mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-26 00:41:17 +00:00
e4ce3109f2
The node pinctrl0 is already set up in the SOC DTSI files, but defined again as member of pinctrl in most of the device DTS(I) files. This patch removes this redundancy for the entire ramips target. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
160 lines
2.6 KiB
Plaintext
160 lines
2.6 KiB
Plaintext
/dts-v1/;
|
|
|
|
#include "mt7621.dtsi"
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
compatible = "mikrotik,rbm11g", "mediatek,mt7621-soc";
|
|
model = "MikroTik RouterBOARD M11G";
|
|
|
|
aliases {
|
|
led-boot = &led_usr;
|
|
led-failsafe = &led_usr;
|
|
led-running = &led_usr;
|
|
led-upgrade = &led_usr;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS0,115200";
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led_usr: usr {
|
|
label = "rbm11g:green:usr";
|
|
gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
rssi0 {
|
|
label = "rbm11g:green:rssi0";
|
|
gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
rssi1 {
|
|
label = "rbm11g:green:rssi1";
|
|
gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
rssi2 {
|
|
label = "rbm11g:green:rssi2";
|
|
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
rssi3 {
|
|
label = "rbm11g:green:rssi3";
|
|
gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
rssi4 {
|
|
label = "rbm11g:green:rssi4";
|
|
gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
res {
|
|
label = "reset";
|
|
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
};
|
|
|
|
pcie0_vcc_reg {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pcie0_vcc";
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
|
|
&spi0 {
|
|
status = "okay";
|
|
|
|
w25q128@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
// XXX empiric value to obtain actual 10MHz SCK at the chip
|
|
spi-max-frequency = <3125000>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "RouterBoot";
|
|
reg = <0x0 0x40000>;
|
|
read-only;
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "bootloader1";
|
|
reg = <0x0 0xf000>;
|
|
read-only;
|
|
};
|
|
|
|
hard_config: partition@f000 {
|
|
label = "hard_config";
|
|
reg = <0xf000 0x1000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@10000 {
|
|
label = "bootloader2";
|
|
reg = <0x10000 0xf000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@20000 {
|
|
label = "soft_config";
|
|
reg = <0x20000 0x1000>;
|
|
};
|
|
|
|
partition@30000 {
|
|
label = "bios";
|
|
reg = <0x30000 0x1000>;
|
|
read-only;
|
|
};
|
|
};
|
|
|
|
partition@40000 {
|
|
compatible = "mikrotik,minor";
|
|
label = "firmware";
|
|
reg = <0x040000 0xFC0000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
ðernet {
|
|
mtd-mac-address = <&hard_config 0x0010>;
|
|
mtd-mac-address-increment = <1>;
|
|
};
|
|
|
|
&state_default {
|
|
gpio {
|
|
ralink,group = "uart2", "wdt", "rgmii2";
|
|
ralink,function = "gpio";
|
|
};
|
|
};
|
|
|
|
&i2c {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie {
|
|
status = "okay";
|
|
};
|