openwrt/target/linux
Daniel Golle aa4a33ac62 ath79: add support for Teltonika RUT955 H7V3C0
This board was previously supported in ar71xx as 'RUT9XX'. The
difference between that and the other RUT955 board already supported in
ath79 is that instead of the SPI shift registers driving the LEDs and
digital outputs that model got an I2C GPIO expander instead.

To support LEDs during early boot and interrupt-driven digital inputs,
I2C support as well as support for PCA953x has to be built-in and
cannot be kernel modules, hence select those symbols for ath79/generic.

Specification:

- 550/400/200 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 4x 10/100 Mbps Ethernet, with passive PoE support on LAN1
- 2T2R 2,4 GHz (AR9344)
- built-in 4G/3G module (example: Quectel EC-25EU)
- internal microSD slot (spi-mmc, buggy and disabled for now)
- RS232 on D-Sub9 port (Cypress ACM via USB, /dev/ttyACM0)
- RS422/RS485 (AR934x high speed UART, /dev/ttyATH1)
- analog 0-24V input (MCP3221)
- various digital inputs and outputs incl. a relay
- 11x LED (4 are driven by AR9344, 7 by PCA9539)
- 2x miniSIM slot (can be swapped via GPIO)
- 2x RP-SMA/F (Wi-Fi), 3x SMA/F (2x WWAN, GPS)
- 1x button (reset)
- DC jack for main power input (9-30 V)
- debugging UART available on PCB edge connector

Serial console (/dev/ttyS0) pinout:

- RX: pin1 (square) on top side of the main PCB (AR9344 is on top)
- TX: pin1 (square) on bottom side

Flash instruction:

Vendor firmware is based on OpenWrt CC release. Use the "factory" image
directly in GUI (make sure to uncheck "keep settings") or in U-Boot web
based recovery. To avoid any problems, make sure to first update vendor
firmware to latest version - "factory" image was successfully tested on
device running "RUT9XX_R_00.06.051" firmware and U-Boot "3.0.1".

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-04-29 21:32:35 +01:00
..
apm821xx kernel: bump 4.19 to 4.19.115 2020-04-16 13:23:11 +02:00
ar71xx kernel: bump 4.14 to 4.14.176 2020-04-16 13:23:11 +02:00
arc770 treewide: remove maintainer variable from targets 2020-03-16 22:21:45 +01:00
archs38 archs38: switch to kernel 5.4 by default 2020-03-29 16:23:57 +02:00
armvirt kernel: remove non-existant symbols 2020-04-13 22:40:19 +02:00
at91 treewide: remove maintainer variable from targets 2020-03-16 22:21:45 +01:00
ath25 treewide: remove maintainer variable from targets 2020-03-16 22:21:45 +01:00
ath79 ath79: add support for Teltonika RUT955 H7V3C0 2020-04-29 21:32:35 +01:00
bcm27xx kernel: bump 5.4 to 5.4.35 2020-04-25 13:22:28 +02:00
bcm47xx kernel: bump 5.4 to 5.4.33 2020-04-17 15:18:12 +02:00
bcm53xx bcm53xx: 5.4: enable NAND 2020-04-26 21:45:41 +02:00
bcm63xx bcm63xx: switch to 5.4 kernel 2020-04-18 20:58:38 +02:00
cns3xxx cns3xx: remove support for kernel 4.14 2020-04-12 13:43:52 +02:00
gemini gemini: Refine package list 2020-04-09 00:12:46 +02:00
generic kernel: backport fix for non-regular inodes on f2fs 2020-04-26 21:45:41 +02:00
imx6 imx6: add back perf monitor related config symbol 2020-04-25 13:22:28 +02:00
ipq40xx ipq40xx: fix alphabetical order in 02_network 2020-04-24 20:03:41 +02:00
ipq806x ipq806x: switch to 5.4 kernel 2020-04-09 00:12:46 +02:00
ipq807x treewide: remove maintainer variable from targets 2020-03-16 22:21:45 +01:00
kirkwood kirkwood: disable image for Linksys EA3500 (Audi) 2020-04-29 18:04:16 +02:00
lantiq lantiq/fritz 7312: set maximum speed to 100 mbit 2020-04-21 00:01:49 +02:00
layerscape kernel: bump 4.14 to 4.14.176 2020-04-16 13:23:11 +02:00
malta malta: Remove kernel 4.14 support 2020-03-12 09:28:23 +01:00
mediatek mediatek: fix compile error caused by upstreamed mtk_m32 function 2020-04-27 22:32:07 +02:00
mpc85xx treewide: Don't diverge from upstream default HZ settings on 4.19 2020-03-29 17:27:54 +01:00
mvebu mvebu: tidy up support for GL.iNet GL-MV1000 2020-04-27 00:25:12 +02:00
mxs kernel: bump 5.4 to 5.4.28 2020-03-28 13:03:02 +01:00
octeon octeon: use kernel version 5.4 for testing 2020-04-23 18:38:54 +02:00
octeontx kernel: bump 5.4 to 5.4.33 2020-04-17 15:18:12 +02:00
omap omap: remove support for kernel 4.14 2020-04-28 01:10:48 +02:00
oxnas oxnas: move service file to correct place 2020-04-26 21:05:15 +02:00
pistachio treewide: remove maintainer variable from targets 2020-03-16 22:21:45 +01:00
ramips Revert "ramips: explicitly disable built-in switch for lan-only devices" 2020-04-28 16:53:29 +02:00
rb532 treewide: remove maintainer variable from targets 2020-03-16 22:21:45 +01:00
rockchip rockchip: add support for Pine64 RockPro64 2020-04-20 16:37:56 +02:00
samsung treewide: remove maintainer variable from targets 2020-03-16 22:21:45 +01:00
sunxi kernel: bump 5.4 to 5.4.28 2020-03-28 13:03:02 +01:00
tegra tegra: correct cpu subtype 2020-03-28 22:58:36 +01:00
uml treewide: Remove self from MAINTAINER entries 2019-12-23 13:18:04 -08:00
x86 x86: fix unusable squashfs images by adding missing padding 2020-04-26 12:53:27 +02:00
zynq zynq: switch to kernel 5.4 2020-03-17 00:51:48 +01:00
Makefile