mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 02:29:01 +00:00
f07e572f64
bcm2708: boot tested on RPi B+ v1.2 bcm2709: boot tested on RPi 3B v1.2 and RPi 4B v1.1 4G bcm2710: boot tested on RPi 3B v1.2 bcm2711: boot tested on RPi 4B v1.1 4G Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
157 lines
3.7 KiB
Diff
157 lines
3.7 KiB
Diff
From 738defbb964c5d2a34b08c24ac0e7fd4afb16173 Mon Sep 17 00:00:00 2001
|
|
From: Naushir Patuck <naush@raspberrypi.com>
|
|
Date: Thu, 7 May 2020 15:50:04 +0100
|
|
Subject: [PATCH] dtoverlays: Add IMX477 sensor overlay
|
|
|
|
Add an overlay for the Sony IMX477 CMOS sensor device.
|
|
Also update overlay README and Makefile.
|
|
|
|
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
|
|
---
|
|
arch/arm/boot/dts/overlays/Makefile | 1 +
|
|
arch/arm/boot/dts/overlays/README | 8 ++
|
|
arch/arm/boot/dts/overlays/imx477-overlay.dts | 110 ++++++++++++++++++
|
|
3 files changed, 119 insertions(+)
|
|
create mode 100644 arch/arm/boot/dts/overlays/imx477-overlay.dts
|
|
|
|
--- a/arch/arm/boot/dts/overlays/Makefile
|
|
+++ b/arch/arm/boot/dts/overlays/Makefile
|
|
@@ -85,6 +85,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
|
|
i2s-gpio28-31.dtbo \
|
|
ilitek251x.dtbo \
|
|
imx219.dtbo \
|
|
+ imx477.dtbo \
|
|
iqaudio-codec.dtbo \
|
|
iqaudio-dac.dtbo \
|
|
iqaudio-dacplus.dtbo \
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -1390,6 +1390,14 @@ Load: dtoverlay=imx219
|
|
Params: <None>
|
|
|
|
|
|
+Name: imx477
|
|
+Info: Sony IMX477 camera module.
|
|
+ Uses Unicam 1, which is the standard camera connector on most Pi
|
|
+ variants.
|
|
+Load: dtoverlay=imx477
|
|
+Params: <None>
|
|
+
|
|
+
|
|
Name: iqaudio-codec
|
|
Info: Configures the IQaudio Codec audio card
|
|
Load: dtoverlay=iqaudio-codec
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/overlays/imx477-overlay.dts
|
|
@@ -0,0 +1,110 @@
|
|
+// SPDX-License-Identifier: GPL-2.0-only
|
|
+// Definitions for IMX477 camera module on VC I2C bus
|
|
+/dts-v1/;
|
|
+/plugin/;
|
|
+
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+
|
|
+/{
|
|
+ compatible = "brcm,bcm2835";
|
|
+
|
|
+ fragment@0 {
|
|
+ target = <&i2c_csi_dsi>;
|
|
+ __overlay__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ status = "okay";
|
|
+
|
|
+ imx477: imx477@1a {
|
|
+ compatible = "sony,imx477";
|
|
+ reg = <0x1a>;
|
|
+ status = "okay";
|
|
+
|
|
+ clocks = <&imx477_clk>;
|
|
+ clock-names = "xclk";
|
|
+
|
|
+ VANA-supply = <&imx477_vana>; /* 2.8v */
|
|
+ VDIG-supply = <&imx477_vdig>; /* 1.05v */
|
|
+ VDDL-supply = <&imx477_vddl>; /* 1.8v */
|
|
+
|
|
+ port {
|
|
+ imx477_0: endpoint {
|
|
+ remote-endpoint = <&csi1_ep>;
|
|
+ clock-lanes = <0>;
|
|
+ data-lanes = <1 2>;
|
|
+ clock-noncontinuous;
|
|
+ link-frequencies =
|
|
+ /bits/ 64 <450000000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@1 {
|
|
+ target = <&csi1>;
|
|
+ __overlay__ {
|
|
+ status = "okay";
|
|
+
|
|
+ port {
|
|
+ csi1_ep: endpoint {
|
|
+ remote-endpoint = <&imx477_0>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@2 {
|
|
+ target = <&i2c0if>;
|
|
+ __overlay__ {
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@3 {
|
|
+ target-path="/";
|
|
+ __overlay__ {
|
|
+ imx477_vana: fixedregulator@0 {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "imx477_vana";
|
|
+ regulator-min-microvolt = <2800000>;
|
|
+ regulator-max-microvolt = <2800000>;
|
|
+ gpio = <&gpio 41 GPIO_ACTIVE_HIGH>;
|
|
+ enable-active-high;
|
|
+ startup-delay-us = <300000>;
|
|
+ };
|
|
+ imx477_vdig: fixedregulator@1 {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "imx477_vdig";
|
|
+ regulator-min-microvolt = <1050000>;
|
|
+ regulator-max-microvolt = <1050000>;
|
|
+ };
|
|
+ imx477_vddl: fixedregulator@2 {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "imx477_vddl";
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ };
|
|
+ imx477_clk: camera-clk {
|
|
+ compatible = "fixed-clock";
|
|
+ #clock-cells = <0>;
|
|
+ clock-frequency = <24000000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@4 {
|
|
+ target = <&i2c0mux>;
|
|
+ __overlay__ {
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@5 {
|
|
+ target-path="/__overrides__";
|
|
+ __overlay__ {
|
|
+ cam0-pwdn-ctrl = <&imx477_vana>,"gpio:0";
|
|
+ cam0-pwdn = <&imx477_vana>,"gpio:4";
|
|
+ };
|
|
+ };
|
|
+};
|