mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 22:23:27 +00:00
0784d07c11
Specifications:
SoC: Allwinner A64 (1.2 GHz Quad-Core ARM Cortex-A53 64-bit)
RAM: 1GB or 2GB RAM DDR3L @ 672Mhz
Flash: 0/4/16GB eMMC flash memory for storage and boot
MicroSD card connector for cards up to 32GB
Debug: serial UART debug header with 0.1" pins
Wired connectivity: 10/100/1000Mbps GbE Ethernet
Wireless connectivity: on-board RTL8723BS 1T1R 802.11bgn WiFi and
Bluetooth 4.0 module with built-in antenna
(only available in the A64-OLinuXino-1G4GW)
Flashing instructions:
Standard sunxi SD card installation procedure - copy eMMC image to SD
card, insert in into SD card slot on the device and boot. You should see
something like following if the eMMC is detected correctly:
mmcblk2: mmc2:0001 P1XXXX 3.60 GiB
mmcblk2boot0: mmc2:0001 P1XXXX partition 1 16.0 MiB
mmcblk2boot1: mmc2:0001 P1XXXX partition 2 16.0 MiB
Then flash SD card eMMC image straight into the mmcblk2 device:
dd if=/mnt/openwrt...a64-olinuxino-emmc-squashfs-sdcard.img of=/dev/mmcblk2
It also possible to boot from boot0 partition[1]:
1. Compile U-Boot with CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x40
otherwise the U-Boot will get stuck in bootloop
2. Configure eMMC to boot from boot0 partition inside U-Boot:
mmc bootbus 1 1 0 0; mmc partconf 1 1 1 0
3. echo 0 > /sys/block/mmcblk2boot0/force_ro
4. Write U-Boot from offset 0 (not offset 8k as with SD card) into
boot0 partition
dd if=u-boot-sunxi-with-spl.bin of=/dev/mmcblk2boot0
Known issues:
Wireless doesn't work properly via netifd.
1. https://linux-sunxi.org/index.php?title=Bootable_eMMC
Signed-off-by: Petr Štetiar <ynezz@true.cz>
87 lines
2.0 KiB
Makefile
87 lines
2.0 KiB
Makefile
#
|
|
# Copyright (C) 2013-2016 OpenWrt.org
|
|
# Copyright (C) 2016 Yousong Zhou
|
|
#
|
|
# This is free software, licensed under the GNU General Public License v2.
|
|
# See /LICENSE for more information.
|
|
#
|
|
|
|
define Device/sun50i
|
|
SUNXI_DTS_DIR := allwinner/
|
|
KERNEL_NAME := Image
|
|
KERNEL := kernel-bin
|
|
endef
|
|
|
|
define Device/sun50i-h5
|
|
SOC := sun50i-h5
|
|
$(Device/sun50i)
|
|
endef
|
|
|
|
define Device/sun50i-a64
|
|
SOC := sun50i-a64
|
|
$(Device/sun50i)
|
|
endef
|
|
|
|
define Device/friendlyarm_nanopi-neo-plus2
|
|
DEVICE_VENDOR := FriendlyARM
|
|
DEVICE_MODEL := NanoPi NEO Plus2
|
|
SUPPORTED_DEVICES:=nanopi-neo-plus2
|
|
$(Device/sun50i-h5)
|
|
endef
|
|
TARGET_DEVICES += friendlyarm_nanopi-neo-plus2
|
|
|
|
define Device/friendlyarm_nanopi-neo2
|
|
DEVICE_VENDOR := FriendlyARM
|
|
DEVICE_MODEL := NanoPi NEO2
|
|
SUPPORTED_DEVICES:=nanopi-neo2
|
|
$(Device/sun50i-h5)
|
|
endef
|
|
TARGET_DEVICES += friendlyarm_nanopi-neo2
|
|
|
|
define Device/olimex_a64-olinuxino
|
|
DEVICE_VENDOR := Olimex
|
|
DEVICE_MODEL := A64-Olinuxino
|
|
DEVICE_PACKAGES := kmod-rtl8723bs rtl8723bs-firmware
|
|
$(Device/sun50i-a64)
|
|
SUNXI_DTS := $$(SUNXI_DTS_DIR)$$(SOC)-olinuxino
|
|
endef
|
|
TARGET_DEVICES += olimex_a64-olinuxino
|
|
|
|
define Device/olimex_a64-olinuxino-emmc
|
|
DEVICE_VENDOR := Olimex
|
|
DEVICE_MODEL := A64-Olinuxino
|
|
DEVICE_VARIANT := eMMC
|
|
DEVICE_PACKAGES := kmod-rtl8723bs rtl8723bs-firmware
|
|
$(Device/sun50i-a64)
|
|
SUNXI_DTS := $$(SUNXI_DTS_DIR)$$(SOC)-olinuxino-emmc
|
|
endef
|
|
TARGET_DEVICES += olimex_a64-olinuxino-emmc
|
|
|
|
define Device/pine64_pine64-plus
|
|
DEVICE_VENDOR := Pine64
|
|
DEVICE_MODEL := Pine64+
|
|
$(Device/sun50i-a64)
|
|
endef
|
|
TARGET_DEVICES += pine64_pine64-plus
|
|
|
|
define Device/pine64_sopine-baseboard
|
|
DEVICE_VENDOR := Pine64
|
|
DEVICE_MODEL := SoPine
|
|
$(Device/sun50i-a64)
|
|
endef
|
|
TARGET_DEVICES += pine64_sopine-baseboard
|
|
|
|
define Device/xunlong_orangepi-pc2
|
|
DEVICE_VENDOR := Xunlong
|
|
DEVICE_MODEL := Orange Pi PC 2
|
|
$(Device/sun50i-h5)
|
|
endef
|
|
TARGET_DEVICES += xunlong_orangepi-pc2
|
|
|
|
define Device/xunlong_orangepi-zero-plus
|
|
DEVICE_VENDOR := Xunlong
|
|
DEVICE_MODEL := Orange Pi Zero Plus
|
|
$(Device/sun50i-h5)
|
|
endef
|
|
TARGET_DEVICES += xunlong_orangepi-zero-plus
|