openwrt/target/linux/lantiq/dts/WBMR.dts
Luka Perkov da7590cd21 lantiq: fix formating in .dts files
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 36882
2013-06-08 11:36:07 +00:00

169 lines
2.6 KiB
Plaintext

/dts-v1/;
/include/ "ar9.dtsi"
/ {
model = "WBMR - Buffalo WBMR-HP-G300H";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
};
memory@0 {
reg = <0x0 0x4000000>;
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x40000>;
read-only;
};
partition@40000 {
label = "uboot_env";
reg = <0x40000 0x20000>;
read-only;
};
partition@20000 {
label = "linux";
reg = <0x60000 0x1f20000>;
};
partition@0x1fc0000 {
label = "board";
reg = <0x1fc0000 0x20000>;
read-only;
};
partition@0x1fe0000 {
label = "calibration";
reg = <0x1fe0000 0x20000>;
read-only;
};
};
mac_addr {
compatible = "lantiq,eth-mac";
reg = <0 0x1fd0024 0x6>;
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
pci-in {
lantiq,groups = "req1";
lantiq,output = <0>;
lantiq,open-drain = <1>;
lantiq,pull = <2>;
};
pci-out {
lantiq,groups = "gnt1";
lantiq,output = <1>;
lantiq,pull = <0>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,pull = <0>;
lantiq,output = <1>;
};
};
};
etop@E180000 {
phy-mode = "rgmii";
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 36 0>;
};
pci@E105400 {
status = "okay";
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
wps {
label = "wps";
gpios = <&gpio 0 1>;
linux,code = <0x211>;
};
reset {
label = "reset";
gpios = <&gpio 37 1>;
linux,code = <0x198>;
};
eject {
label = "eject";
gpios = <&gpio 34 1>;
linux,code = <0xf7>;
};
movie {
label = "movie";
gpios = <&gpio 22 1>;
linux,code = <0x109>;
};
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "power";
gpios = <&gpio 1 1>;
};
power2 {
label = "power2";
gpios = <&gpio 5 1>;
};
security {
label = "security";
gpios = <&gpio 14 1>;
};
wifi {
label = "wifi";
gpios = <&gpio 15 1>;
};
dsl {
label = "dsl";
gpios = <&gpio 16 1>;
};
online {
label = "online";
gpios = <&gpio 17 1>;
};
online2 {
label = "online2";
gpios = <&gpio 18 1>;
};
movie {
label = "movie";
gpios = <&gpio 20 1>;
};
usb {
label = "usb";
gpios = <&gpio 28 1>;
default-state = "on";
};
};
};