ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-22 15:02:32 +00:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
af0546da34
openwrt/target/linux/layerscape/image/armv8_64b.mk
Mathew McBride af0546da34 layerscape: armv8_64b: add Traverse Ten64 NAND variant 
The Ten64 board[1] is based around NXP's Layerscape LS1088A SoC.
It is capable of booting both standard Linux distributions
from disk devices, using EFI, and booting OpenWrt
from NAND.

See the online manual for more information, including the
flash layout[2].

This patchset adds support for generating Ten64 images
for NAND boot.
For disk boot, one can use the EFI support that was
recently added to the armvirt target.

We previously supported NAND users by building
inside our armvirt/EFI target[3], but this approach
is not suitable for OpenWrt upstream. Users who
used our supplied NAND images will be able to upgrade
to this via sysupgrade.

Signed-off-by: Mathew McBride <matt@traverse.com.au>

[1] - https://www.traverse.com.au/hardware/ten64
[2] - https://ten64doc.traverse.com.au/hardware/flash/
[3] - Example:
285e4360e1
2023-06-25 16:02:19 +02:00

486 lines
15 KiB
Makefile
Raw Blame History

# SPDX-License-Identifier: GPL-2.0-only
#
# Copyright 2018-2020 NXP
define Device/Default
PROFILES := Default
IMAGES := firmware.bin sysupgrade.bin
FILESYSTEMS := squashfs
KERNEL := kernel-bin | gzip | uImage gzip
KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
KERNEL_LOADADDR := 0x80000000
DEVICE_DTS = freescale/$(subst _,-,$(1))
IMAGE_SIZE := 64m
IMAGE/sysupgrade.bin = \
ls-append-dtb $$(DEVICE_DTS) | pad-to 1M | \
append-kernel | pad-to 17M | \
append-rootfs | pad-rootfs | \
check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
endef
define Device/fsl-sdboot
KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
IMAGES := sdcard.img.gz sysupgrade.bin
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
define Device/fsl_ls1012a-frdm
DEVICE_VENDOR := NXP
DEVICE_MODEL := FRDM-LS1012A
DEVICE_PACKAGES += \
layerscape-ppfe \
trusted-firmware-a-ls1012a-frdm \
kmod-ppfe
BLOCKSIZE := 256KiB
IMAGE/firmware.bin := \
ls-clean | \
ls-append $(1)-bl2.pbl | pad-to 1M | \
ls-append $(1)-fip.bin | pad-to 5M | \
ls-append $(1)-uboot-env.bin | pad-to 10M | \
ls-append pfe.itb | pad-to 15M | \
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
append-kernel | pad-to $$(BLOCKSIZE) | \
append-rootfs | pad-rootfs | check-size
IMAGE/sysupgrade.bin := \
append-kernel | pad-to $$(BLOCKSIZE) | \
append-rootfs | pad-rootfs | \
check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
KERNEL := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
endef
TARGET_DEVICES += fsl_ls1012a-frdm
define Device/fsl_ls1012a-rdb
$(Device/fix-sysupgrade)
DEVICE_VENDOR := NXP
DEVICE_MODEL := LS1012A-RDB
DEVICE_PACKAGES += \
layerscape-ppfe \
trusted-firmware-a-ls1012a-rdb \
kmod-hwmon-ina2xx \
kmod-iio-fxas21002c-i2c \
kmod-iio-fxos8700-i2c \
kmod-ppfe
IMAGE/firmware.bin := \
ls-clean | \
ls-append $(1)-bl2.pbl | pad-to 1M | \
ls-append $(1)-fip.bin | pad-to 5M | \
ls-append $(1)-uboot-env.bin | pad-to 10M | \
ls-append pfe.itb | pad-to 15M | \
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
append-kernel | pad-to 32M | \
append-rootfs | pad-rootfs | check-size
endef
TARGET_DEVICES += fsl_ls1012a-rdb
define Device/fsl_ls1012a-frwy-sdboot
$(Device/rework-sdcard-images)
$(Device/fsl-sdboot)
DEVICE_VENDOR := NXP
DEVICE_MODEL := FRWY-LS1012A
DEVICE_PACKAGES += \
layerscape-ppfe \
trusted-firmware-a-ls1012a-frwy-sdboot \
kmod-ppfe
DEVICE_DTS := freescale/fsl-ls1012a-frwy
IMAGES += firmware.bin
IMAGE/firmware.bin := \
ls-clean | \
ls-append $(1)-bl2.pbl | pad-to 128K | \
ls-append pfe.itb | pad-to 384K | \
ls-append $(1)-fip.bin | pad-to 1856K | \
ls-append $(1)-uboot-env.bin | pad-to 2048K | \
check-size 2097153
IMAGE/sdcard.img.gz := \
ls-clean | \
ls-append-sdhead $(1) | pad-to 16M | \
ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
endef
TARGET_DEVICES += fsl_ls1012a-frwy-sdboot
define Device/fsl_ls1028a-rdb
DEVICE_VENDOR := NXP
DEVICE_MODEL := LS1028A-RDB
DEVICE_VARIANT := Default
DEVICE_DTS := freescale/fsl-ls1028a-rdb
KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
DEVICE_PACKAGES += \
trusted-firmware-a-ls1028a-rdb \
kmod-hwmon-ina2xx \
kmod-hwmon-lm90 \
kmod-rtc-pcf2127
IMAGE/firmware.bin := \
ls-clean | \
ls-append $(1)-bl2.pbl | pad-to 1M | \
ls-append $(1)-fip.bin | pad-to 5M | \
ls-append $(1)-uboot-env.bin | pad-to 16M | \
append-kernel | \
append-rootfs | pad-rootfs | check-size
IMAGE/sysupgrade.bin := \
append-kernel | \
append-rootfs | pad-rootfs | \
check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
endef
TARGET_DEVICES += fsl_ls1028a-rdb
define Device/fsl_ls1028a-rdb-sdboot
$(Device/fsl-sdboot)
DEVICE_VENDOR := NXP
DEVICE_MODEL := LS1028A-RDB
DEVICE_VARIANT := SD Card Boot
DEVICE_DTS := freescale/fsl-ls1028a-rdb
DEVICE_PACKAGES += \
trusted-firmware-a-ls1028a-rdb-sdboot \
kmod-hwmon-ina2xx \
kmod-hwmon-lm90 \
kmod-rtc-pcf2127
IMAGE/sdcard.img.gz := \
ls-clean | \
ls-append-sdhead $(1) | pad-to 4K | \
ls-append $(1)-bl2.pbl | pad-to 1M | \
ls-append $(1)-fip.bin | pad-to 5M | \
ls-append $(1)-uboot-env.bin | pad-to 16M | \
ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
endef
TARGET_DEVICES += fsl_ls1028a-rdb-sdboot
define Device/fsl_ls1043a-rdb
$(Device/fix-sysupgrade)
DEVICE_VENDOR := NXP
DEVICE_MODEL := LS1043A-RDB
DEVICE_VARIANT := Default
DEVICE_PACKAGES += \
layerscape-fman \
trusted-firmware-a-ls1043a-rdb \
fmc fmc-eth-config \
kmod-ahci-qoriq \
kmod-hwmon-ina2xx \
kmod-hwmon-lm90
DEVICE_DTS := freescale/fsl-ls1043a-rdb
IMAGE/firmware.bin := \
ls-clean | \
ls-append $(1)-bl2.pbl | pad-to 1M | \
ls-append $(1)-fip.bin | pad-to 5M | \
ls-append $(1)-uboot-env.bin | pad-to 9M | \
ls-append $(1)-fman.bin | pad-to 15M | \
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
append-kernel | pad-to 32M | \
append-rootfs | pad-rootfs | check-size
endef
TARGET_DEVICES += fsl_ls1043a-rdb
define Device/fsl_ls1043a-rdb-sdboot
$(Device/rework-sdcard-images)
$(Device/fsl-sdboot)
DEVICE_VENDOR := NXP
DEVICE_MODEL := LS1043A-RDB
DEVICE_VARIANT := SD Card Boot
DEVICE_PACKAGES += \
layerscape-fman \
trusted-firmware-a-ls1043a-rdb-sdboot \
fmc fmc-eth-config \
kmod-ahci-qoriq \
kmod-hwmon-ina2xx \
kmod-hwmon-lm90
DEVICE_DTS := freescale/fsl-ls1043a-rdb
IMAGE/sdcard.img.gz := \
ls-clean | \
ls-append-sdhead $(1) | pad-to 4K | \
ls-append $(1)-bl2.pbl | pad-to 1M | \
ls-append $(1)-fip.bin | pad-to 5M | \
ls-append $(1)-uboot-env.bin | pad-to 9M | \
ls-append fsl_ls1043a-rdb-fman.bin | pad-to 16M | \
ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
endef
TARGET_DEVICES += fsl_ls1043a-rdb-sdboot
define Device/fsl_ls1046a-frwy
DEVICE_VENDOR := NXP
DEVICE_MODEL := FRWY-LS1046A
DEVICE_VARIANT := Default
DEVICE_PACKAGES += \
layerscape-fman \
trusted-firmware-a-ls1046a-frwy
DEVICE_DTS := freescale/fsl-ls1046a-frwy
IMAGE/firmware.bin := \
ls-clean | \
ls-append $(1)-bl2.pbl | pad-to 1M | \
ls-append $(1)-fip.bin | pad-to 5M | \
ls-append $(1)-uboot-env.bin | pad-to 9M | \
ls-append fsl_ls1046a-rdb-fman.bin | pad-to 15M | \
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
append-kernel | pad-to 32M | \
append-rootfs | pad-rootfs | check-size
endef
TARGET_DEVICES += fsl_ls1046a-frwy
define Device/fsl_ls1046a-frwy-sdboot
$(Device/fsl-sdboot)
DEVICE_VENDOR := NXP
DEVICE_MODEL := FRWY-LS1046A
DEVICE_VARIANT := SD Card Boot
DEVICE_PACKAGES += \
layerscape-fman \
trusted-firmware-a-ls1046a-frwy-sdboot
DEVICE_DTS := freescale/fsl-ls1046a-frwy
IMAGE/sdcard.img.gz := \
ls-clean | \
ls-append-sdhead $(1) | pad-to 4K | \
ls-append $(1)-bl2.pbl | pad-to 1M | \
ls-append $(1)-fip.bin | pad-to 5M | \
ls-append $(1)-uboot-env.bin | pad-to 9M | \
ls-append fsl_ls1046a-rdb-fman.bin | pad-to 16M | \
ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
endef
TARGET_DEVICES += fsl_ls1046a-frwy-sdboot
define Device/fsl_ls1046a-rdb
$(Device/fix-sysupgrade)
DEVICE_VENDOR := NXP
DEVICE_MODEL := LS1046A-RDB
DEVICE_VARIANT := Default
DEVICE_PACKAGES += \
layerscape-fman \
trusted-firmware-a-ls1046a-rdb \
fmc fmc-eth-config \
kmod-ahci-qoriq \
kmod-hwmon-ina2xx \
kmod-hwmon-lm90
DEVICE_DTS := freescale/fsl-ls1046a-rdb
IMAGE/firmware.bin := \
ls-clean | \
ls-append $(1)-bl2.pbl | pad-to 1M | \
ls-append $(1)-fip.bin | pad-to 5M | \
ls-append $(1)-uboot-env.bin | pad-to 9M | \
ls-append $(1)-fman.bin | pad-to 15M | \
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
append-kernel | pad-to 32M | \
append-rootfs | pad-rootfs | check-size
endef
TARGET_DEVICES += fsl_ls1046a-rdb
define Device/fsl_ls1046a-rdb-sdboot
$(Device/rework-sdcard-images)
$(Device/fsl-sdboot)
DEVICE_VENDOR := NXP
DEVICE_MODEL := LS1046A-RDB
DEVICE_VARIANT := SD Card Boot
DEVICE_PACKAGES += \
layerscape-fman \
trusted-firmware-a-ls1046a-rdb-sdboot \
fmc fmc-eth-config \
kmod-ahci-qoriq \
kmod-hwmon-ina2xx \
kmod-hwmon-lm90
DEVICE_DTS := freescale/fsl-ls1046a-rdb
IMAGE/sdcard.img.gz := \
ls-clean | \
ls-append-sdhead $(1) | pad-to 4K | \
ls-append $(1)-bl2.pbl | pad-to 1M | \
ls-append $(1)-fip.bin | pad-to 5M | \
ls-append $(1)-uboot-env.bin | pad-to 9M | \
ls-append fsl_ls1046a-rdb-fman.bin | pad-to 16M | \
ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
endef
TARGET_DEVICES += fsl_ls1046a-rdb-sdboot
define Device/fsl_ls1088a-rdb
$(Device/fix-sysupgrade)
DEVICE_VENDOR := NXP
DEVICE_MODEL := LS1088A-RDB
DEVICE_VARIANT := Default
DEVICE_PACKAGES += \
layerscape-mc \
layerscape-dpl \
trusted-firmware-a-ls1088a-rdb \
restool \
kmod-ahci-qoriq \
kmod-hwmon-ina2xx \
kmod-hwmon-lm90
IMAGE/firmware.bin := \
ls-clean | \
ls-append $(1)-bl2.pbl | pad-to 1M | \
ls-append $(1)-fip.bin | pad-to 5M | \
ls-append $(1)-uboot-env.bin | pad-to 10M | \
ls-append $(1)-mc.itb | pad-to 13M | \
ls-append $(1)-dpl.dtb | pad-to 14M | \
ls-append $(1)-dpc.dtb | pad-to 15M | \
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
append-kernel | pad-to 32M | \
append-rootfs | pad-rootfs | check-size
endef
TARGET_DEVICES += fsl_ls1088a-rdb
define Device/fsl_ls1088a-rdb-sdboot
$(Device/rework-sdcard-images)
$(Device/fsl-sdboot)
DEVICE_VENDOR := NXP
DEVICE_MODEL := LS1088A-RDB
DEVICE_VARIANT := SD Card Boot
DEVICE_PACKAGES += \
layerscape-mc \
layerscape-dpl \
trusted-firmware-a-ls1088a-rdb-sdboot \
restool \
kmod-ahci-qoriq \
kmod-hwmon-ina2xx \
kmod-hwmon-lm90
DEVICE_DTS := freescale/fsl-ls1088a-rdb
IMAGE/sdcard.img.gz := \
ls-clean | \
ls-append-sdhead $(1) | pad-to 4K | \
ls-append $(1)-bl2.pbl | pad-to 1M | \
ls-append $(1)-fip.bin | pad-to 5M | \
ls-append $(1)-uboot-env.bin | pad-to 10M | \
ls-append fsl_ls1088a-rdb-mc.itb | pad-to 13M | \
ls-append fsl_ls1088a-rdb-dpl.dtb | pad-to 14M | \
ls-append fsl_ls1088a-rdb-dpc.dtb | pad-to 16M | \
ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
endef
TARGET_DEVICES += fsl_ls1088a-rdb-sdboot
define Device/fsl_ls2088a-rdb
$(Device/fix-sysupgrade)
DEVICE_VENDOR := NXP
DEVICE_MODEL := LS2088ARDB
DEVICE_PACKAGES += \
layerscape-mc \
layerscape-dpl \
trusted-firmware-a-ls2088a-rdb \
restool \
kmod-ahci-qoriq
IMAGE/firmware.bin := \
ls-clean | \
ls-append $(1)-bl2.pbl | pad-to 1M | \
ls-append $(1)-fip.bin | pad-to 5M | \
ls-append $(1)-uboot-env.bin | pad-to 10M | \
ls-append $(1)-mc.itb | pad-to 13M | \
ls-append $(1)-dpl.dtb | pad-to 14M | \
ls-append $(1)-dpc.dtb | pad-to 15M | \
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
append-kernel | pad-to 32M | \
append-rootfs | pad-rootfs | check-size
endef
TARGET_DEVICES += fsl_ls2088a-rdb
define Device/fsl_lx2160a-rdb
DEVICE_VENDOR := NXP
DEVICE_MODEL := LX2160A-RDB
DEVICE_VARIANT := Rev2.0 silicon
DEVICE_PACKAGES += \
layerscape-mc \
layerscape-dpl \
layerscape-ddr-phy \
trusted-firmware-a-lx2160a-rdb \
restool
IMAGE/firmware.bin := \
ls-clean | \
ls-append $(1)-bl2.pbl | pad-to 1M | \
ls-append $(1)-fip.bin | pad-to 5M | \
ls-append $(1)-uboot-env.bin | pad-to 8M | \
ls-append $(1)-fip_ddr_all.bin | pad-to 10M | \
ls-append $(1)-mc.itb | pad-to 13M | \
ls-append $(1)-dpl.dtb | pad-to 14M | \
ls-append $(1)-dpc.dtb | pad-to 15M | \
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
append-kernel | pad-to 32M | \
append-rootfs | pad-rootfs | check-size
endef
TARGET_DEVICES += fsl_lx2160a-rdb
define Device/fsl_lx2160a-rdb-sdboot
$(Device/fsl-sdboot)
DEVICE_VENDOR := NXP
DEVICE_MODEL := LX2160A-RDB
DEVICE_VARIANT := Rev2.0 silicon SD Card Boot
DEVICE_PACKAGES += \
layerscape-mc \
layerscape-dpl \
layerscape-ddr-phy \
trusted-firmware-a-lx2160a-rdb-sdboot \
restool
DEVICE_DTS := freescale/fsl-lx2160a-rdb
IMAGE/sdcard.img.gz := \
ls-clean | \
ls-append-sdhead $(1) | pad-to 4K | \
ls-append $(1)-bl2.pbl | pad-to 1M | \
ls-append $(1)-fip.bin | pad-to 5M | \
ls-append $(1)-uboot-env.bin | pad-to 8M | \
ls-append fsl_lx2160a-rdb-fip_ddr_all.bin | pad-to 10M | \
ls-append fsl_lx2160a-rdb-mc.itb | pad-to 13M | \
ls-append fsl_lx2160a-rdb-dpl.dtb | pad-to 14M | \
ls-append fsl_lx2160a-rdb-dpc.dtb | pad-to 16M | \
ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
endef
TARGET_DEVICES += fsl_lx2160a-rdb-sdboot
define Device/traverse_ls1043
DEVICE_VENDOR := Traverse
DEVICE_MODEL := LS1043 Boards
KERNEL_NAME := Image
KERNEL_SUFFIX := -kernel.itb
KERNEL_INSTALL := 1
FDT_LOADADDR = 0x90000000
FILESYSTEMS := ubifs
MKUBIFS_OPTS := -m 1 -e 262016 -c 128
DEVICE_PACKAGES += \
layerscape-fman \
uboot-envtools \
kmod-i2c-mux-pca954x \
kmod-hwmon-core \
kmod-gpio-pca953x kmod-input-gpio-keys-polled \
kmod-rtc-isl1208
DEVICE_DESCRIPTION = \
Build images for Traverse LS1043 boards. This generates a single image \
capable of booting on any of the boards in this family.
DEVICE_DTS = freescale/traverse-ls1043s
DEVICE_DTS_DIR = $(LINUX_DIR)/arch/arm64/boot/dts
DEVICE_DTS_CONFIG = ls1043s
KERNEL := kernel-bin | gzip | traverse-fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
IMAGES = root sysupgrade.bin
IMAGE/root = append-rootfs
IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
MKUBIFS_OPTS := -m 2048 -e 124KiB -c 4096
SUPPORTED_DEVICES := traverse,ls1043s traverse,ls1043v
endef
TARGET_DEVICES += traverse_ls1043
define Device/traverse_ten64_mtd
DEVICE_VENDOR := Traverse
DEVICE_MODEL := Ten64 (NAND boot)
DEVICE_NAME := ten64-mtd
DEVICE_PACKAGES += \
uboot-envtools \
kmod-rtc-rx8025 \
kmod-sfp \
kmod-i2c-mux-pca954x \
restool
DEVICE_DESCRIPTION = \
Generate images for booting from NAND/ubifs on Traverse Ten64 (LS1088A) \
family boards. For disk (NVMe/USB/SD) boot, use the armvirt target instead.
FILESYSTEMS := squashfs
KERNEL_LOADADDR := 0x80000000
KERNEL_ENTRY_POINT := 0x80000000
FDT_LOADADDR := 0x90000000
KERNEL_SUFFIX := -kernel.itb
DEVICE_DTS := freescale/fsl-ls1088a-ten64
IMAGES := nand.ubi sysupgrade.bin
KERNEL := kernel-bin | gzip | traverse-fit-ls1088 gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb $$(FDT_LOADADDR)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/nand.ubi := append-ubi
KERNEL_IN_UBI := 1
BLOCKSIZE := 128KiB
PAGESIZE := 2048
MKUBIFS_OPTS := -m $$(PAGESIZE) -e 124KiB -c 600
SUPPORTED_DEVICES = traverse,ten64
endef
TARGET_DEVICES += traverse_ten64_mtd
Reference in New Issue View Git Blame Copy Permalink