mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 08:21:14 +00:00
173d864253
Most of boards from MikroTik with AR9344 SoC (supported and un-supported) replicate the same schematic, so stack common device nodes to a single dtsi. ar9344_mikrotik_routerboard-16m-nor.dtsi: - remove include paragraph and wmac node, make it single nor flash node for others dts to include ar9344_mikrotik_routerboard-lhg-5nd.dts: - move all of the nodes to new file ar9344_mikrotik_routerboard.dtsi and leave only power, user and lan LEDs which differ from sxt-5nd-r2 and other yet unsupported devices ar9344_mikrotik_routerboard-sxt-5n.dtsi: - remove, it made no sense to keep it, as only ar9344_mikrotik_routerboard-sxt-5nd-r2.dts included this file and added only compatible and model ar9344_mikrotik_routerboard-sxt-5nd-r2.dts: - include ar9344_mikrotik_routerboard.dtsi - add nand gpio activating node, beeper, additional LEDs and flash chips which previously have been in ar9344_mikrotik_routerboard-sxt-5n.dtsi ar9344_mikrotik_routerboard.dtsi: - inherited most of the content from ar9344_mikrotik_routerboard-lhg-5nd.dts except three LEDs - add wmac node, removed from ar9344_mikrotik_routerboard-16m-nor.dtsi Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
115 lines
1.8 KiB
Plaintext
115 lines
1.8 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include "ar9344_mikrotik_routerboard.dtsi"
|
|
|
|
/ {
|
|
compatible = "mikrotik,routerboard-sxt-5nd-r2", "qca,ar9344";
|
|
model = "MikroTik RouterBOARD SXT 5nD r2 (SXT Lite5)";
|
|
|
|
gpio-export {
|
|
compatible = "gpio-export";
|
|
|
|
gpio_nand_power {
|
|
gpio-export,name = "sxt5n:power:nand";
|
|
gpio-export,output = <0>;
|
|
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
beeper {
|
|
compatible = "gpio-beeper";
|
|
gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
&leds {
|
|
power {
|
|
label = "green:power";
|
|
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
|
|
default-state = "on";
|
|
};
|
|
|
|
led_user: user {
|
|
label = "green:user";
|
|
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
&spi {
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <40000000>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "RouterBoot";
|
|
reg = <0x0 0x20000>;
|
|
compatible = "mikrotik,routerboot-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "bootloader1";
|
|
reg = <0x0 0x0>;
|
|
read-only;
|
|
};
|
|
|
|
hard_config {
|
|
read-only;
|
|
};
|
|
|
|
bios {
|
|
size = <0x1000>;
|
|
read-only;
|
|
};
|
|
|
|
soft_config {
|
|
};
|
|
|
|
partition@10000 {
|
|
label = "bootloader2";
|
|
reg = <0x10000 0x10000>;
|
|
read-only;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&nand {
|
|
status = "okay";
|
|
|
|
nand-ecc-mode = "soft";
|
|
qca,nand-swap-dma;
|
|
qca,nand-scan-fixup;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "booter";
|
|
reg = <0x0000000 0x0040000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@40000 {
|
|
label = "kernel";
|
|
reg = <0x0040000 0x03c0000>;
|
|
};
|
|
|
|
partition@400000 {
|
|
label = "ubi";
|
|
reg = <0x0400000 0x7c00000>;
|
|
};
|
|
};
|
|
};
|