openwrt/target/linux/realtek/dts-5.10/rtl8380_d-link_dgs-1210-10mp-f.dts
Daniel Groth a911f63df9 realtek: dgs-1210-10mp: update sfp phy-handle
Adjust the wrong phy-handle definitions for the sfp ports so that they
match the correct switch ports.

Fixes: 89eb8b50d1 ("realtek: dgs-1210-10mp: add full sfp description")
Signed-off-by: Daniel Groth <flygarn12@gmail.com>
2023-01-28 21:01:29 +01:00

141 lines
2.7 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "rtl838x.dtsi"
#include "rtl83xx_d-link_dgs-1210_common.dtsi"
#include "rtl83xx_d-link_dgs-1210_gpio.dtsi"
/ {
compatible = "d-link,dgs-1210-10mp-f", "realtek,rtl8382-soc", "realtek,rtl838x-soc";
model = "D-Link DGS-1210-10MP F";
/* i2c for sfp port9 */
i2c0: i2c-gpio-0 {
compatible = "i2c-gpio";
sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpio1 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-gpio,delay-us = <2>;
#address-cells = <1>;
#size-cells = <0>;
};
sfp0: sfp-p9 {
compatible = "sff,sfp";
i2c-bus = <&i2c0>;
los-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
};
/* i2c for sfp port10 */
i2c1: i2c-gpio-1 {
compatible = "i2c-gpio";
sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpio1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-gpio,delay-us = <2>;
#address-cells = <1>;
#size-cells = <0>;
};
sfp1: sfp-p10 {
compatible = "sff,sfp";
i2c-bus = <&i2c1>;
los-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
};
};
&leds {
link_act {
label = "green:link_act";
gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
};
poe {
label = "green:poe";
gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
};
poe_max {
label = "yellow:poe_max";
gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
};
};
&keys {
mode {
label = "mode";
gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
linux,code = <KEY_LIGHTS_TOGGLE>;
};
};
&uart1 {
status = "okay";
};
&ethernet0 {
mdio: mdio-bus {
compatible = "realtek,rtl838x-mdio";
regmap = <&ethernet0>;
#address-cells = <1>;
#size-cells = <0>;
INTERNAL_PHY(8)
INTERNAL_PHY(9)
INTERNAL_PHY(10)
INTERNAL_PHY(11)
INTERNAL_PHY(12)
INTERNAL_PHY(13)
INTERNAL_PHY(14)
INTERNAL_PHY(15)
INTERNAL_PHY(24)
INTERNAL_PHY(26)
};
};
&switch0 {
ports {
#address-cells = <1>;
#size-cells = <0>;
SWITCH_PORT(8, 1, internal)
SWITCH_PORT(9, 2, internal)
SWITCH_PORT(10, 3, internal)
SWITCH_PORT(11, 4, internal)
SWITCH_PORT(12, 5, internal)
SWITCH_PORT(13, 6, internal)
SWITCH_PORT(14, 7, internal)
SWITCH_PORT(15, 8, internal)
port@24 {
reg = <24>;
label = "lan9";
phy-handle = <&phy24>;
phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sfp0>;
};
port@26 {
reg = <26>;
label = "lan10";
phy-handle = <&phy26>;
phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sfp1>;
};
port@28 {
ethernet = <&ethernet0>;
reg = <28>;
phy-mode = "internal";
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};