openwrt/target/linux/ath79/dts/qca9533_tplink_cpexxx.dtsi
Adrian Schmutzler b40e6bc55f ath79: drop and consolidate redundant chosen/bootargs
In ath79, for several SoCs the console bootargs are defined to the
very same value in every device's DTS. Consolidate these definitions
in the SoC dtsi files and drop further redundant definitions elsewhere.

The only device without any bootargs set has been OpenMesh OM5P-AC V2.
This will now inherit the setting from qca955x.dtsi

While this is a cosmetic change, backporting it to 19.07 will be a
major help for anyone doing backports of device support. Without it,
every backporter would have to remember to manually add the chosen node
to the device's DTS.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 635f111148)
2020-06-28 14:24:59 +02:00

127 lines
2.0 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca953x.dtsi"
/ {
aliases {
led-boot = &led_link4;
led-failsafe = &led_link4;
led-running = &led_link4;
led-upgrade = &led_link4;
};
leds: leds {
compatible = "gpio-leds";
link1 {
label = "tp-link:green:link1";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
link2 {
label = "tp-link:green:link2";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
link3 {
label = "tp-link:green:link3";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
led_link4: link4 {
label = "tp-link:green:link4";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
reset_button {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
};
&uart {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
label = "partition-table";
reg = <0x020000 0x010000>;
read-only;
};
info: partition@30000 {
label = "info";
reg = <0x030000 0x010000>;
read-only;
};
partition@40000 {
label = "firmware";
reg = <0x040000 0x780000>;
compatible = "tplink,firmware";
};
config: partition@7c0000 {
label = "config";
reg = <0x7c0000 0x030000>;
read-only;
};
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&info 0x8>;
};
&eth0 {
status = "okay";
phy-handle = <&swphy4>;
mtd-mac-address = <&info 0x8>;
};