Weijie Gao abc7ed2c58 ath79: add support for D-Link DIR-859 A1 ... Hardware spec of DIR-859 A1: SoC: QCA9563 DRAM: 64MB DDR2 Flash: 16MB SPI-NOR Switch: QCA8337N WiFi 5.8GHz: QCA9880 USB is supported on the PCB but not connected. Flash instructions: 1. Upgrade the factory.bin through the factory web interface or the u-boot failsafe interface. The firmware will boot up correctly for the first time. Do not power off the device after OpenWrt has booted. Otherwise the u-boot will enter failsafe mode as the checksum of the firmware has been changed. 2. Upgrade the sysupgrade.bin in OpenWrt. After upgrading completes the u-boot won't complain about the firmware checksum and it's OK to use now. 3. If you powered off the device before upgrading the sysupgrade.bin, just upgrade the factory.bin through the u-boot failsafe interface and then goto step 2. Signed-off-by: Weijie Gao <hackpascal@gmail.com> [squash commits, use common seama recipes, sync factory image recipe with ramips version] Signed-off-by: Mathias Kresin <dev@kresin.me>		2018-12-30 20:08:13 +01:00
..
01_leds	ath79: add support for D-Link DIR-859 A1	2018-12-30 20:08:13 +01:00
02_network	ath79: add support for D-Link DIR-859 A1	2018-12-30 20:08:13 +01:00
03_gpio_switches	ath79: add d-link dir-825-c1 and dir-835-a1	2018-12-17 00:21:34 +01:00