Rafał Miłecki cc51d97200 bcm4908: enable Netgear R8000P bootloader image ... This enables building BCM4908 "raw" image that can be flashed using bootloader web UI. It requires serial console access & stopping booting by the "Press any key to stop auto run". It's easy to build vendor like CHK image but it can't be safely flashed using vendor UI at this point. Netgear implements method called "NAND incremental flashing" that doesn't seem to flash bootfs partition as provided. Above method seems to update vmlinux.lz without updating 94908.dtb. It prevents OpenWrt kernel from booting due to incomplete DTB file. Full Netgear R8000P support can be enabled after finding a way to make vendor firmware flash OpenWrt firmware including the 94908.dtb update. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit d92a9c97bf)		2021-04-08 13:16:14 +02:00
..
base-files	bcm4908: add sysupgrade support	2021-04-08 13:16:13 +02:00
files-5.4/drivers/net/ethernet/broadcom	bcm4908: add Ethernet driver	2021-02-08 11:49:21 +01:00
generic	bcm4908: initial work on the Broadcom BCM4908 target	2021-01-12 21:10:51 +01:00
image	bcm4908: enable Netgear R8000P bootloader image	2021-04-08 13:16:14 +02:00
patches-5.4	bcm4908: backport DT patch adding Ethernet MAC address	2021-04-08 13:16:11 +02:00
config-5.4	bcm4908: enable JFFS2 support	2021-04-08 13:16:12 +02:00
Makefile	bcm4908: enable target & Asus GT-AC5300 image	2021-04-08 13:16:14 +02:00