openwrt/target/linux/ramips/dts/mt7628an_tplink_tl-wa801nd-v5.dts
Jan Alexander 20eb45da4f ramips: use tpt DTS trigger for TP-Link TL-MR3020 v3 and TL-WA801ND v5
This converts the TP-Link TL-MR3020v3 board to use the WLAN throughput
LED trigger in order to react to all VAPs.

It also moves the WLAN trigger config of the TP-Link TL-WA801NDv5 to the
DTS and merges the now identical LAN LED configs.

Verified these changes on a TL-MR3020v3.

Signed-off-by: Jan Alexander <jan@nalx.net>
[changed commit title and extended commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-01-30 13:09:12 +01:00

73 lines
1.3 KiB
Plaintext

/dts-v1/;
#include "mt7628an_tplink_8m.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "tplink,tl-wa801nd-v5", "mediatek,mt7628an-soc";
model = "TP-Link TL-WA801ND v5";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
led_power: power {
label = "tl-wa801nd-v5:green:power";
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
};
lan {
label = "tl-wa801nd-v5:green:lan";
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
};
wlan {
label = "tl-wa801nd-v5:green:wlan";
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wps_red {
label = "tl-wa801nd-v5:red:wps";
gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
};
wps_green {
label = "tl-wa801nd-v5:green:wps";
gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
};
};
};
&state_default {
gpio {
ralink,group = "p0led_an", "p1led_an", "perst", "refclk",
"uart1", "wdt", "wled_an";
ralink,function = "gpio";
};
};