mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 14:13:16 +00:00
f07e572f64
bcm2708: boot tested on RPi B+ v1.2 bcm2709: boot tested on RPi 3B v1.2 and RPi 4B v1.1 4G bcm2710: boot tested on RPi 3B v1.2 bcm2711: boot tested on RPi 4B v1.1 4G Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
71 lines
2.4 KiB
Diff
71 lines
2.4 KiB
Diff
From 2be1e1c949138b40aac6be1e6f761c69e98dcf66 Mon Sep 17 00:00:00 2001
|
|
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
Date: Thu, 3 Sep 2020 14:59:40 +0100
|
|
Subject: [PATCH] overlays: Update i2c0 overlay to disable the
|
|
i2c0mux.
|
|
|
|
The i2c0 overlay was assigning pinctrl settings to node i2c0,
|
|
which is now the port@0 output of the mux. That leaves a high
|
|
chance of it colliding with the port@1 output and not doing
|
|
what was intended.
|
|
|
|
Set the i2c0 overlay to disable i2c0mux, set the pin-ctrl on
|
|
the root i2c controller, and redirect the alias, so overall it
|
|
behaves exactly as before.
|
|
Combining with dtparam=i2c_vc=on is going to cause conflicts,
|
|
so this is noted in the README.
|
|
|
|
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
---
|
|
arch/arm/boot/dts/overlays/README | 7 +++++++
|
|
arch/arm/boot/dts/overlays/i2c0-overlay.dts | 15 ++++++++++++++-
|
|
2 files changed, 21 insertions(+), 1 deletion(-)
|
|
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -1354,6 +1354,13 @@ Name: i2c0
|
|
Info: Change i2c0 pin usage. Not all pin combinations are usable on all
|
|
platforms - platforms other then Compute Modules can only use this
|
|
to disable transaction combining.
|
|
+ Do NOT use in conjunction with dtparam=i2c_vc=on. From the 5.4 kernel
|
|
+ onwards the base DT includes the use of i2c_mux_pinctrl to expose two
|
|
+ muxings of BSC0 - GPIOs 0&1, and whichever combination is used for the
|
|
+ camera and display connectors. This overlay disables that mux and
|
|
+ configures /dev/i2c0 to point at whichever set of pins is requested.
|
|
+ dtparam=i2c_vc=on will try and enable the mux, so combining the two
|
|
+ will cause conflicts.
|
|
Load: dtoverlay=i2c0,<param>=<val>
|
|
Params: pins_0_1 Use pins 0 and 1 (default)
|
|
pins_28_29 Use pins 28 and 29
|
|
--- a/arch/arm/boot/dts/overlays/i2c0-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/i2c0-overlay.dts
|
|
@@ -5,7 +5,7 @@
|
|
compatible = "brcm,bcm2835";
|
|
|
|
fragment@0 {
|
|
- target = <&i2c0>;
|
|
+ target = <&i2c0if>;
|
|
__overlay__ {
|
|
status = "okay";
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
@@ -51,6 +51,19 @@
|
|
};
|
|
};
|
|
|
|
+ fragment@6 {
|
|
+ target = <&i2c0mux>;
|
|
+ __overlay__ {
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@7 {
|
|
+ target-path = "/aliases";
|
|
+ __overlay__ {
|
|
+ i2c0 = "/soc/i2c@7e205000";
|
|
+ };
|
|
+ };
|
|
__overrides__ {
|
|
pins_0_1 = <0>,"+1-2-3-4";
|
|
pins_28_29 = <0>,"-1+2-3-4";
|