openwrt/target/linux/ramips
INAGAKI Hiroshi b3ca1f30ef ramips: add support for ELECOM WRC-1750GST2
ELECOM WRC-1750GST2 is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on
MT7621A.

Specification:

- SoC		: MediaTek MT7621A
- RAM		: DDR3 256 MiB (NT5CC128M16JR-EK)
- Flash		: SPI-NOR 32 MiB (MX25L25645GMI-08G)
- WLAN		: 2.4/5 GHz 3T3R (2x MediaTek MT7615)
- Ethernet	: 10/100/1000 Mbps x5
  - Switch	: MediaTek MT7530 (SoC)
- LEDs/Keys	: 4x/6x (2x buttons, 1x slide-switch)
- UART		: through-hole on PCB
  - J4: 3.3V, GND, TX, RX, from ethernet port side
  - 57600n8
- Power		: 12 VDC, 1.5 A

Flash instruction using factory image:

1. Boot WRC-1750GST2 normally with "Router" mode
2. Access to "http://192.168.2.1/" and open firmware update page
   ("ファームウェア更新")
3. Select the OpenWrt factory image and click apply ("適用") button
4. Wait ~120 seconds to complete flashing

MAC addresses:

LAN	: 04:AB:18:xx:xx:23 (Factory, 0xE000 (hex))
WAN	: 04:AB:18:xx:xx:24 (Factory, 0xE006 (hex))
2.4GHz	: 04:AB:18:xx:xx:25 (Factory, 0x4    (hex))
5GHz	: 04:AB:18:xx:xx:26 (Factory, 0x8004 (hex))

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2021-03-21 22:45:20 +01:00
..
base-files/etc ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
dts ramips: add support for ELECOM WRC-1750GST2 2021-03-21 22:45:20 +01:00
files/drivers ramips: 5.10: port and refresh patches, ralink drv 2021-03-06 11:24:12 +01:00
image ramips: add support for ELECOM WRC-1750GST2 2021-03-21 22:45:20 +01:00
mt76x8 treewide: remove execute bit and shebang from board.d files 2021-03-06 11:30:06 +01:00
mt7620 treewide: remove execute bit and shebang from board.d files 2021-03-06 11:30:06 +01:00
mt7621 treewide: remove execute bit and shebang from board.d files 2021-03-06 11:30:06 +01:00
patches-5.4 kernel: bump 5.4 to 5.4.105 2021-03-13 17:06:35 +01:00
patches-5.10 ramips: move spi-nor-add-gd25q512 patch to generic 2021-03-19 01:25:26 +01:00
rt288x treewide: remove execute bit and shebang from board.d files 2021-03-06 11:30:06 +01:00
rt305x treewide: remove execute bit and shebang from board.d files 2021-03-06 11:30:06 +01:00
rt3883 treewide: remove execute bit and shebang from board.d files 2021-03-06 11:30:06 +01:00
Makefile ramips: 5.10: port and refresh patches, ralink drv 2021-03-06 11:24:12 +01:00
modules.mk ramips: rename mtk-hsdma to hsdma-mt7621 2021-03-04 23:43:02 -10:00