Sebastian Quilitz ae79c41286 ipq806x: add support for TP-Link Archer VR2600v ... This router is similar to the C2600. Ethernet on WAN + LAN, switch, sysupgrade, LEDs, buttons and WiFi on 2G + 5G do work. The xDSL modem and the POTS/DECT interface are not supported yet. It is not possible to flash LEDE via the TP-Link webinterface. The image need to be signed. The first 0x200 bytes of the image is the TP-Link header including the signature. The signature is not validated by the bootloader. The LEDE image is zeroed in this area. To install LEDE it is necessary to solder a four pin header to JP2. Connect a serial interface to this header and interrupt the autostart of kernel. Transfer the sysupgrade image via TFTP and write it to the serial flash at 0x320000. Signed-off-by: Sebastian Quilitz <zeraphim@x-pantion.de>		2016-11-24 22:37:40 +01:00
..
imagebuilder	target/imagebuilder: Switch to xz compression instead of bz2	2016-10-15 11:36:51 +02:00
linux	ipq806x: add support for TP-Link Archer VR2600v	2016-11-24 22:37:40 +01:00
sdk	target/sdk: Switch to xz compression instead of bz2	2016-11-04 11:38:19 +01:00
toolchain	target/toolchain: Fix toolchain packaging without package build	2016-09-06 11:40:12 +02:00
Config.in	kernel: add plan 9 fs package	2016-08-11 10:45:33 +02:00
Makefile	sdk: depend on linux/install	2016-11-04 16:14:51 +01:00