mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 00:11:13 +00:00
a3dd6c939d
Qxwlan E750G v8 is based on Qualcomm QCA9344.
Specification:
- 560/450/225 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 8/16 MB of FLASH (SPI NOR)
- 2T2R 2.4G GHz (AR9344)
- 2x 10/100 Mbps Ethernet (PoE support)
- 2x 10/100/1000 Mbps Ethernet
- 7x LED (6 driven by GPIO)
- 1x button (reset)
- 1x DC jack for main power input (9-48 V)
- UART (J23) and LEDs (J2) headers on PCB
Flash instruction (using U-Boot CLI and tftp server):
- Configure PC with static IP 192.168.1.10 and tftp server.
- Rename "sysupgrade" filename to "firmware.bin" and place it in tftp
server directory.
- Connect PC with one of RJ45 ports, power up the board and press
"enter" key to access U-Boot CLI.
- Use the following command to update the device to OpenWrt: "run lfw".
Flash instruction (using U-Boot web-based recovery):
- Configure PC with static IP 192.168.1.xxx(2-254)/24.
- Connect PC with one of RJ45 ports, press the reset button, power up
the board and keep button pressed for around 6-7 seconds, until LEDs
start flashing.
- Open your browser and enter 192.168.1.1, select "sysupgrade" image
and click the upgrade button.
Signed-off-by: 张鹏 <sd20@qxwlan.com>
(cherry picked from commit 53a4502013)
152 lines
3.8 KiB
C
152 lines
3.8 KiB
C
/*
|
|
* Qxwlan E750G v8 board support
|
|
*
|
|
* Copyright (C) 2017 Peng Zhang <sd20@qxwlan.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/ath9k_platform.h>
|
|
#include <linux/ar8216_platform.h>
|
|
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
|
|
#include "common.h"
|
|
#include "pci.h"
|
|
#include "dev-ap9x-pci.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-usb.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "dev-spi.h"
|
|
#include "dev-wmac.h"
|
|
#include "machtypes.h"
|
|
|
|
#define E750G_V8_GPIO_LED_SYS 14
|
|
#define E750G_V8_GPIO_LED_DS20 15
|
|
#define E750G_V8_GPIO_LED_DS10 20
|
|
#define E750G_V8_GPIO_LED_WLAN 21
|
|
|
|
#define E750G_V8_GPIO_BTN_RESET 12
|
|
|
|
#define E750G_V8_KEYS_POLL_INTERVAL 20 /* msecs */
|
|
#define E750G_V8_KEYS_DEBOUNCE_INTERVAL (3 * E750G_V8_KEYS_POLL_INTERVAL)
|
|
|
|
static struct gpio_led e750g_v8_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "e750g-v8:green:system",
|
|
.gpio = E750G_V8_GPIO_LED_SYS,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "e750g-v8:green:ds10",
|
|
.gpio = E750G_V8_GPIO_LED_DS10,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "e750g-v8:green:ds20",
|
|
.gpio = E750G_V8_GPIO_LED_DS20,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "e750g-v8:green:wlan",
|
|
.gpio = E750G_V8_GPIO_LED_WLAN,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_button e750g_v8_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "reset",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = E750G_V8_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = E750G_V8_GPIO_BTN_RESET,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static const struct ar8327_led_info e750g_v8_leds_qca8334[] = {
|
|
AR8327_LED_INFO(PHY1_0, HW, "e750g-v8:green:lan"),
|
|
AR8327_LED_INFO(PHY2_0, HW, "e750g-v8:green:wan"),
|
|
};
|
|
|
|
static struct ar8327_pad_cfg e750g_v8_ar8327_pad0_cfg = {
|
|
.mode = AR8327_PAD_MAC_RGMII,
|
|
.txclk_delay_en = true,
|
|
.rxclk_delay_en = true,
|
|
.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
|
|
.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
|
|
.mac06_exchange_dis = true,
|
|
};
|
|
|
|
static struct ar8327_led_cfg e750g_v8_ar8327_led_cfg = {
|
|
.led_ctrl0 = 0x00000000,
|
|
.led_ctrl1 = 0xc737c737,
|
|
.led_ctrl2 = 0x00000000,
|
|
.led_ctrl3 = 0x00c30c00,
|
|
.open_drain = true,
|
|
};
|
|
|
|
static struct ar8327_platform_data e750g_v8_ar8327_data = {
|
|
.pad0_cfg = &e750g_v8_ar8327_pad0_cfg,
|
|
.port0_cfg = {
|
|
.force_link = 1,
|
|
.speed = AR8327_PORT_SPEED_1000,
|
|
.duplex = 1,
|
|
.txpause = 1,
|
|
.rxpause = 1,
|
|
},
|
|
.led_cfg = &e750g_v8_ar8327_led_cfg,
|
|
.leds = e750g_v8_leds_qca8334,
|
|
.num_leds = ARRAY_SIZE(e750g_v8_leds_qca8334),
|
|
};
|
|
|
|
static struct mdio_board_info e750g_v8_mdio0_info[] = {
|
|
{
|
|
.bus_id = "ag71xx-mdio.0",
|
|
.phy_addr = 0,
|
|
.platform_data = &e750g_v8_ar8327_data,
|
|
},
|
|
};
|
|
|
|
static void __init e750g_v8_setup(void)
|
|
{
|
|
u8 *mac = (u8 *) KSEG1ADDR(0x1f050400);
|
|
u8 *art = (u8 *) KSEG1ADDR(0x1f061000);
|
|
|
|
ath79_register_m25p80(NULL);
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(e750g_v8_leds_gpio),
|
|
e750g_v8_leds_gpio);
|
|
ath79_register_gpio_keys_polled(-1, E750G_V8_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(e750g_v8_gpio_keys),
|
|
e750g_v8_gpio_keys);
|
|
|
|
mdiobus_register_board_info(e750g_v8_mdio0_info,
|
|
ARRAY_SIZE(e750g_v8_mdio0_info));
|
|
|
|
ath79_register_mdio(0, 0x0);
|
|
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
|
|
AR934X_ETH_CFG_SW_ONLY_MODE);
|
|
|
|
/* GMAC0 is connected to an AR8327 switch */
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
|
ath79_eth0_data.phy_mask = BIT(0);
|
|
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
|
ath79_eth0_pll_data.pll_1000 = 0x06000000;
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
|
|
ath79_register_eth(0);
|
|
|
|
ath79_register_pci();
|
|
ath79_register_usb();
|
|
ath79_register_wmac(art, NULL);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_E750G_V8, "E750G-V8", "Qxwlan E750G v8",
|
|
e750g_v8_setup);
|