openwrt/target/linux/generic/backport-5.4/845-v6.0-0002-leds-bcm63138-add-support-for-BCM63138-controller.patch
Rafał Miłecki 8d24ea3f31 kernel: rename 5.20 patches to 6.0
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 372ee1919d)
2022-09-02 14:31:59 +02:00

372 lines
10 KiB
Diff

From a0ba692072d89075d0a75c7ad9df31f2c1ee9a1c Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Mon, 27 Dec 2021 15:59:05 +0100
Subject: [PATCH] leds: bcm63138: add support for BCM63138 controller
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
It's a new controller first introduced in BCM63138 SoC. Later it was
also used in BCM4908, some BCM68xx and some BCM63xxx SoCs.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
---
drivers/leds/blink/Kconfig | 12 ++
drivers/leds/blink/Makefile | 1 +
drivers/leds/blink/leds-bcm63138.c | 308 +++++++++++++++++++++++++++++
3 files changed, 321 insertions(+)
create mode 100644 drivers/leds/blink/leds-bcm63138.c
--- /dev/null
+++ b/drivers/leds/blink/Kconfig
@@ -0,0 +1,11 @@
+config LEDS_BCM63138
+ tristate "LED Support for Broadcom BCM63138 SoC"
+ depends on LEDS_CLASS
+ depends on ARCH_BCM4908 || ARCH_BCM_5301X || BCM63XX || COMPILE_TEST
+ depends on HAS_IOMEM
+ depends on OF
+ default ARCH_BCM4908
+ help
+ This option enables support for LED controller that is part of
+ BCM63138 SoC. The same hardware block is known to be also used
+ in BCM4908, BCM6848, BCM6858, BCM63148, BCM63381 and BCM68360.
--- /dev/null
+++ b/drivers/leds/blink/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_LEDS_BCM63138) += leds-bcm63138.o
--- /dev/null
+++ b/drivers/leds/blink/leds-bcm63138.c
@@ -0,0 +1,308 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl>
+ */
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#define BCM63138_MAX_LEDS 32
+#define BCM63138_MAX_BRIGHTNESS 9
+
+#define BCM63138_LED_BITS 4 /* how many bits control a single LED */
+#define BCM63138_LED_MASK ((1 << BCM63138_LED_BITS) - 1) /* 0xf */
+#define BCM63138_LEDS_PER_REG (32 / BCM63138_LED_BITS) /* 8 */
+
+#define BCM63138_GLB_CTRL 0x00
+#define BCM63138_GLB_CTRL_SERIAL_LED_DATA_PPOL 0x00000002
+#define BCM63138_GLB_CTRL_SERIAL_LED_EN_POL 0x00000008
+#define BCM63138_MASK 0x04
+#define BCM63138_HW_LED_EN 0x08
+#define BCM63138_SERIAL_LED_SHIFT_SEL 0x0c
+#define BCM63138_FLASH_RATE_CTRL1 0x10
+#define BCM63138_FLASH_RATE_CTRL2 0x14
+#define BCM63138_FLASH_RATE_CTRL3 0x18
+#define BCM63138_FLASH_RATE_CTRL4 0x1c
+#define BCM63138_BRIGHT_CTRL1 0x20
+#define BCM63138_BRIGHT_CTRL2 0x24
+#define BCM63138_BRIGHT_CTRL3 0x28
+#define BCM63138_BRIGHT_CTRL4 0x2c
+#define BCM63138_POWER_LED_CFG 0x30
+#define BCM63138_HW_POLARITY 0xb4
+#define BCM63138_SW_DATA 0xb8
+#define BCM63138_SW_POLARITY 0xbc
+#define BCM63138_PARALLEL_LED_POLARITY 0xc0
+#define BCM63138_SERIAL_LED_POLARITY 0xc4
+#define BCM63138_HW_LED_STATUS 0xc8
+#define BCM63138_FLASH_CTRL_STATUS 0xcc
+#define BCM63138_FLASH_BRT_CTRL 0xd0
+#define BCM63138_FLASH_P_LED_OUT_STATUS 0xd4
+#define BCM63138_FLASH_S_LED_OUT_STATUS 0xd8
+
+struct bcm63138_leds {
+ struct device *dev;
+ void __iomem *base;
+ spinlock_t lock;
+};
+
+struct bcm63138_led {
+ struct bcm63138_leds *leds;
+ struct led_classdev cdev;
+ u32 pin;
+ bool active_low;
+};
+
+/*
+ * I/O access
+ */
+
+static void bcm63138_leds_write(struct bcm63138_leds *leds, unsigned int reg,
+ u32 data)
+{
+ writel(data, leds->base + reg);
+}
+
+static unsigned long bcm63138_leds_read(struct bcm63138_leds *leds,
+ unsigned int reg)
+{
+ return readl(leds->base + reg);
+}
+
+static void bcm63138_leds_update_bits(struct bcm63138_leds *leds,
+ unsigned int reg, u32 mask, u32 val)
+{
+ WARN_ON(val & ~mask);
+
+ bcm63138_leds_write(leds, reg, (bcm63138_leds_read(leds, reg) & ~mask) | (val & mask));
+}
+
+/*
+ * Helpers
+ */
+
+static void bcm63138_leds_set_flash_rate(struct bcm63138_leds *leds,
+ struct bcm63138_led *led,
+ u8 value)
+{
+ int reg_offset = (led->pin >> fls((BCM63138_LEDS_PER_REG - 1))) * 4;
+ int shift = (led->pin & (BCM63138_LEDS_PER_REG - 1)) * BCM63138_LED_BITS;
+
+ bcm63138_leds_update_bits(leds, BCM63138_FLASH_RATE_CTRL1 + reg_offset,
+ BCM63138_LED_MASK << shift, value << shift);
+}
+
+static void bcm63138_leds_set_bright(struct bcm63138_leds *leds,
+ struct bcm63138_led *led,
+ u8 value)
+{
+ int reg_offset = (led->pin >> fls((BCM63138_LEDS_PER_REG - 1))) * 4;
+ int shift = (led->pin & (BCM63138_LEDS_PER_REG - 1)) * BCM63138_LED_BITS;
+
+ bcm63138_leds_update_bits(leds, BCM63138_BRIGHT_CTRL1 + reg_offset,
+ BCM63138_LED_MASK << shift, value << shift);
+}
+
+static void bcm63138_leds_enable_led(struct bcm63138_leds *leds,
+ struct bcm63138_led *led,
+ enum led_brightness value)
+{
+ u32 bit = BIT(led->pin);
+
+ bcm63138_leds_update_bits(leds, BCM63138_SW_DATA, bit,
+ value == LED_OFF ? 0 : bit);
+}
+
+/*
+ * API callbacks
+ */
+
+static void bcm63138_leds_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct bcm63138_led *led = container_of(led_cdev, struct bcm63138_led, cdev);
+ struct bcm63138_leds *leds = led->leds;
+ unsigned long flags;
+
+ spin_lock_irqsave(&leds->lock, flags);
+
+ bcm63138_leds_enable_led(leds, led, value);
+ if (!value)
+ bcm63138_leds_set_flash_rate(leds, led, 0);
+ else
+ bcm63138_leds_set_bright(leds, led, value);
+
+ spin_unlock_irqrestore(&leds->lock, flags);
+}
+
+static int bcm63138_leds_blink_set(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct bcm63138_led *led = container_of(led_cdev, struct bcm63138_led, cdev);
+ struct bcm63138_leds *leds = led->leds;
+ unsigned long flags;
+ u8 value;
+
+ if (!*delay_on && !*delay_off) {
+ *delay_on = 640;
+ *delay_off = 640;
+ }
+
+ if (*delay_on != *delay_off) {
+ dev_dbg(led_cdev->dev, "Blinking at unequal delays is not supported\n");
+ return -EINVAL;
+ }
+
+ switch (*delay_on) {
+ case 1152 ... 1408: /* 1280 ms ± 10% */
+ value = 0x7;
+ break;
+ case 576 ... 704: /* 640 ms ± 10% */
+ value = 0x6;
+ break;
+ case 288 ... 352: /* 320 ms ± 10% */
+ value = 0x5;
+ break;
+ case 126 ... 154: /* 140 ms ± 10% */
+ value = 0x4;
+ break;
+ case 59 ... 72: /* 65 ms ± 10% */
+ value = 0x3;
+ break;
+ default:
+ dev_dbg(led_cdev->dev, "Blinking delay value %lu is unsupported\n",
+ *delay_on);
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&leds->lock, flags);
+
+ bcm63138_leds_enable_led(leds, led, BCM63138_MAX_BRIGHTNESS);
+ bcm63138_leds_set_flash_rate(leds, led, value);
+
+ spin_unlock_irqrestore(&leds->lock, flags);
+
+ return 0;
+}
+
+/*
+ * LED driver
+ */
+
+static void bcm63138_leds_create_led(struct bcm63138_leds *leds,
+ struct device_node *np)
+{
+ struct led_init_data init_data = {
+ .fwnode = of_fwnode_handle(np),
+ };
+ struct device *dev = leds->dev;
+ struct bcm63138_led *led;
+ struct pinctrl *pinctrl;
+ u32 bit;
+ int err;
+
+ led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL);
+ if (!led) {
+ dev_err(dev, "Failed to alloc LED\n");
+ return;
+ }
+
+ led->leds = leds;
+
+ if (of_property_read_u32(np, "reg", &led->pin)) {
+ dev_err(dev, "Missing \"reg\" property in %pOF\n", np);
+ goto err_free;
+ }
+
+ if (led->pin >= BCM63138_MAX_LEDS) {
+ dev_err(dev, "Invalid \"reg\" value %d\n", led->pin);
+ goto err_free;
+ }
+
+ led->active_low = of_property_read_bool(np, "active-low");
+
+ led->cdev.max_brightness = BCM63138_MAX_BRIGHTNESS;
+ led->cdev.brightness_set = bcm63138_leds_brightness_set;
+ led->cdev.blink_set = bcm63138_leds_blink_set;
+
+ err = devm_led_classdev_register_ext(dev, &led->cdev, &init_data);
+ if (err) {
+ dev_err(dev, "Failed to register LED %pOF: %d\n", np, err);
+ goto err_free;
+ }
+
+ pinctrl = devm_pinctrl_get_select_default(led->cdev.dev);
+ if (IS_ERR(pinctrl) && PTR_ERR(pinctrl) != -ENODEV) {
+ dev_warn(led->cdev.dev, "Failed to select %pOF pinctrl: %ld\n",
+ np, PTR_ERR(pinctrl));
+ }
+
+ bit = BIT(led->pin);
+ bcm63138_leds_update_bits(leds, BCM63138_PARALLEL_LED_POLARITY, bit,
+ led->active_low ? 0 : bit);
+ bcm63138_leds_update_bits(leds, BCM63138_HW_LED_EN, bit, 0);
+ bcm63138_leds_set_flash_rate(leds, led, 0);
+ bcm63138_leds_enable_led(leds, led, led->cdev.brightness);
+
+ return;
+
+err_free:
+ devm_kfree(dev, led);
+}
+
+static int bcm63138_leds_probe(struct platform_device *pdev)
+{
+ struct device_node *np = dev_of_node(&pdev->dev);
+ struct device *dev = &pdev->dev;
+ struct bcm63138_leds *leds;
+ struct device_node *child;
+
+ leds = devm_kzalloc(dev, sizeof(*leds), GFP_KERNEL);
+ if (!leds)
+ return -ENOMEM;
+
+ leds->dev = dev;
+
+ leds->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(leds->base))
+ return PTR_ERR(leds->base);
+
+ spin_lock_init(&leds->lock);
+
+ bcm63138_leds_write(leds, BCM63138_GLB_CTRL,
+ BCM63138_GLB_CTRL_SERIAL_LED_DATA_PPOL |
+ BCM63138_GLB_CTRL_SERIAL_LED_EN_POL);
+ bcm63138_leds_write(leds, BCM63138_HW_LED_EN, 0);
+ bcm63138_leds_write(leds, BCM63138_SERIAL_LED_POLARITY, 0);
+ bcm63138_leds_write(leds, BCM63138_PARALLEL_LED_POLARITY, 0);
+
+ for_each_available_child_of_node(np, child) {
+ bcm63138_leds_create_led(leds, child);
+ }
+
+ return 0;
+}
+
+static const struct of_device_id bcm63138_leds_of_match_table[] = {
+ { .compatible = "brcm,bcm63138-leds", },
+ { },
+};
+
+static struct platform_driver bcm63138_leds_driver = {
+ .probe = bcm63138_leds_probe,
+ .driver = {
+ .name = "leds-bcm63xxx",
+ .of_match_table = bcm63138_leds_of_match_table,
+ },
+};
+
+module_platform_driver(bcm63138_leds_driver);
+
+MODULE_AUTHOR("Rafał Miłecki");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(of, bcm63138_leds_of_match_table);
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -824,6 +824,8 @@ config LEDS_LM36274
Say Y to enable the LM36274 LED driver for TI LMU devices.
This supports the LED device LM36274.
+source "drivers/leds/blink/Kconfig"
+
comment "LED Triggers"
source "drivers/leds/trigger/Kconfig"
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -95,3 +95,6 @@ obj-$(CONFIG_LEDS_USER) += uleds.o
# LED Triggers
obj-$(CONFIG_LEDS_TRIGGERS) += trigger/
+
+# LED Blink
+obj-y += blink/