mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 02:29:01 +00:00
2d63d42f5e
Initial conversion to new LED color/function format and drop label format where possible. The same label is composed at runtime. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
386 lines
6.8 KiB
Plaintext
386 lines
6.8 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
#include "mt7986a.dtsi"
|
|
|
|
/ {
|
|
model = "ASUS TUF-AX6000";
|
|
compatible = "asus,tuf-ax6000", "mediatek,mt7986a";
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
led-boot = &led_system;
|
|
led-failsafe = &led_system;
|
|
led-running = &led_system;
|
|
led-upgrade = &led_system;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
bootargs-override = "ubi.mtd=UBI_DEV";
|
|
};
|
|
|
|
memory {
|
|
reg = <0 0x40000000 0 0x20000000>;
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
|
|
mesh {
|
|
label = "wps";
|
|
gpios = <&pio 10 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
wlan {
|
|
function = LED_FUNCTION_WLAN;
|
|
color = <LED_COLOR_ID_WHITE>;
|
|
gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "phy1tpt";
|
|
};
|
|
|
|
led_system: system {
|
|
label = "white:system";
|
|
gpios = <&pio 11 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
wan-red {
|
|
function = LED_FUNCTION_WAN;
|
|
color = <LED_COLOR_ID_RED>;
|
|
gpios = <&pio 12 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
cover-blue {
|
|
label = "blue:cover";
|
|
gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
reg_3p3v: regulator-3p3v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_5v: regulator-5v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-5V";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
|
|
&crypto {
|
|
status = "okay";
|
|
};
|
|
|
|
ð {
|
|
status = "okay";
|
|
|
|
gmac0: mac@0 {
|
|
/* LAN */
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <0>;
|
|
phy-mode = "2500base-x";
|
|
|
|
fixed-link {
|
|
speed = <2500>;
|
|
full-duplex;
|
|
pause;
|
|
};
|
|
};
|
|
|
|
gmac1: mac@1 {
|
|
/* WAN */
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <1>;
|
|
phy-mode = "2500base-x";
|
|
phy-handle = <&phy6>;
|
|
};
|
|
|
|
mdio: mdio-bus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&mdio {
|
|
reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
|
|
reset-delay-us = <50000>;
|
|
reset-post-delay-us = <20000>;
|
|
|
|
phy5: phy@5 {
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
reg = <5>;
|
|
|
|
mxl,led-drive-vdd;
|
|
mxl,led-config = <0x03f0 0x0 0x0 0x0>;
|
|
};
|
|
|
|
phy6: phy@6 {
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
reg = <6>;
|
|
|
|
/* LED0: CONN (WAN white) */
|
|
mxl,led-config = <0x03f0 0x0 0x0 0x0>;
|
|
};
|
|
|
|
switch: switch@1f {
|
|
compatible = "mediatek,mt7531";
|
|
reg = <31>;
|
|
|
|
reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
|
|
reset-assert-us = <10000>;
|
|
reset-deassert-us = <10000>;
|
|
};
|
|
};
|
|
|
|
&pio {
|
|
spi_flash_pins: spi-flash-pins-33-to-38 {
|
|
mux {
|
|
function = "spi";
|
|
groups = "spi0", "spi0_wp_hold";
|
|
};
|
|
conf-pu {
|
|
pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
|
|
drive-strength = <8>;
|
|
mediatek,pull-up-adv = <0>; /* bias-disable */
|
|
};
|
|
conf-pd {
|
|
pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
|
|
drive-strength = <8>;
|
|
mediatek,pull-down-adv = <0>; /* bias-disable */
|
|
};
|
|
};
|
|
|
|
wf_2g_5g_pins: wf_2g_5g-pins {
|
|
mux {
|
|
function = "wifi";
|
|
groups = "wf_2g", "wf_5g";
|
|
};
|
|
conf {
|
|
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
|
|
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
|
|
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
|
|
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
|
|
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
|
|
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
|
|
"WF1_TOP_CLK", "WF1_TOP_DATA";
|
|
drive-strength = <4>;
|
|
};
|
|
};
|
|
|
|
wf_dbdc_pins: wf-dbdc-pins {
|
|
mux {
|
|
function = "wifi";
|
|
groups = "wf_dbdc";
|
|
};
|
|
conf {
|
|
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
|
|
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
|
|
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
|
|
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
|
|
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
|
|
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
|
|
"WF1_TOP_CLK", "WF1_TOP_DATA";
|
|
drive-strength = <4>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&spi0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi_flash_pins>;
|
|
status = "okay";
|
|
|
|
spi_nand_flash: flash@0 {
|
|
compatible = "spi-nand";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0>;
|
|
|
|
spi-max-frequency = <20000000>;
|
|
spi-tx-bus-width = <4>;
|
|
spi-rx-bus-width = <4>;
|
|
|
|
partitions: partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "bootloader";
|
|
reg = <0x0 0x400000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@400000 {
|
|
label = "UBI_DEV";
|
|
reg = <0x400000 0xfc00000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&switch {
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@1 {
|
|
reg = <4>;
|
|
label = "lan1";
|
|
};
|
|
|
|
port@2 {
|
|
reg = <3>;
|
|
label = "lan2";
|
|
};
|
|
|
|
port@3 {
|
|
reg = <2>;
|
|
label = "lan3";
|
|
};
|
|
|
|
port@4 {
|
|
reg = <1>;
|
|
label = "lan4";
|
|
};
|
|
|
|
port@5 {
|
|
reg = <5>;
|
|
label = "lan5";
|
|
phy-mode = "2500base-x";
|
|
phy-handle = <&phy5>;
|
|
|
|
};
|
|
|
|
port@6 {
|
|
reg = <6>;
|
|
label = "cpu";
|
|
ethernet = <&gmac0>;
|
|
phy-mode = "2500base-x";
|
|
|
|
fixed-link {
|
|
speed = <2500>;
|
|
full-duplex;
|
|
pause;
|
|
};
|
|
};
|
|
};
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
phy@1 {
|
|
reg = <1>;
|
|
|
|
mediatek,led-config = <
|
|
0x21 0x8009 /* BASIC_CTRL */
|
|
0x22 0x0c00 /* ON_DURATION */
|
|
0x23 0x1400 /* BLINK_DURATION */
|
|
0x24 0x8000 /* LED0_ON_CTRL */
|
|
0x25 0x0000 /* LED0_BLINK_CTRL */
|
|
0x26 0xc007 /* LED1_ON_CTRL */
|
|
0x27 0x003f /* LED1_BLINK_CTRL */
|
|
>;
|
|
};
|
|
|
|
phy@2 {
|
|
reg = <2>;
|
|
|
|
mediatek,led-config = <
|
|
0x21 0x8009 /* BASIC_CTRL */
|
|
0x22 0x0c00 /* ON_DURATION */
|
|
0x23 0x1400 /* BLINK_DURATION */
|
|
0x24 0x8000 /* LED0_ON_CTRL */
|
|
0x25 0x0000 /* LED0_BLINK_CTRL */
|
|
0x26 0xc007 /* LED1_ON_CTRL */
|
|
0x27 0x003f /* LED1_BLINK_CTRL */
|
|
>;
|
|
};
|
|
|
|
phy@3 {
|
|
reg = <3>;
|
|
|
|
mediatek,led-config = <
|
|
0x21 0x8009 /* BASIC_CTRL */
|
|
0x22 0x0c00 /* ON_DURATION */
|
|
0x23 0x1400 /* BLINK_DURATION */
|
|
0x24 0x8000 /* LED0_ON_CTRL */
|
|
0x25 0x0000 /* LED0_BLINK_CTRL */
|
|
0x26 0xc007 /* LED1_ON_CTRL */
|
|
0x27 0x003f /* LED1_BLINK_CTRL */
|
|
>;
|
|
};
|
|
|
|
phy@4 {
|
|
reg = <4>;
|
|
|
|
mediatek,led-config = <
|
|
0x21 0x8009 /* BASIC_CTRL */
|
|
0x22 0x0c00 /* ON_DURATION */
|
|
0x23 0x1400 /* BLINK_DURATION */
|
|
0x24 0x8000 /* LED0_ON_CTRL */
|
|
0x25 0x0000 /* LED0_BLINK_CTRL */
|
|
0x26 0xc007 /* LED1_ON_CTRL */
|
|
0x27 0x003f /* LED1_BLINK_CTRL */
|
|
>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&watchdog {
|
|
status = "okay";
|
|
};
|
|
|
|
&wifi {
|
|
status = "okay";
|
|
pinctrl-names = "default", "dbdc";
|
|
pinctrl-0 = <&wf_2g_5g_pins>;
|
|
pinctrl-1 = <&wf_dbdc_pins>;
|
|
};
|
|
|
|
&trng {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ssusb {
|
|
vusb33-supply = <®_3p3v>;
|
|
vbus-supply = <®_5v>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_phy {
|
|
status = "okay";
|
|
};
|