mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 06:33:41 +00:00
ae67f5ffae
This commit removes the target-specific diag.sh script. This way, the generic one is used for the target, which uses DT-aliases to specify the LEDs used. Generic diag.sh allow to use different LEDs to indicate different states. Non-red status LEDs for indicating boot and a running system. Where possible, the red or orange LEDs are used to indicate failsafe mode and a running upgrade. Compile-tested: all target devices. Run-tested: CheckPoint L-50 Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [remove unrelated cosmetic changes, rename some labels, add pogo_e02] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
155 lines
3.4 KiB
Diff
155 lines
3.4 KiB
Diff
kirkwood: add nsa310b dtb, a zyxel nsa310 variant
|
|
|
|
add support to a nsa310 variant with red/green usb led
|
|
and lm85 temp/fan controller
|
|
|
|
Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
|
|
|
|
NOTE: this patch can be upstreamed as-is, LEDE-specific
|
|
nand partitions are set in another patch
|
|
|
|
--- a/arch/arm/boot/dts/Makefile
|
|
+++ b/arch/arm/boot/dts/Makefile
|
|
@@ -287,6 +287,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
|
|
kirkwood-ns2mini.dtb \
|
|
kirkwood-nsa310.dtb \
|
|
kirkwood-nsa310a.dtb \
|
|
+ kirkwood-nsa310b.dtb \
|
|
kirkwood-nsa320.dtb \
|
|
kirkwood-nsa325.dtb \
|
|
kirkwood-openblocks_a6.dtb \
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/kirkwood-nsa310b.dts
|
|
@@ -0,0 +1,131 @@
|
|
+/dts-v1/;
|
|
+
|
|
+#include "kirkwood-nsa3x0-common.dtsi"
|
|
+
|
|
+/*
|
|
+ * There are at least two different NSA310 designs. This variant has
|
|
+ * a red/green USB Led (same as nsa310) and a lm85 temp/fan controller.
|
|
+ */
|
|
+
|
|
+/ {
|
|
+ model = "ZyXEL NSA310b";
|
|
+ compatible = "zyxel,nsa310b", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
|
|
+
|
|
+ aliases {
|
|
+ led-boot = &led_green_sys;
|
|
+ led-failsafe = &led_red_sys;
|
|
+ led-running = &led_green_sys;
|
|
+ led-upgrade = &led_red_sys;
|
|
+ };
|
|
+
|
|
+ memory@0 {
|
|
+ device_type = "memory";
|
|
+ reg = <0x00000000 0x10000000>;
|
|
+ };
|
|
+
|
|
+ chosen {
|
|
+ bootargs = "console=ttyS0,115200";
|
|
+ stdout-path = &uart0;
|
|
+ };
|
|
+
|
|
+ ocp@f1000000 {
|
|
+ pinctrl: pin-controller@10000 {
|
|
+ pinctrl-names = "default";
|
|
+
|
|
+ pmx_led_esata_green: pmx-led-esata-green {
|
|
+ marvell,pins = "mpp12";
|
|
+ marvell,function = "gpio";
|
|
+ };
|
|
+
|
|
+ pmx_led_esata_red: pmx-led-esata-red {
|
|
+ marvell,pins = "mpp13";
|
|
+ marvell,function = "gpio";
|
|
+ };
|
|
+
|
|
+ pmx_led_usb_green: pmx-led-usb-green {
|
|
+ marvell,pins = "mpp15";
|
|
+ marvell,function = "gpio";
|
|
+ };
|
|
+
|
|
+ pmx_led_usb_red: pmx-led-usb-red {
|
|
+ marvell,pins = "mpp16";
|
|
+ marvell,function = "gpio";
|
|
+ };
|
|
+
|
|
+ pmx_led_sys_green: pmx-led-sys-green {
|
|
+ marvell,pins = "mpp28";
|
|
+ marvell,function = "gpio";
|
|
+ };
|
|
+
|
|
+ pmx_led_sys_red: pmx-led-sys-red {
|
|
+ marvell,pins = "mpp29";
|
|
+ marvell,function = "gpio";
|
|
+ };
|
|
+
|
|
+ pmx_led_hdd_green: pmx-led-hdd-green {
|
|
+ marvell,pins = "mpp41";
|
|
+ marvell,function = "gpio";
|
|
+ };
|
|
+
|
|
+ pmx_led_hdd_red: pmx-led-hdd-red {
|
|
+ marvell,pins = "mpp42";
|
|
+ marvell,function = "gpio";
|
|
+ };
|
|
+
|
|
+ };
|
|
+
|
|
+ i2c@11000 {
|
|
+ status = "okay";
|
|
+
|
|
+ lm85: lm85@2e {
|
|
+ compatible = "national,lm85";
|
|
+ reg = <0x2e>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ gpio-leds {
|
|
+ compatible = "gpio-leds";
|
|
+
|
|
+ led_green_sys: green-sys {
|
|
+ label = "nsa310:green:sys";
|
|
+ gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+ led_red_sys: red-sys {
|
|
+ label = "nsa310:red:sys";
|
|
+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+ green-hdd {
|
|
+ label = "nsa310:green:hdd";
|
|
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+ red-hdd {
|
|
+ label = "nsa310:red:hdd";
|
|
+ gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+ green-esata {
|
|
+ label = "nsa310:green:esata";
|
|
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+ red-esata {
|
|
+ label = "nsa310:red:esata";
|
|
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+ green-usb {
|
|
+ label = "nsa310:green:usb";
|
|
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+ red-usb {
|
|
+ label = "nsa310:red:usb";
|
|
+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+ green-copy {
|
|
+ label = "nsa310:green:copy";
|
|
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+ red-copy {
|
|
+ label = "nsa310:red:copy";
|
|
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+ };
|
|
+};
|