openwrt/target/linux/ramips/dts/DIR-810L.dts
2014-09-19 11:07:08 +00:00

133 lines
2.1 KiB
Plaintext

/dts-v1/;
/include/ "mt7620a.dtsi"
/ {
compatible = "dlink,dir-810l", "ralink,mt7620a-soc";
model = "D-Link DIR-810L";
palmbus@10000000 {
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mx25l6405d";
reg = <0 0>;
linux,modalias = "m25p80";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
factory5g: partition@50000 {
label = "factory5g";
reg = <0x50000 0x10000>;
read-only;
};
partition@60000 {
label = "Wolf_Config";
reg = <0x60000 0x10000>;
read-only;
};
partition@70000 {
label = "MyDlink";
reg = <0x70000 0x80000>;
read-only;
};
partition@e0000 {
label = "Jffs2";
reg = <0xe0000 0x80000>;
read-only;
};
partition@170000 {
label = "firmware";
reg = <0x170000 0x690000>;
};
};
};
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "mdio", "rgmii1", "i2c", "wled", "uartf";
ralink,function = "gpio";
};
};
};
ethernet@10100000 {
mtd-mac-address = <&factory 0x28>;
ralink,port-map = "llllw";
};
gsw@10110000 {
ralink,port4 = "ephy";
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
};
pcie@10140000 {
status = "okay";
};
wmac@10180000 {
ralink,mtd-eeprom = <&factory 0>;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 1 1>;
linux,code = <0x100>;
};
wps {
label = "wps";
gpios = <&gpio0 2 1>;
linux,code = <0x100>;
};
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "dlink:power:green";
gpios = <&gpio0 9 0>;
};
internet {
label = "dlink:internet:orange";
gpios = <&gpio0 12 0>;
};
status {
label = "dlink:power:orange";
gpios = <&gpio0 13 0>;
};
};
};