Jan Alexander 4e46beb313 ipq806x: add support for Ubiquiti UniFi AC HD ... Hardware -------- SoC: Qualcomm IPQ8064 RAM: 512MB DDR3 Flash: 256MB NAND (Micron MT29F2G08ABBEAH4) 32MB SPI-NOR (Macronix MX25U25635F) WLAN: Qualcomm Atheros QCA9994 4T4R b/g/n Qualcomm Atheros QCA9994 4T4R a/n/ac ETH: eth0 - SECONDARY (Atheros AR8033) eth1 - MAIN (Atheros AR8033) USB: USB-C LED: Dome (white / blue) BTN: Reset Installation ------------ Copy the OpenWrt sysupgrade image to the /tmp directory of the device using scp. Default IP address is 192.168.1.20 and default username and password are "ubnt". SSH to the device and write the bootselect flag to ensure it is booting from the mtd partition the OpenWrt image will be written to. Verify the output device below matches mtd partition "bootselect" using /proc/mtd. > dd if=/dev/zero bs=1 count=1 seek=7 conv=notrunc of=/dev/mtd11 Write the OpenWrt sysupgrade image to the mtd partition labeled "kernel0". Also verify the used partition device using /proc/mtd. > dd if=/tmp/sysupgrade.bin of=/dev/mtdblock12 Reboot the device. Back to stock ------------- Use the TFTP recovery procedure with the Ubiquiti firmware image to restore the vendor firmware. Signed-off-by: Jan Alexander <jan@nalx.net>		2021-01-14 01:03:54 +01:00
..
080-v5.7-ARM-dts-qcom-add-gpio-ranges-property.patch	ipq806x: use qcom-ipq8064.dtsi from upstream	2020-08-05 23:08:03 +02:00
081-v5.8-ARM-dts-qcom-add-scm-definition-to-ipq806x.patch	ipq806x: use qcom-ipq8064.dtsi from upstream	2020-08-05 23:08:03 +02:00
082-ipq8064-dtsi-tweaks.patch	ipq806x: use qcom-ipq8064.dtsi from upstream	2020-08-05 23:08:03 +02:00
083-ipq8064-dtsi-additions.patch	ipq806x: replace nvmem qcom patch with upstream version	2020-08-13 02:12:12 +02:00
084-ipq8064-v1.0-dtsi-cleanup.patch	ipq806x: use qcom-ipq8064-v1.0.dtsi from upstream	2020-08-05 23:08:03 +02:00
085-ipq8064-v1.0-dtsi-additions.patch	ipq806x: replace pci patchset with upstream version	2020-08-24 14:09:11 +02:00
086-v5.8-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch	ipq806x: replace patches with upstream version	2020-08-08 18:07:17 +02:00
087-v5.8-ipq8064-pinctrl-Fixed-missing-RGMII-pincontrol-defin.patch	ipq806x: replace patches with upstream version	2020-08-08 18:07:17 +02:00
088-v5.8-watchdog-qcom-wdt-disable-pretimeout-on-timer-platfo.patch	ipq806x: replace patches with upstream version	2020-08-08 18:07:17 +02:00
089-v5.8-ipq806x-gcc-Added-the-enable-regs-and-mask-for-PRNG.patch	ipq806x: replace patches with upstream version	2020-08-08 18:07:17 +02:00
090-v5.8-clk-clk-rpm-fixes.patch	ipq806x: replace patches with upstream version	2020-08-08 18:07:17 +02:00
091-v5.8-regulator-add-smb208-support.patch	ipq806x: replace patches with upstream version	2020-08-08 18:07:17 +02:00
092-1-v5.7-qcom-cpufreq-nvmem-Add-support-for-krait-based-socs.patch	kernel: bump 5.4 to 5.4.86	2021-01-01 17:07:28 +01:00
092-2-v5.7-cpufreq-qcom-fix-wrong-compatible-binding.patch	ipq806x: replace nvmem qcom patch with upstream version	2020-08-13 02:12:12 +02:00
093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch	kernel: bump 5.4 to 5.4.79	2020-11-24 15:36:59 +01:00
093-7-v5.8-ipq806x-PCI-qcom-Add-ipq8064-rev2-variant.patch	kernel: bump 5.4 to 5.4.79	2020-11-24 15:36:59 +01:00
093-8-v5.8-ipq806x-PCI-qcom-Support-pci-speed-set-for-ipq806x.patch	kernel: bump 5.4 to 5.4.79	2020-11-24 15:36:59 +01:00
094-v5.7-ipq806x-net-mdio-add-ipq8064-mdio-driver.patch	kernel: bump 5.4 to 5.4.79	2020-11-24 15:36:59 +01:00
095-1-v5.9-phy-qualcomm-add-qcom-ipq806x-dwc-usb-phy-driver.patch	ipq806x: replace phy dwc3 patch with upstream version	2020-08-13 02:12:12 +02:00
095-2-v5.9-phy-qualcomm-fix-setting-of-tx_deamp_3_5db-when-device-property-read-fails.patch	ipq806x: replace phy dwc3 patch with upstream version	2020-08-13 02:12:12 +02:00
850-soc-add-qualcomm-syscon.patch
851-add-gsbi1-dts.patch	kernel: bump 5.4 to 5.4.66	2020-09-19 12:41:29 +02:00
900-arm-add-cmdline-override.patch	ipq806x: fix 900-arm-add-cmdline-override.patch	2021-01-01 22:10:20 +01:00
997-device_tree_cmdline.patch	ipq806x: add support for ASRock G10	2020-12-22 19:11:50 +01:00
0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch
0002-dmaengine-Add-ADM-driver.patch
0030-clk-Disable-i2c-device-on-gsbi4.patch
0031-mtd-add-SMEM-parser-for-QCOM-platforms.patch	kernel: properly insert local mtd partition parsers	2020-05-25 21:11:47 +02:00
0033-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch
0049-PM-OPP-Support-adjusting-OPP-voltages-at-runtime.patch	kernel: bump 5.4 to 5.4.79	2020-11-24 15:36:59 +01:00
0051-PM-OPP-Add-a-helper-to-get-an-opp-regulator-for-devi.patch
0052-PM-OPP-Update-the-voltage-tolerance-when-adjusting-t.patch	kernel: bump 5.4 to 5.4.79	2020-11-24 15:36:59 +01:00
0054-cpufreq-dt-Handle-OPP-voltage-adjust-events.patch
0055-cpufreq-dt-Add-L2-frequency-scaling-support.patch	ipq806x: rework L2 cache patch	2020-03-03 23:38:23 +01:00
0056-cpufreq-dt-Add-missing-rcu-locks.patch
0057-add-fab-scaling-support-with-cpufreq.patch
0059-ARM-cpuidle-Add-cpuidle-support-for-QCOM-cpus.patch
0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch
0061-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch
0063-1-ipq806x-tsens-driver.patch	ipq806x: fix tsens driver	2020-03-03 23:38:23 +01:00
0063-2-tsens-support-configurable-interrupts.patch	ipq806x: fix tsens driver	2020-03-03 23:38:23 +01:00
0063-3-tsens-fix-kernel-5_4.patch	ipq806x: fix tsens driver	2020-03-03 23:38:23 +01:00
0063-4-ip806x-tsense-rework-driver.patch	ipq806x: fix tsens driver	2020-03-03 23:38:23 +01:00
0065-arm-override-compiler-flags.patch
0067-generic-Mangle-bootloader-s-kernel-arguments.patch	kernel: bump 5.4 to 5.4.75	2020-11-10 13:11:32 +01:00
0069-arm-boot-add-dts-files.patch	ipq806x: add support for Ubiquiti UniFi AC HD	2021-01-14 01:03:54 +01:00
0072-add-ipq806x-with-no-clocks.patch	kernel: Update kernel 5.4 to version 5.4.50	2020-07-04 21:12:42 +02:00