mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 15:02:32 +00:00
eb20a1b8bb
The itian sq201, raidsonic ib-4220-b and storlink sl93512r can't boot from ext4. This is because the rootfstype in the device-tree bootargs is set to "squashfs,jffs2". (And ext4 was not designed for raw NOR flash chips). Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
243 lines
7.9 KiB
Makefile
243 lines
7.9 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0-only
|
|
#
|
|
# Copyright (C) 2009-2018 OpenWrt.org
|
|
|
|
include $(TOPDIR)/rules.mk
|
|
include $(INCLUDE_DIR)/image.mk
|
|
|
|
define Build/copy-kernel.bin
|
|
$(call locked,$(MAKE) -C copy-kernel CROSS_COMPILE=$(TARGET_CROSS) O=$(KDIR),gemini-copy-kernel.bin)
|
|
endef
|
|
|
|
# Cook a "WRGG" image, this board is apparently one in the D-Link
|
|
# WRGG family and uses the exact same firmware format as other
|
|
# D-Link devices.
|
|
define Build/dir685-image
|
|
mkwrggimg -i $@ \
|
|
-o $@.new \
|
|
-d /dev/mtdblock/1 \
|
|
-s wrgns01_dlwbr_dir685RBWW \
|
|
-v 'N/A' \
|
|
-m dir685 \
|
|
-B 96bb
|
|
|
|
mv $@.new $@
|
|
endef
|
|
|
|
# Padding added after the rootfs to an even 128k boundary
|
|
# as this is 128k eraseblocks flash.
|
|
define Build/dir685-pad-rootfs
|
|
$(STAGING_DIR_HOST)/bin/padjffs2 $(IMAGE_ROOTFS) -c 128 >>$@
|
|
endef
|
|
|
|
# Build D-Link DNS-313 images using the special header tool.
|
|
# rootfs.tgz and rd.tgz contains nothing, we only need them
|
|
# to satisfy the boot loader on the device. The zImage is
|
|
# the only real content.
|
|
define Build/dns313-images
|
|
mkdir -p $@.tmp/.boot
|
|
chmod 755 $@.tmp/.boot
|
|
|
|
echo "dummy" > $@.tmp/dummyfile
|
|
|
|
dns313-header $@.tmp/dummyfile \
|
|
$@.tmp/.boot/rootfs.tgz
|
|
dns313-header $@.tmp/dummyfile \
|
|
$@.tmp/.boot/rd.gz
|
|
dns313-header $(IMAGE_KERNEL) \
|
|
$@.tmp/.boot/zImage
|
|
|
|
rm $@.tmp/dummyfile
|
|
|
|
genext2fs --block-size $(BLOCKSIZE:%k=%Ki) \
|
|
--size-in-blocks $$((1024 * $(CONFIG_TARGET_KERNEL_PARTSIZE))) \
|
|
--squash-uids \
|
|
--root $@.tmp $@.tmp-boot
|
|
|
|
# The device firmware needs revision 1 of EXT2
|
|
tune2fs -O filetype $@.tmp-boot
|
|
e2fsck -pDf $@.tmp-boot > /dev/null
|
|
|
|
./dns313_gen_hdd_img.sh $@ $@.tmp-boot $(IMAGE_ROOTFS) \
|
|
$(CONFIG_TARGET_KERNEL_PARTSIZE) \
|
|
$(CONFIG_TARGET_ROOTFS_PARTSIZE)
|
|
|
|
rm -rf $@.tmp
|
|
endef
|
|
|
|
define Build/wiligear-image
|
|
$(STAGING_DIR_HOST)/bin/mkfwimage2 \
|
|
-m GEOS -f 0x30000000 -z \
|
|
-v $(1).v5.00.SL3512.OpenWrt.00000.000000.000000 \
|
|
-p Kernel:0x020000:0x100000:0:0:$(IMAGE_KERNEL) \
|
|
-p Ramdisk:0x120000:0x500000:0:0:$@ \
|
|
-o $@.new
|
|
|
|
mv $@.new $@
|
|
endef
|
|
|
|
# Create the default image format used by the StorLink reference design
|
|
# SL93512r, Raidsonic NAS4220B and Itian Square One SQ201
|
|
# with the squashfs and overlay inside the "application" partition.
|
|
#
|
|
# These devices have a hard-coded partition table that the boot loader
|
|
# constantly reflashes back, so we need to work around it like this:
|
|
#
|
|
# 0x000000120000-0x000000320000 : "Kern" - small copy routine and first
|
|
# part of the kernel goes here
|
|
# 0x000000320000-0x000000920000 : "Ramdisk" - second part of the kernel and
|
|
# some padding goes here
|
|
# 0x000000920000-0x000000f20000 : "Application" - rootfs goes here
|
|
define Build/storlink-default-images
|
|
mkdir -p $@.tmp
|
|
|
|
# "App" partition is the rootfs
|
|
mv $@ $@.tmp/hddapp.tgz
|
|
# 256 bytes copy routine
|
|
dd if=$(KDIR)/copy-kernel.bin of=$@.tmp/zImage
|
|
$(call Image/pad-to,$@.tmp/zImage,512)
|
|
# Copy first part of the kernel into zImage
|
|
dd if=$(IMAGE_KERNEL) of=$@.tmp/zImage bs=1 seek=512 count=2096640
|
|
# Put the rest of the kernel into the "ramdisk"
|
|
dd if=$(IMAGE_KERNEL) of=$@.tmp/rd.gz bs=1 skip=2096640 count=6144k conv=sync
|
|
cp ./ImageInfo-$(1) $@.tmp/ImageInfo
|
|
|
|
sed -i -e "s/DATESTR/`date +%Y%m%d $(if $(SOURCE_DATE_EPOCH),--date "@$(SOURCE_DATE_EPOCH)")`/g" $@.tmp/ImageInfo
|
|
|
|
(cd $@.tmp; tar --sort=name --owner=0 --group=0 --numeric-owner -czf $@ * \
|
|
$(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)"))
|
|
|
|
rm -rf $@.tmp
|
|
endef
|
|
|
|
# WBD-111 and WBD-222:
|
|
# work around the bootloader's bug with extra nops
|
|
# FIXME: is this really needed now that we no longer append the code
|
|
# to change the machine ID number? Needs testing on Wiliboard.
|
|
define Build/wbd-nops
|
|
mv $@ $@.tmp
|
|
echo -en "\x00\x00\xa0\xe1\x00\x00\xa0\xe1\x00\x00\xa0\xe1\x00\x00\xa0\xe1" > $@
|
|
cat $@.tmp >> $@
|
|
rm -f $@.tmp
|
|
endef
|
|
|
|
# All DTB files are prefixed with "gemini-"
|
|
define Device/Default
|
|
PROFILES := Default
|
|
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
|
|
KERNEL_NAME := zImage
|
|
KERNEL := kernel-bin | append-dtb
|
|
BLOCKSIZE := 128k
|
|
endef
|
|
|
|
# A reasonable set of default packages handling the NAS type
|
|
# of devices out of the box (former NAS42x0 IcyBox defaults)
|
|
GEMINI_NAS_PACKAGES := $(DEFAULT_PACKAGES.nas) \
|
|
kmod-md-mod kmod-md-linear kmod-md-multipath \
|
|
kmod-md-raid0 kmod-md-raid1 kmod-md-raid10 kmod-md-raid456 \
|
|
kmod-fs-btrfs kmod-fs-cifs kmod-fs-nfs \
|
|
kmod-fs-nfsd kmod-fs-ntfs kmod-fs-reiserfs kmod-fs-vfat \
|
|
kmod-nls-utf8 kmod-usb-storage-extras kmod-hwmon-drivetemp \
|
|
cfdisk e2fsprogs badblocks \
|
|
partx-utils
|
|
|
|
# The DIR-685 flash layout is kernel in WRGG format, padded and followed
|
|
# by the appended rootfs followed by some reasonable JFFS padding, the
|
|
# remainder will be used by JFFS2 through overlayfs.
|
|
#
|
|
# - For the factory image, the WRGG image includes the rootfs so that the
|
|
# default firmware will flash it properly as all it knows is WRGG format.
|
|
# - For the sysupgrade, we do not include the rootfs in the kernel image
|
|
# so it is not needelessly tossed into the RAM by the boot loader.
|
|
# This will be flashed from OpenWrt userland anyways so we only need
|
|
# the minimum to make the boot loader happy.
|
|
define Device/dlink_dir-685
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DIR-685 Xtreme N Storage Router
|
|
DEVICE_DTS := gemini-dlink-dir-685
|
|
DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES) \
|
|
kmod-rt2800-pci
|
|
IMAGES := factory.bin sysupgrade.bin
|
|
# Pad to 128k erase blocks with 160 bytes WRGG header
|
|
IMAGE/factory.bin := append-kernel | pad-offset 128k 160 | append-rootfs | dir685-pad-rootfs | dir685-image
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-offset 128k 160 | dir685-image | append-rootfs | dir685-pad-rootfs | append-metadata
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-685
|
|
|
|
define Device/dlink_dns-313
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DNS-313 1-Bay Network Storage Enclosure
|
|
DEVICE_DTS := gemini-dlink-dns-313
|
|
DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES)
|
|
BLOCKSIZE := 1k
|
|
FILESYSTEMS := ext4
|
|
IMAGES := factory.bin.gz
|
|
IMAGE/factory.bin.gz := dns313-images | gzip
|
|
endef
|
|
TARGET_DEVICES += dlink_dns-313
|
|
|
|
# Default images setup used by the StorLink reference designs
|
|
define Device/storlink-reference
|
|
COMPILE := copy-kernel-$(1).bin
|
|
COMPILE/copy-kernel-$(1).bin := copy-kernel.bin
|
|
IMAGES := factory.bin
|
|
FILESYSTEMS := squashfs
|
|
IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 6144k | \
|
|
storlink-default-images $(1)
|
|
DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES)
|
|
endef
|
|
|
|
define Device/itian_sq201
|
|
$(Device/storlink-reference)
|
|
DEVICE_VENDOR := ITian
|
|
DEVICE_MODEL := Square One SQ201
|
|
DEVICE_DTS := gemini-sq201
|
|
DEVICE_PACKAGES += kmod-rt61-pci kmod-usb2-pci
|
|
endef
|
|
TARGET_DEVICES += itian_sq201
|
|
|
|
define Device/raidsonic_ib-4220-b
|
|
$(Device/storlink-reference)
|
|
DEVICE_VENDOR := Raidsonic
|
|
DEVICE_MODEL := NAS IB-4220-B
|
|
DEVICE_DTS := gemini-nas4220b
|
|
endef
|
|
TARGET_DEVICES += raidsonic_ib-4220-b
|
|
|
|
define Device/storlink_sl93512r
|
|
$(Device/storlink-reference)
|
|
DEVICE_VENDOR := StorLink
|
|
DEVICE_MODEL := SL93512r
|
|
DEVICE_DTS := gemini-sl93512r
|
|
endef
|
|
TARGET_DEVICES += storlink_sl93512r
|
|
|
|
|
|
# The wiliboard images need some changes to be functional and buildable.
|
|
#
|
|
# The dts would need to use the ecoscentric,redboot-fis-partitions partition
|
|
# parser to get the correct partition offsets and size.
|
|
#
|
|
# The mkfwimage2 call need to be adjusted to reflect the real size of kernel
|
|
# and rootfs. It is expected that the OEM firmware adjusts the on flash
|
|
# partition table with the values defined in the image header.
|
|
define Device/wiliboard_wbd111
|
|
DEVICE_VENDOR := Wiliboard
|
|
DEVICE_MODEL := WBD-111
|
|
DEVICE_DTS := gemini-wbd111
|
|
KERNEL := kernel-bin | append-dtb | wbd-nops
|
|
IMAGES := factory.bin
|
|
IMAGE/factory.bin := append-rootfs | pad-rootfs | wiligear-image "WILI-S.WILIBOARD"
|
|
endef
|
|
|
|
define Device/wiliboard_wbd222
|
|
DEVICE_VENDOR := Wiliboard
|
|
DEVICE_MODEL := WBD-222
|
|
DEVICE_DTS := gemini-wbd222
|
|
KERNEL := kernel-bin | append-dtb | wbd-nops
|
|
IMAGES := factory.bin
|
|
IMAGE/factory.bin := append-rootfs | pad-rootfs | wiligear-image "WILI-S.WBD222"
|
|
endef
|
|
|
|
$(eval $(call BuildImage))
|