mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 17:18:59 +00:00
d4c999bb89
backport from wireless-drivers-next, replacing some existing patches in our tree (marked with '=' are those which were already present): f483039cf51a rt2x00: use simple_read_from_buffer() =5c656c71b1bf rt2800: move usb specific txdone/txstatus routines to rt2800lib =0b0d556e0ebb rt2800mmio: use txdone/txstatus routines from lib =5022efb50f62 rt2x00: do not check for txstatus timeout every time on tasklet =adf26a356f13 rt2x00: use different txstatus timeouts when flushing =0240564430c0 rt2800: flush and txstatus rework for rt2800mmio 6eba8fd22352 rt2x00: rt2400pci: mark expected switch fall-through 10bb92217747 rt2x00: rt2500pci: mark expected switch fall-through 916e6bbcfcff rt2x00: rt2800lib: mark expected switch fall-throughs 641dd8068ecb rt2x00: rt61pci: mark expected switch fall-through 750afb08ca71 cross-tree: phase out dma_zalloc_coherent() =c2e28ef7711f rt2x00: reduce tx power to nominal level on RT6352 a4296994eb80 rt2x00: Work around a firmware bug with shared keys 2587791d5758 rt2x00: no need to check return value of debugfs_create functions pending on linux-wireless: rt2x00: remove unneeded check rt2x00: remove confusing AGC register rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band rt2800: enable TX_PIN_CFG_RFRX_EN only for MT7620 rt2800: comment and simplify AGC init for RT6352 rt2x00: do not print error when queue is full rt2800: partially restore old mmio txstatus behaviour rt2800: new flush implementation for SoC devices rt2800: move txstatus pending routine rt2800mmio: fetch tx status changes rt2800mmio: use timer and work for handling tx statuses timeouts rt2x00: remove last_nostatus_check rt2x00: remove not used entry field rt2x00mmio: remove legacy comment While at it also rename some existing patches now that there are separate folders with patches for each driver to make things a bit nicer to handle. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
33 lines
1.6 KiB
Diff
33 lines
1.6 KiB
Diff
From c2e28ef7711ffcb083474ee5f154264c6ec1ec07 Mon Sep 17 00:00:00 2001
|
|
From: =?UTF-8?q?Tomislav=20Po=C5=BEega?= <pozega.tomislav@gmail.com>
|
|
Date: Thu, 27 Dec 2018 15:05:25 +0100
|
|
Subject: [PATCH 12/28] rt2x00: reduce tx power to nominal level on RT6352
|
|
MIME-Version: 1.0
|
|
Content-Type: text/plain; charset=UTF-8
|
|
Content-Transfer-Encoding: 8bit
|
|
|
|
Current implementation of RT6352 support provides too high tx power
|
|
at least on iPA/eLNA devices. Reduce amplification of variable gain
|
|
amplifier by 6dB to match board target power of 17dBm.
|
|
Transmited signal strength with this patch is similar to that of
|
|
stock firmware or pandorabox firmware. Throughput measured with iperf
|
|
improves. Device tested: Xiaomi Miwifi Mini.
|
|
|
|
Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
|
|
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
---
|
|
drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 +-
|
|
1 file changed, 1 insertion(+), 1 deletion(-)
|
|
|
|
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
|
|
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
|
|
@@ -5477,7 +5477,7 @@ static int rt2800_init_registers(struct
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
|
|
rt2800_register_write(rt2x00dev, MIMO_PS_CFG, 0x00000002);
|
|
rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0x00150F0F);
|
|
- rt2800_register_write(rt2x00dev, TX_ALC_VGA3, 0x06060606);
|
|
+ rt2800_register_write(rt2x00dev, TX_ALC_VGA3, 0x00000000);
|
|
rt2800_register_write(rt2x00dev, TX0_BB_GAIN_ATTEN, 0x0);
|
|
rt2800_register_write(rt2x00dev, TX1_BB_GAIN_ATTEN, 0x0);
|
|
rt2800_register_write(rt2x00dev, TX0_RF_GAIN_ATTEN, 0x6C6C666C);
|