ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-19 21:58:04 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity
This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git.
32,594 Commits 9 Branches 74 Tags 903 MiB
C 61.2%
Makefile 19.2%
Shell 6.9%
Roff 6.7%
Perl 2.5%
Other 3.4%
aecac14cc4
Go to file
John Crispin aecac14cc4 ramips: Enable rx of 1536 bytes ethernet frames on MT7621 
The default switch frame size (with FCS + header) is 1536 bytes. But the
GMAC only accepted frames up to 1522 bytes. Setting it to 1536 allows to
receive ethernet frames using the full of MTU 1500 + an extra VLAN header +
VLAN header added by the switch.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 47117
2015-10-05 10:26:34 +00:00
config linux: make IPv6 builtin if selected (saves >30KB) 2015-09-09 12:20:36 +00:00
docs build: Prevent more gzip timestamps 2015-07-14 09:57:45 +00:00
include kernel: update 4.1 to 4.1.10 2015-10-04 11:34:39 +00:00
package iwinfo: nl80211: add support for reading TX power from netlink 2015-10-05 09:10:17 +00:00
scripts scripts/om-fwupgradecfg-gen.sh: add support for the MR1750 2015-09-14 20:11:18 +00:00
target ramips: Enable rx of 1536 bytes ethernet frames on MT7621 2015-10-05 10:26:34 +00:00
toolchain musl: re-enable des crypto support, fixes pppd MPPE issues 2015-10-01 19:50:06 +00:00
tools quilt: add further relocatability fixes 2015-09-29 11:37:27 +00:00
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 2012-05-08 13:30:49 +00:00
.gitignore build: add integration for managing opkg package feed keys 2015-04-06 19:39:51 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in scripts/config: sync with linux upstream 2015-01-08 14:33:53 +00:00
feeds.conf.default feeds.conf.default: add new targets feed 2015-03-19 11:58:35 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile Makefile: move the cleaning of staging_dir/target* from dirclean to clean 2015-06-14 17:47:16 +00:00
README Add 'subversion' build dependency to README 2014-08-31 12:06:32 +00:00
rules.mk rules.mk: remove GCC 4.4 and GCC 4.5 conditional 2015-08-25 07:45:42 +00:00

README 

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org