openwrt/package/boot/uboot-mediatek/patches/002-0010-serial-mtk-add-support-for-using-dynamic-baud-clock-.patch
Daniel Golle c09eb08dad uboot-mediatek: add support for MT798x platforms
Import pending patches to support the upcoming Filogic platforms.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-08-28 20:33:15 +01:00

203 lines
6.4 KiB
Diff

From 55ed87efb110d13fce6d1a7ee6cb04fac1a2c08a Mon Sep 17 00:00:00 2001
From: Weijie Gao <weijie.gao@mediatek.com>
Date: Wed, 27 Jul 2022 10:28:05 +0800
Subject: [PATCH 10/31] serial: mtk: add support for using dynamic baud clock
souce
The baud clock on some platform may change due to assigned-clock-parent
set in DT. In current flow the baud clock is only retrieved during probe
stage. If the parent of the source clock changes after probe stage, the
setbrg will set wrong baudrate.
To get the right clock rate, this patch records the baud clk struct to the
driver's priv, and changes the driver's flow to get the clock rate before
calling _mtk_serial_setbrg().
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
---
drivers/serial/serial_mtk.c | 80 ++++++++++++++++++++++---------------
1 file changed, 47 insertions(+), 33 deletions(-)
--- a/drivers/serial/serial_mtk.c
+++ b/drivers/serial/serial_mtk.c
@@ -10,6 +10,7 @@
#include <common.h>
#include <div64.h>
#include <dm.h>
+#include <dm/device_compat.h>
#include <errno.h>
#include <log.h>
#include <serial.h>
@@ -70,27 +71,37 @@ struct mtk_serial_regs {
#define BAUD_ALLOW_MAX(baud) ((baud) + (baud) * 3 / 100)
#define BAUD_ALLOW_MIX(baud) ((baud) - (baud) * 3 / 100)
+/* struct mtk_serial_priv - Structure holding all information used by the
+ * driver
+ * @regs: Register base of the serial port
+ * @clk: The baud clock device
+ * @fixed_clk_rate: Fallback fixed baud clock rate if baud clock
+ * device is not specified
+ * @force_highspeed: Force using high-speed mode
+ */
struct mtk_serial_priv {
struct mtk_serial_regs __iomem *regs;
- u32 clock;
+ struct clk clk;
+ u32 fixed_clk_rate;
bool force_highspeed;
};
-static void _mtk_serial_setbrg(struct mtk_serial_priv *priv, int baud)
+static void _mtk_serial_setbrg(struct mtk_serial_priv *priv, int baud,
+ uint clk_rate)
{
u32 quot, realbaud, samplecount = 1;
/* Special case for low baud clock */
- if (baud <= 115200 && priv->clock <= 12000000) {
+ if (baud <= 115200 && clk_rate == 12000000) {
writel(3, &priv->regs->highspeed);
- quot = DIV_ROUND_CLOSEST(priv->clock, 256 * baud);
+ quot = DIV_ROUND_CLOSEST(clk_rate, 256 * baud);
if (quot == 0)
quot = 1;
- samplecount = DIV_ROUND_CLOSEST(priv->clock, quot * baud);
+ samplecount = DIV_ROUND_CLOSEST(clk_rate, quot * baud);
- realbaud = priv->clock / samplecount / quot;
+ realbaud = clk_rate / samplecount / quot;
if (realbaud > BAUD_ALLOW_MAX(baud) ||
realbaud < BAUD_ALLOW_MIX(baud)) {
pr_info("baud %d can't be handled\n", baud);
@@ -104,7 +115,7 @@ static void _mtk_serial_setbrg(struct mt
if (baud <= 115200) {
writel(0, &priv->regs->highspeed);
- quot = DIV_ROUND_CLOSEST(priv->clock, 16 * baud);
+ quot = DIV_ROUND_CLOSEST(clk_rate, 16 * baud);
} else if (baud <= 576000) {
writel(2, &priv->regs->highspeed);
@@ -112,13 +123,13 @@ static void _mtk_serial_setbrg(struct mt
if ((baud == 500000) || (baud == 576000))
baud = 460800;
- quot = DIV_ROUND_UP(priv->clock, 4 * baud);
+ quot = DIV_ROUND_UP(clk_rate, 4 * baud);
} else {
use_hs3:
writel(3, &priv->regs->highspeed);
- quot = DIV_ROUND_UP(priv->clock, 256 * baud);
- samplecount = DIV_ROUND_CLOSEST(priv->clock, quot * baud);
+ quot = DIV_ROUND_UP(clk_rate, 256 * baud);
+ samplecount = DIV_ROUND_CLOSEST(clk_rate, quot * baud);
}
set_baud:
@@ -167,8 +178,13 @@ static int _mtk_serial_pending(struct mt
static int mtk_serial_setbrg(struct udevice *dev, int baudrate)
{
struct mtk_serial_priv *priv = dev_get_priv(dev);
+ u32 clk_rate;
+
+ clk_rate = clk_get_rate(&priv->clk);
+ if (IS_ERR_VALUE(clk_rate) || clk_rate == 0)
+ clk_rate = priv->fixed_clk_rate;
- _mtk_serial_setbrg(priv, baudrate);
+ _mtk_serial_setbrg(priv, baudrate, clk_rate);
return 0;
}
@@ -211,7 +227,6 @@ static int mtk_serial_of_to_plat(struct
{
struct mtk_serial_priv *priv = dev_get_priv(dev);
fdt_addr_t addr;
- struct clk clk;
int err;
addr = dev_read_addr(dev);
@@ -220,22 +235,19 @@ static int mtk_serial_of_to_plat(struct
priv->regs = map_physmem(addr, 0, MAP_NOCACHE);
- err = clk_get_by_index(dev, 0, &clk);
- if (!err) {
- err = clk_get_rate(&clk);
- if (!IS_ERR_VALUE(err))
- priv->clock = err;
- } else if (err != -ENOENT && err != -ENODEV && err != -ENOSYS) {
- debug("mtk_serial: failed to get clock\n");
- return err;
- }
-
- if (!priv->clock)
- priv->clock = dev_read_u32_default(dev, "clock-frequency", 0);
-
- if (!priv->clock) {
- debug("mtk_serial: clock not defined\n");
- return -EINVAL;
+ err = clk_get_by_index(dev, 0, &priv->clk);
+ if (err) {
+ err = dev_read_u32(dev, "clock-frequency", &priv->fixed_clk_rate);
+ if (err) {
+ dev_err(dev, "baud clock not defined\n");
+ return -EINVAL;
+ }
+ } else {
+ err = clk_get_rate(&priv->clk);
+ if (IS_ERR_VALUE(err)) {
+ dev_err(dev, "invalid baud clock\n");
+ return -EINVAL;
+ }
}
priv->force_highspeed = dev_read_bool(dev, "mediatek,force-highspeed");
@@ -273,7 +285,7 @@ DECLARE_GLOBAL_DATA_PTR;
#define DECLARE_HSUART_PRIV(port) \
static struct mtk_serial_priv mtk_hsuart##port = { \
.regs = (struct mtk_serial_regs *)CONFIG_SYS_NS16550_COM##port, \
- .clock = CONFIG_SYS_NS16550_CLK \
+ .fixed_clk_rate = CONFIG_SYS_NS16550_CLK \
};
#define DECLARE_HSUART_FUNCTIONS(port) \
@@ -282,12 +294,14 @@ DECLARE_GLOBAL_DATA_PTR;
writel(0, &mtk_hsuart##port.regs->ier); \
writel(UART_MCRVAL, &mtk_hsuart##port.regs->mcr); \
writel(UART_FCRVAL, &mtk_hsuart##port.regs->fcr); \
- _mtk_serial_setbrg(&mtk_hsuart##port, gd->baudrate); \
+ _mtk_serial_setbrg(&mtk_hsuart##port, gd->baudrate, \
+ mtk_hsuart##port.fixed_clk_rate); \
return 0 ; \
} \
static void mtk_serial##port##_setbrg(void) \
{ \
- _mtk_serial_setbrg(&mtk_hsuart##port, gd->baudrate); \
+ _mtk_serial_setbrg(&mtk_hsuart##port, gd->baudrate, \
+ mtk_hsuart##port.fixed_clk_rate); \
} \
static int mtk_serial##port##_getc(void) \
{ \
@@ -427,13 +441,13 @@ static inline void _debug_uart_init(void
struct mtk_serial_priv priv;
priv.regs = (void *) CONFIG_DEBUG_UART_BASE;
- priv.clock = CONFIG_DEBUG_UART_CLOCK;
+ priv.fixed_clk_rate = CONFIG_DEBUG_UART_CLOCK;
writel(0, &priv.regs->ier);
writel(UART_MCRVAL, &priv.regs->mcr);
writel(UART_FCRVAL, &priv.regs->fcr);
- _mtk_serial_setbrg(&priv, CONFIG_BAUDRATE);
+ _mtk_serial_setbrg(&priv, CONFIG_BAUDRATE, priv.fixed_clk_rate);
}
static inline void _debug_uart_putc(int ch)