Sander Vanheule 46dec9952b firmware-utils: tplink-safeloader: set EAP235-Wall v1 soft-version ... Starting with v3 of the vendor firmware for the TP-Link EAP235-Wall v1, downgrades to firmware versions below v3 as not allowed. Since OpenWrt uses version 0.0.0 as a default, this causes the factory install to fail on devices with a recent firmware. This failure is associated by the following message on the device's serial console: EAP235/230-Wall forbid fw reverted from 3.x.x to lower version! Vendor firmware (v3) also uses build and release numbers to compare images, so identical version numbers are very unlikely to cause issues. Bump the firmware version to 3.0.0 to ensure users can install OpenWrt on their devices. Reported-by: Colton Conor <colton.conor@gmail.com> Tested-by: Colton Conor <colton.conor@gmail.com> Signed-off-by: Sander Vanheule <sander@svanheule.net>		2021-09-13 18:36:15 +02:00
..
src	firmware-utils: tplink-safeloader: set EAP235-Wall v1 soft-version	2021-09-13 18:36:15 +02:00
Makefile	firmware-utils: tplink-safeloader: improve soft-version customisation	2021-09-13 18:36:15 +02:00