mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 06:33:41 +00:00
ae67f5ffae
This commit removes the target-specific diag.sh script. This way, the generic one is used for the target, which uses DT-aliases to specify the LEDs used. Generic diag.sh allow to use different LEDs to indicate different states. Non-red status LEDs for indicating boot and a running system. Where possible, the red or orange LEDs are used to indicate failsafe mode and a running upgrade. Compile-tested: all target devices. Run-tested: CheckPoint L-50 Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [remove unrelated cosmetic changes, rename some labels, add pogo_e02] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
62 lines
1.3 KiB
Diff
62 lines
1.3 KiB
Diff
--- a/arch/arm/boot/dts/kirkwood-dockstar.dts
|
|
+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
|
|
@@ -8,6 +8,13 @@
|
|
model = "Seagate FreeAgent Dockstar";
|
|
compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
|
|
|
|
+ aliases {
|
|
+ led-boot = &led_health;
|
|
+ led-failsafe = &led_fault;
|
|
+ led-running = &led_health;
|
|
+ led-upgrade = &led_fault;
|
|
+ };
|
|
+
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x8000000>;
|
|
@@ -42,12 +49,11 @@
|
|
pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
|
|
pinctrl-names = "default";
|
|
|
|
- health {
|
|
+ led_health: health {
|
|
label = "status:green:health";
|
|
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
|
|
- default-state = "keep";
|
|
};
|
|
- fault {
|
|
+ led_fault: fault {
|
|
label = "status:orange:fault";
|
|
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
|
};
|
|
@@ -78,18 +84,22 @@
|
|
|
|
partition@0 {
|
|
label = "u-boot";
|
|
- reg = <0x0000000 0x100000>;
|
|
- read-only;
|
|
+ reg = <0x0000000 0xe0000>;
|
|
+ };
|
|
+
|
|
+ partition@e0000 {
|
|
+ label = "u-boot environment";
|
|
+ reg = <0xe0000 0x100000>;
|
|
};
|
|
|
|
partition@100000 {
|
|
- label = "uImage";
|
|
- reg = <0x0100000 0x400000>;
|
|
+ label = "second stage u-boot";
|
|
+ reg = <0x100000 0x200000>;
|
|
};
|
|
|
|
- partition@500000 {
|
|
- label = "data";
|
|
- reg = <0x0500000 0xfb00000>;
|
|
+ partition@200000 {
|
|
+ label = "ubi";
|
|
+ reg = <0x200000 0xfe00000>;
|
|
};
|
|
};
|
|
|