openwrt/package/boot
Maximilian Weinmann 8a0746955d ramips: Add support for Beeline SmartBox TURBO+
This adds support for Beeline Smart Box TURBO+ (Serсomm S3 CQR) router.

Device specification
--------------------
SoC Type: MediaTek MT7621AT (880 MHz, 2 cores)
RAM (Nanya NT5CC64M16GP): 128 MiB
Flash (Macronix MX30LF1G18AC): 128 MiB
Wireless 2.4 GHz (MT7603EN): b/g/n, 2x2
Wireless 5 GHz (MT7615N): a/n/ac, 4x4
Ethernet: 5 ports - 5×GbE (WAN, LAN1-4)
USB ports: 1xUSB3.0
Buttons: 2 button (reset, wps)
LEDs: Red, Green, Blue
Zigbee (EFR32MG1B232GG): 3.0
Stock bootloader: U-Boot 1.1.3
Power: 12 VDC, 1.5 A

Installation (fw 2.0.9)
-----------------------
1.  Login to the web interface under SuperUser (root) credentials.
    Password: SDXXXXXXXXXX, where SDXXXXXXXXXX is serial number of the
    device written on the backplate stick.
2.  Navigate to Setting -> WAN. Add:
       Name - WAN1
       Connection Type - Static
       IP Address - 172.16.0.1
       Netmask - 255.255.255.0
    Save -> Apply. Set default: WAN1
3.  Enable SSH and HTTP on WAN. Setting -> Remote control. Add:
       Protocol - SSH
       Port - 22
       IP Address - 172.16.0.1
       Netmask - 255.255.255.0
       WAN Interface - WAN1
    Save ->Apply
    Add:
       Protocol - HTTP
       Port - 80
       IP Address - 172.16.0.1
       Netmask - 255.255.255.0
       WAN interface - WAN1
    Save -> Apply
4.  Set up your PC ethernet:
       Connection Type - Static
       IP Address - 172.16.0.2
       Netmask - 255.255.255.0
       Gateway - 172.16.0.1
5.  Connect PC using ethernet cable to the WAN port of the router
6.  Connect to the router using SSH shell under SuperUser account
7.  Make a mtd backup (optional, see related section)
8.  Change bootflag to Sercomm1 and reboot:
        printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3
        reboot
9.  Login to the router web interface under admin account
10. Remove dots from the OpenWrt factory image filename
11. Update firmware via web using OpenWrt factory image

Revert to stock
---------------
Change bootflag to Sercomm1 in OpenWrt CLI and then reboot:
   printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3

mtd backup
----------
1. Set up a tftp server (e.g. tftpd64 for windows)
2. Connect to a router using SSH shell and run the following commands:
      cd /tmp
      for i in 0 1 2 3 4 5 6 7 8 9 10; do nanddump -f mtd$i /dev/mtd$i; \
      tftp -l mtd$i -p 172.16.0.2; md5sum mtd$i >> mtd.md5; rm mtd$i; done
      tftp -l mtd.md5 -p 171.16.0.2

Recovery
--------
Use sercomm-recovery tool.
Link: https://github.com/danitool/sercomm-recovery

MAC Addresses (fw 2.0.9)
------------------------
+-----+------------+---------+
| use | address    | example |
+-----+------------+---------+
| LAN | label      | *:e8    |
| WAN | label + 1  | *:e9    |
| 2g  | label + 4  | *:ec    |
| 5g  | label + 5  | *:ed    |
+-----+------------+---------+
The label MAC address was found in Factory 0x21000

Factory image format
--------------------
+---+-------------------+-------------+--------------------+
| # | Offset            | Size        | Description        |
+---+-------------------+-------------+--------------------+
| 1 | 0x0               | 0x200       | Tag Header Factory |
| 2 | 0x200             | 0x100       | Tag Header Kernel1 |
| 3 | 0x300             | 0x100       | Tag Header Kernel2 |
| 4 | 0x400             | SIZE_KERNEL | Kernel             |
| 5 | 0x400+SIZE_KERNEL | SIZE_ROOTFS | RootFS(UBI)        |
+---+-------------------+-------------+--------------------+

Co-authored-by: Mikhail Zhilkin <csharper2005@gmail.com>
Signed-off-by: Maximilian Weinmann <x1@disroot.org>
(cherry picked from commit 8fcfb21b16)
2023-06-17 12:59:37 +02:00
..
arm-trusted-firmware-bcm63xx treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
arm-trusted-firmware-mediatek arm-trusted-firmware-mediatek: add build for MT7981 DDR3 2023-05-29 13:04:14 +01:00
arm-trusted-firmware-mvebu treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
arm-trusted-firmware-rockchip atf-rockchip: update to 2.3 2020-07-28 15:52:44 +02:00
arm-trusted-firmware-sunxi arm-trusted-firmware-sunxi: bump to 2.8 2023-04-01 01:22:19 +03:00
arm-trusted-firmware-tools arm-trusted-firmware-tools: update to v2.7 2022-09-07 04:22:40 +01:00
at91bootstrap at91bootstrap: use sdmmc0 as booting media for sama5d27_som1_ek 2022-09-02 20:43:51 +02:00
fconfig treewide: unify OpenWrt hosted source via @OPENWRT 2021-02-05 12:00:24 -10:00
grub2 grub2: change armvirt reference to armsr 2023-06-13 14:14:31 +02:00
imx-bootlets imx-bootlets: refresh patches 2021-02-24 16:15:02 +01:00
kexec-tools treewide: add support for "gc-sections" in PKG_BUILD_FLAGS 2023-03-21 18:28:22 +01:00
kobs-ng kobs-ng: update dependencies after 'imx6' -> 'imx' rename 2021-11-03 12:45:40 +01:00
mt7623n-preloader mt7623n-preloader: remove mt7622-preloader 2021-02-28 04:12:23 +00:00
opensbi opensbi: add package for RISC-V 2023-06-14 09:22:08 +02:00
tfa-layerscape tfa-layerscape: fix fiptool's build 2023-05-20 23:20:48 +02:00
uboot-armsr uboot-armsr: add support for QEMU armv7/armv8 2023-06-13 14:15:22 +02:00
uboot-at91 treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-bcm4908 treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-envtools ramips: Add support for Beeline SmartBox TURBO+ 2023-06-17 12:59:37 +02:00
uboot-fritz4040 treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-imx treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-kirkwood treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-lantiq treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-layerscape package: layerscape: change loadaddr address 2023-05-29 14:17:52 +02:00
uboot-mediatek uboot-mediatek: adapt BPi-R3 and BPi-R64 to new device tree overlay 2023-06-09 19:23:03 +01:00
uboot-mvebu treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-mxs treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-omap treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-oxnas treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-rockchip uboot-rockchip: add Orange Pi R1 Plus LTS support 2023-06-09 13:15:19 +02:00
uboot-sifiveu uboot-sifiveu: add bootloader package for SiFive Ux40 boards 2023-06-14 09:22:08 +02:00
uboot-sunxi uboot-sunxi: update support for FriendlyARM ZeroPI 2023-04-10 13:50:58 +02:00
uboot-tegra treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-zynq uboot-zynq: build with zynq generic subtarget 2022-12-25 11:55:53 +01:00