mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 16:31:13 +00:00
7d7aa2fd92
This change makes the names of Broadcom targets consistent by using the common notation based on SoC/CPU ID (which is used internally anyway), bcmXXXX instead of brcmXXXX. This is even used for target TITLE in make menuconfig already, only the short target name used brcm so far. Despite, since subtargets range from bcm2708 to bcm2711, it seems appropriate to use bcm27xx instead of bcm2708 (again, as already done for BOARDNAME). This also renames the packages brcm2708-userland and brcm2708-gpu-fw. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
110 lines
2.8 KiB
Diff
110 lines
2.8 KiB
Diff
From 6cafe647492605d21c2418b6261bf3182b9229f2 Mon Sep 17 00:00:00 2001
|
|
From: Zahari Petkov <zahari@balena.io>
|
|
Date: Fri, 8 Feb 2019 13:03:38 +0200
|
|
Subject: [PATCH] overlays: balenaFin v1.1.0 carrier board update
|
|
|
|
A backward compatible update for the balenaFin carrier board for the
|
|
Raspberry Pi Compute Module 3/3+ Lite.
|
|
|
|
The updated overlay includes:
|
|
* support for the newly introduced RGB LEDs
|
|
* i2c-gpio and SDIO improvements
|
|
* DT based Marvell 88W8887 configuration
|
|
|
|
Signed-off-by: Zahari Petkov <zahari@balena.io>
|
|
---
|
|
arch/arm/boot/dts/overlays/README | 2 +-
|
|
.../boot/dts/overlays/balena-fin-overlay.dts | 46 ++++++++++++++++++-
|
|
2 files changed, 45 insertions(+), 3 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -472,7 +472,7 @@ Params: swap_lr Reverse
|
|
|
|
Name: balena-fin
|
|
Info: Overlay that enables WiFi, Bluetooth and the GPIO expander on the
|
|
- Balena Fin board.
|
|
+ balenaFin carrier board for the Raspberry Pi Compute Module 3/3+ Lite.
|
|
Load: dtoverlay=balena-fin
|
|
Params: <None>
|
|
|
|
--- a/arch/arm/boot/dts/overlays/balena-fin-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/balena-fin-overlay.dts
|
|
@@ -11,6 +11,7 @@
|
|
pinctrl-0 = <&sdio_pins>;
|
|
bus-width = <4>;
|
|
brcm,overclock-50 = <35>;
|
|
+ non-removable;
|
|
status = "okay";
|
|
};
|
|
};
|
|
@@ -34,7 +35,8 @@
|
|
fragment@2 {
|
|
target-path = "/";
|
|
__overlay__ {
|
|
- // We should investigate how to switch to mmc-pwrseq-sd8787
|
|
+ // We should switch to mmc-pwrseq-sd8787 after making it
|
|
+ // compatible with sd8887
|
|
// Currently that module requires two GPIOs to function since it
|
|
// targets a slightly different chip
|
|
power_ctrl: power_ctrl {
|
|
@@ -46,10 +48,21 @@
|
|
i2c_soft: i2c@0 {
|
|
compatible = "i2c-gpio";
|
|
gpios = <&gpio 43 0 /* sda */ &gpio 42 0 /* scl */>;
|
|
- i2c-gpio,delay-us = <2>; /* ~100 kHz */
|
|
+ i2c-gpio,delay-us = <5>;
|
|
+ i2c-gpio,scl-open-drain;
|
|
+ i2c-gpio,sda-open-drain;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
+
|
|
+ sd8xxx-wlan {
|
|
+ drvdbg = <0x6>;
|
|
+ drv_mode = <0x1>;
|
|
+ cfg80211_wext = <0xf>;
|
|
+ sta_name = "wlan";
|
|
+ wfd_name = "p2p";
|
|
+ cal_data_cfg = "none";
|
|
+ };
|
|
};
|
|
};
|
|
|
|
@@ -74,6 +87,35 @@
|
|
reg = <0x68>;
|
|
status = "okay";
|
|
};
|
|
+
|
|
+ // RGB LEDs (>= v1.1.0)
|
|
+ pca9633: pca9633@62 {
|
|
+ compatible = "nxp,pca9633";
|
|
+ reg = <0x62>;
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ red@0 {
|
|
+ label = "red";
|
|
+ reg = <0>;
|
|
+ linux,default-trigger = "none";
|
|
+ };
|
|
+ green@1 {
|
|
+ label = "green";
|
|
+ reg = <1>;
|
|
+ linux,default-trigger = "none";
|
|
+ };
|
|
+ blue@2 {
|
|
+ label = "blue";
|
|
+ reg = <2>;
|
|
+ linux,default-trigger = "none";
|
|
+ };
|
|
+ unused@3 {
|
|
+ label = "unused";
|
|
+ reg = <3>;
|
|
+ linux,default-trigger = "none";
|
|
+ };
|
|
+ };
|
|
};
|
|
};
|
|
};
|