Birger Koblitz ab7f8146fd ramips: add support for Edimax EW-7478APC ... SoC: MediaTek MT7620a @ 580MHz RAM: 64M (Winbond W9751G6KB-25) FLASH: 8MB (Macronix) WiFi: SoC-integrated: MediaTek MT7620a bgn WiFi: MediaTek MT7612EN nac Switch: Mediatek MT7530W Gigabit Switch (4 x LAN, 1 x WAN) USB: Yes 1 x 2.0 (+ 1 x 2.0 unpopulated header) BTN: Reset/WPS LED: - Power (white) - Internet (blue) - Wifi (blue) - USB (blue) UART: UART is present as Pads with throughholes on the PCB. They are located in the lower right corner (GbE ports facing up) 3.3V - RX - GND - TX / 57600-8N1 3.3V is the square pad Installation ------------ Update the factory image via the web-interfaces (by default: http://edimax.setup) Signed-off-by: Birger Koblitz <mail@birger-koblitz.de> [merge conflicts in 01_leds and mt7620.mk, dts whitespace issues] Signed-off-by: Petr Štetiar <ynezz@true.cz>		2019-06-20 08:48:19 +02:00
..
01_leds	ramips: add support for Edimax EW-7478APC	2019-06-20 08:48:19 +02:00
02_network	ramips: add support for Edimax EW-7476RPC / EW-7478AC	2019-06-20 08:31:24 +02:00
03_gpio_switches	ramips: add support for Telco Electronics X1	2019-05-18 17:59:49 +02:00