mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-28 01:28:59 +00:00
bb907d8d44
PMD Global Transmit Disable bit should be cleared for normal operation. This should be HW default, however I found that on Asus RT-AX89X that uses AQR113C PHY and firmware 5.4 this bit is set by default. With this bit set the AQR cannot achieve a link with its link-partner and it took me multiple hours of digging through the vendor GPL source to find this out, so lets always clear this bit during .config_init() to avoid a situation like this in the future. aqr107_wait_processor_intensive_op() is moved up because datasheet notes that any changes to this bit are processor intensive. This is a modified version of patch that got merged upstream as AQR113C has a separate config_init() upstream. Link: https://github.com/openwrt/openwrt/pull/15840 Signed-off-by: Robert Marko <robimarko@gmail.com>
104 lines
3.3 KiB
Diff
104 lines
3.3 KiB
Diff
From cffac22c9215f1883d3848c788f9b03656dced27 Mon Sep 17 00:00:00 2001
|
|
From: Robert Marko <robimarko@gmail.com>
|
|
Date: Sun, 11 Feb 2024 18:39:19 +0100
|
|
Subject: [PATCH] net: phy: aquantia: clear PMD Global Transmit Disable bit
|
|
during init
|
|
|
|
PMD Global Transmit Disable bit should be cleared for normal operation.
|
|
This should be HW default, however I found that on Asus RT-AX89X that uses
|
|
AQR113C PHY and firmware 5.4 this bit is set by default.
|
|
|
|
With this bit set the AQR cannot achieve a link with its link-partner and
|
|
it took me multiple hours of digging through the vendor GPL source to find
|
|
this out, so lets always clear this bit during .config_init() to avoid a
|
|
situation like this in the future.
|
|
|
|
aqr107_wait_processor_intensive_op() is moved up because datasheet notes
|
|
that any changes to this bit are processor intensive.
|
|
|
|
Signed-off-by: Robert Marko <robimarko@gmail.com>
|
|
---
|
|
drivers/net/phy/aquantia/aquantia_main.c | 57 ++++++++++++++----------
|
|
1 file changed, 33 insertions(+), 24 deletions(-)
|
|
|
|
--- a/drivers/net/phy/aquantia/aquantia_main.c
|
|
+++ b/drivers/net/phy/aquantia/aquantia_main.c
|
|
@@ -473,6 +473,30 @@ static void aqr107_chip_info(struct phy_
|
|
fw_major, fw_minor, build_id, prov_id);
|
|
}
|
|
|
|
+static int aqr107_wait_processor_intensive_op(struct phy_device *phydev)
|
|
+{
|
|
+ int val, err;
|
|
+
|
|
+ /* The datasheet notes to wait at least 1ms after issuing a
|
|
+ * processor intensive operation before checking.
|
|
+ * We cannot use the 'sleep_before_read' parameter of read_poll_timeout
|
|
+ * because that just determines the maximum time slept, not the minimum.
|
|
+ */
|
|
+ usleep_range(1000, 5000);
|
|
+
|
|
+ err = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1,
|
|
+ VEND1_GLOBAL_GEN_STAT2, val,
|
|
+ !(val & VEND1_GLOBAL_GEN_STAT2_OP_IN_PROG),
|
|
+ AQR107_OP_IN_PROG_SLEEP,
|
|
+ AQR107_OP_IN_PROG_TIMEOUT, false);
|
|
+ if (err) {
|
|
+ phydev_err(phydev, "timeout: processor-intensive MDIO operation\n");
|
|
+ return err;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
static int aqr107_config_init(struct phy_device *phydev)
|
|
{
|
|
struct aqr107_priv *priv = phydev->priv;
|
|
@@ -498,6 +522,15 @@ static int aqr107_config_init(struct phy
|
|
if (!ret)
|
|
aqr107_chip_info(phydev);
|
|
|
|
+ ret = phy_clear_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_TXDIS,
|
|
+ MDIO_PMD_TXDIS_GLOBAL);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
+ ret = aqr107_wait_processor_intensive_op(phydev);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
ret = aqr107_set_downshift(phydev, MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT);
|
|
if (ret)
|
|
return ret;
|
|
@@ -580,30 +613,6 @@ static void aqr107_link_change_notify(st
|
|
phydev_info(phydev, "Aquantia 1000Base-T2 mode active\n");
|
|
}
|
|
|
|
-static int aqr107_wait_processor_intensive_op(struct phy_device *phydev)
|
|
-{
|
|
- int val, err;
|
|
-
|
|
- /* The datasheet notes to wait at least 1ms after issuing a
|
|
- * processor intensive operation before checking.
|
|
- * We cannot use the 'sleep_before_read' parameter of read_poll_timeout
|
|
- * because that just determines the maximum time slept, not the minimum.
|
|
- */
|
|
- usleep_range(1000, 5000);
|
|
-
|
|
- err = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1,
|
|
- VEND1_GLOBAL_GEN_STAT2, val,
|
|
- !(val & VEND1_GLOBAL_GEN_STAT2_OP_IN_PROG),
|
|
- AQR107_OP_IN_PROG_SLEEP,
|
|
- AQR107_OP_IN_PROG_TIMEOUT, false);
|
|
- if (err) {
|
|
- phydev_err(phydev, "timeout: processor-intensive MDIO operation\n");
|
|
- return err;
|
|
- }
|
|
-
|
|
- return 0;
|
|
-}
|
|
-
|
|
static int aqr107_get_rate_matching(struct phy_device *phydev,
|
|
phy_interface_t iface)
|
|
{
|