISION)
UBNT_TYPE := XW
UBNT_VERSION := 6.0.4
endef
define Device/ubnt_acb-isp
$(Device/ubnt)
ATH_SOC := qca9533
DEVICE_MODEL := airCube ISP
IMAGE_SIZE := 15744k
UBNT_BOARD := ACB-ISP
UBNT_CHIP := qca9533
UBNT_TYPE := ACB
UBNT_VERSION := 6.0.0
IMAGES := sysupgrade.bin
endef
TARGET_DEVICES += ubnt_acb-isp
define Device/ubnt_airrouter
$(Device/ubnt-xm)
DEVICE_MODEL := AirRouter
SUPPORTED_DEVICES += airrouter
endef
TARGET_DEVICES += ubnt_airrouter
define Device/ubnt_bullet-m
$(Device/ubnt-xm)
DEVICE_MODEL := Bullet-M
DEVICE_PACKAGES += rssileds
SUPPORTED_DEVICES += bullet-m
endef
TARGET_DEVICES += ubnt_bullet-m
define Device/ubnt_bullet-m-xw
$(Device/ubnt-xw)
DEVICE_MODEL := Bullet-M
DEVICE_PACKAGES += rssileds
SUPPORTED_DEVICES += bullet-m-xw
endef
TARGET_DEVICES += ubnt_bullet-m-xw
define Device/ubnt_lap-120
$(Device/ubnt-wa)
DEVICE_MODEL := LiteAP ac
DEVICE_VARIANT := LAP-120
DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
endef
TARGET_DEVICES += ubnt_lap-120
define Device/ubnt_litebeam-ac-gen2
$(Device/ubnt-wa)
DEVICE_MODEL := LiteBeam AC
DEVICE_VARIANT := Gen2
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
endef
TARGET_DEVICES += ubnt_litebeam-ac-gen2
define Device/ubnt_nanobeam-ac
$(Device/ubnt-wa)
DEVICE_MODEL := NanoBeam AC
DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct rssileds
endef
TARGET_DEVICES += ubnt_nanobeam-ac
define Device/ubnt_nanostation-ac
$(Device/ubnt-wa)
DEVICE_MODEL := Nanostation AC
DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct rssileds
endef
TARGET_DEVICES += ubnt_nanostation-ac
define Device/ubnt_nanostation-ac-loco
$(Device/ubnt-wa)
DEVICE_MODEL := Nanostation AC loco
DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
endef
TARGET_DEVICES += ubnt_nanostation-ac-loco
define Device/ubnt_nanostation-m
$(Device/ubnt-xm)
DEVICE_MODEL := Nanostation M
DEVICE_PACKAGES += rssileds
SUPPORTED_DEVICES += nanostation-m
endef
TARGET_DEVICES += ubnt_nanostation-m
define Device/ubnt_nanostation-m-xw
$(Device/ubnt-xw)
DEVICE_MODEL := Nanostation M
DEVICE_PACKAGES += rssileds
SUPPORTED_DEVICES += nanostation-m-xw
endef
TARGET_DEVICES += ubnt_nanostation-m-xw
define Device/ubnt_rocket-m
$(Device/ubnt-xm)
DEVICE_MODEL := Rocket-M
DEVICE_PACKAGES += rssileds
SUPPORTED_DEVICES += rocket-m
endef
TARGET_DEVICES += ubnt_rocket-m
define Device/ubnt_routerstation_common
DEVICE_PACKAGES := -kmod-ath9k -wpad-mini -uboot-envtools kmod-usb-ohci kmod-usb2 fconfig
DEVICE_VENDOR := Ubiquiti
ATH_SOC := ar7161
IMAGE_SIZE := 16128k
IMAGES := factory.bin
IMAGE/factory.bin := append-rootfs | pad-rootfs | mkubntimage | check-size $$$$(IMAGE_SIZE)
KERNEL := kernel-bin | append-dtb | lzma | pad-to $$(BLOCKSIZE)
KERNEL_INITRAMFS := kernel-bin | append-dtb
endef
define Device/ubnt_routerstation
$(Device/ubnt_routerstation_common)
DEVICE_MODEL := RouterStation
UBNT_BOARD := RS
UBNT_TYPE := RSx
UBNT_CHIP := ar7100
DEVICE_PACKAGES += -swconfig
SUPPORTED_DEVICES += routerstation
endef
TARGET_DEVICES += ubnt_routerstation
define Device/ubnt_routerstation-pro
$(Device/ubnt_routerstation_common)
DEVICE_MODEL := RouterStation Pro
UBNT_BOARD := RSPRO
UBNT_TYPE := RSPRO
UBNT_CHIP := ar7100pro
SUPPORTED_DEVICES += routerstation-pro
endef
TARGET_DEVICES += ubnt_routerstation-pro
define Device/ubnt_unifi
$(Device/ubnt-bz)
DEVICE_MODEL := UniFi
SUPPORTED_DEVICES += unifi
endef
TARGET_DEVICES += ubnt_unifi
define Device/ubnt_unifiac
DEVICE_VENDOR := Ubiquiti
ATH_SOC := qca9563
IMAGE_SIZE := 7744k
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
endef
define Device/ubnt_unifiac-lite
$(Device/ubnt_unifiac)
DEVICE_MODEL := UniFi AC-Lite
SUPPORTED_DEVICES += unifiac-lite
endef
TARGET_DEVICES += ubnt_unifiac-lite
define Device/ubnt_unifiac-lr
$(Device/ubnt_unifiac)
DEVICE_MODEL := UniFi AC-LR
SUPPORTED_DEVICES += unifiac-lite ubnt,unifiac-lite
endef
TARGET_DEVICES += ubnt_unifiac-lr
define Device/ubnt_unifiac-mesh
$(Device/ubnt_unifiac)
DEVICE_MODEL := UniFi AC-Mesh
SUPPORTED_DEVICES += ubnt-unifiac-mesh
endef
TARGET_DEVICES += ubnt_unifiac-mesh
define Device/ubnt_unifiac-mesh-pro
$(Device/ubnt_unifiac)
DEVICE_MODEL := UniFi AC-Mesh Pro
SUPPORTED_DEVICES += ubnt-unifiac-mesh-pro
endef
TARGET_DEVICES += ubnt_unifiac-mesh-pro
define Device/ubnt_unifiac-pro
$(Device/ubnt_unifiac)
DEVICE_MODEL := UniFi AC-Pro
DEVICE_PACKAGES += kmod-usb2
SUPPORTED_DEVICES += ubnt-unifiac-pro
endef
TARGET_DEVICES += ubnt_unifiac-pro