openwrt/target/linux/ath79/dts/qca9556_avm_fritz-repeater.dtsi
David Bauer 654eec5a2d ath79: enable SGMII workaround for affected boards
These boards suffer from a sudden inability to establish a link on the
SGMII. Enable the workaround to fix the link when it dies.

Signed-off-by: David Bauer <mail@david-bauer.net>
2020-04-27 12:22:02 +02:00

97 lines
1.3 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca955x.dtsi"
/ {
chosen {
bootargs = "console=ttyS0,115200n8";
};
keys {
compatible = "gpio-keys";
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
};
};
};
&uart {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "urlader";
reg = <0x0 0x20000>;
read-only;
};
partition@20000 {
compatible = "avm,eva-firmware";
label = "firmware";
reg = <0x20000 0xee0000>;
};
partition@f00000 {
label = "tffs (1)";
reg = <0xf00000 0x80000>;
read-only;
};
partition@f80000 {
label = "tffs (2)";
reg = <0xf80000 0x80000>;
read-only;
};
};
};
};
&wmac {
status = "okay";
qca,no-eeprom;
};
&eth1 {
status = "okay";
phy-handle = <&phy0>;
pll-data = <0x3000000 0x101 0x1313>;
qca955x-sgmii-fixup;
gmac-config {
device = <&gmac>;
ge0-sgmii = <0>;
};
};
&mdio1 {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
at803x-override-sgmii-link-check;
};
};