openwrt/target/linux/ramips/dts/mt7621_elecom_wrc-1167ghbk2-s.dts
Adrian Schmutzler 556ff09875 ramips/mt762x: convert devices to interrupt-driven gpio-keys
This converts all remaining devices to use interrupt-driven
gpio-keys compatible instead of gpio-keys-polled.
The poll-interval is removed.

While at it, add/remove newlines in keys and leds node where
necessary.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-10-21 14:19:32 +02:00

157 lines
2.6 KiB
Plaintext

/dts-v1/;
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "elecom,wrc-1167ghbk2-s", "mediatek,mt7621-soc";
model = "ELECOM WRC-1167GHBK2-S";
aliases {
led-boot = &led_power_green;
led-failsafe = &led_power_green;
led-running = &led_power_green;
led-upgrade = &led_power_green;
};
chosen {
bootargs = "console=ttyS0,57600";
};
leds {
compatible = "gpio-leds";
wlan2g {
label = "wrc-1167ghbk2-s:white:wlan2g";
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0radio";
};
wlan5g {
label = "wrc-1167ghbk2-s:white:wlan5g";
gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
};
led_power_green: power_green {
label = "wrc-1167ghbk2-s:green:power";
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
};
power_blue {
label = "wrc-1167ghbk2-s:blue:power";
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
};
wps {
label = "wrc-1167ghbk2-s:red:wps";
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
};
power_red {
label = "wrc-1167ghbk2-s:red:power";
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
};
&ethernet {
mtd-mac-address = <&factory 0xe000>;
};
&spi0 {
status = "okay";
m25p80@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0xf20000>;
};
partition@f70000 {
label = "user_data";
reg = <0xf70000 0x80000>;
read-only;
};
partition@ff0000 {
label = "NVRAM";
reg = <0xff0000 0x10000>;
read-only;
};
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uart3", "jtag", "wdt";
ralink,function = "gpio";
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x0>;
mtd-mac-address = <&factory 0xe000>;
mtd-mac-address-increment = <1>;
};
};
&xhci {
status = "disabled";
};