mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 15:32:33 +00:00
7d7aa2fd92
This change makes the names of Broadcom targets consistent by using the common notation based on SoC/CPU ID (which is used internally anyway), bcmXXXX instead of brcmXXXX. This is even used for target TITLE in make menuconfig already, only the short target name used brcm so far. Despite, since subtargets range from bcm2708 to bcm2711, it seems appropriate to use bcm27xx instead of bcm2708 (again, as already done for BOARDNAME). This also renames the packages brcm2708-userland and brcm2708-gpu-fw. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
188 lines
5.2 KiB
Diff
188 lines
5.2 KiB
Diff
From 2308f60bb68de69306c542de3983be0007cad37b Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.org>
|
|
Date: Mon, 15 Jul 2019 10:39:05 +0100
|
|
Subject: [PATCH] overlays: Add PCF2129 RTC
|
|
|
|
Add support for the PCF2129 RTC to i2c-rtc and i2c-rtc-gpio overlays.
|
|
Also add rv3028 to i2c-rtc-gpio (it was missed previously), and don't
|
|
attempt to set an alternate address for the PCF2127.
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
|
|
---
|
|
arch/arm/boot/dts/overlays/README | 11 ++++-
|
|
.../dts/overlays/i2c-rtc-gpio-overlay.dts | 41 +++++++++++++++++--
|
|
.../arm/boot/dts/overlays/i2c-rtc-overlay.dts | 19 ++++++++-
|
|
3 files changed, 64 insertions(+), 7 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -1022,6 +1022,8 @@ Params: abx80x Select o
|
|
|
|
pcf2127 Select the PCF2127 device
|
|
|
|
+ pcf2129 Select the PCF2129 device
|
|
+
|
|
pcf8523 Select the PCF8523 device
|
|
|
|
pcf8563 Select the PCF8563 device
|
|
@@ -1067,10 +1069,14 @@ Params: abx80x Select o
|
|
|
|
pcf2127 Select the PCF2127 device
|
|
|
|
+ pcf2129 Select the PCF2129 device
|
|
+
|
|
pcf8523 Select the PCF8523 device
|
|
|
|
pcf8563 Select the PCF8563 device
|
|
|
|
+ rv3028 Select the Micro Crystal RV3028 device
|
|
+
|
|
addr Sets the address for the RTC. Note that the
|
|
device must be configured to use the specified
|
|
address.
|
|
@@ -1079,11 +1085,14 @@ Params: abx80x Select o
|
|
"schottky" (ABx80x only)
|
|
|
|
trickle-resistor-ohms Resistor value for trickle charge (DS1339,
|
|
- ABx80x)
|
|
+ ABx80x, RV3028)
|
|
|
|
wakeup-source Specify that the RTC can be used as a wakeup
|
|
source
|
|
|
|
+ backup-switchover-mode Backup power supply switch mode. Must be 0 for
|
|
+ off or 1 for Vdd < VBackup (RV3028 only)
|
|
+
|
|
i2c_gpio_sda GPIO used for I2C data (default "23")
|
|
|
|
i2c_gpio_scl GPIO used for I2C clock (default "24")
|
|
--- a/arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts
|
|
@@ -121,7 +121,7 @@
|
|
#size-cells = <0>;
|
|
status = "okay";
|
|
|
|
- pcf2127: pcf2127@51 {
|
|
+ pcf2127@51 {
|
|
compatible = "nxp,pcf2127";
|
|
reg = <0x51>;
|
|
status = "okay";
|
|
@@ -174,6 +174,36 @@
|
|
};
|
|
};
|
|
|
|
+ fragment@11 {
|
|
+ target = <&i2c_gpio>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ status = "okay";
|
|
+
|
|
+ rv3028: rv3028@52 {
|
|
+ compatible = "microcrystal,rv3028";
|
|
+ reg = <0x52>;
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@12 {
|
|
+ target = <&i2c_gpio>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ status = "okay";
|
|
+
|
|
+ pcf2129@51 {
|
|
+ compatible = "nxp,pcf2129";
|
|
+ reg = <0x51>;
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
__overrides__ {
|
|
abx80x = <0>,"+1";
|
|
ds1307 = <0>,"+2";
|
|
@@ -185,6 +215,8 @@
|
|
pcf8523 = <0>,"+8";
|
|
pcf8563 = <0>,"+9";
|
|
m41t62 = <0>,"+10";
|
|
+ rv3028 = <0>,"+11";
|
|
+ pcf2129 = <0>,"+12";
|
|
|
|
addr = <&abx80x>, "reg:0",
|
|
<&ds1307>, "reg:0",
|
|
@@ -192,18 +224,19 @@
|
|
<&ds3231>, "reg:0",
|
|
<&mcp7940x>, "reg:0",
|
|
<&mcp7941x>, "reg:0",
|
|
- <&pcf2127>, "reg:0",
|
|
<&pcf8523>, "reg:0",
|
|
<&pcf8563>, "reg:0",
|
|
<&m41t62>, "reg:0";
|
|
|
|
trickle-diode-type = <&abx80x>,"abracon,tc-diode";
|
|
trickle-resistor-ohms = <&ds1339>,"trickle-resistor-ohms:0",
|
|
- <&abx80x>,"abracon,tc-resistor";
|
|
+ <&abx80x>,"abracon,tc-resistor",
|
|
+ <&rv3028>,"trickle-resistor-ohms:0";
|
|
+ backup-switchover-mode = <&rv3028>,"backup-switchover-mode:0";
|
|
wakeup-source = <&ds1339>,"wakeup-source?",
|
|
<&ds3231>,"wakeup-source?",
|
|
<&mcp7940x>,"wakeup-source?",
|
|
- <&mcp7941x>,"wakeup-source?";
|
|
+ <&mcp7941x>,"wakeup-source?";
|
|
i2c_gpio_sda = <&i2c_gpio>,"gpios:4";
|
|
i2c_gpio_scl = <&i2c_gpio>,"gpios:16";
|
|
i2c_gpio_delay_us = <&i2c_gpio>,"i2c-gpio,delay-us:0";
|
|
--- a/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts
|
|
@@ -105,7 +105,7 @@
|
|
#size-cells = <0>;
|
|
status = "okay";
|
|
|
|
- pcf2127: pcf2127@51 {
|
|
+ pcf2127@51 {
|
|
compatible = "nxp,pcf2127";
|
|
reg = <0x51>;
|
|
status = "okay";
|
|
@@ -173,6 +173,21 @@
|
|
};
|
|
};
|
|
|
|
+ fragment@11 {
|
|
+ target = <&i2c_arm>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ status = "okay";
|
|
+
|
|
+ pcf2129@51 {
|
|
+ compatible = "nxp,pcf2129";
|
|
+ reg = <0x51>;
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
__overrides__ {
|
|
abx80x = <0>,"+0";
|
|
ds1307 = <0>,"+1";
|
|
@@ -185,6 +200,7 @@
|
|
pcf8563 = <0>,"+8";
|
|
m41t62 = <0>,"+9";
|
|
rv3028 = <0>,"+10";
|
|
+ pcf2129 = <0>,"+11";
|
|
|
|
addr = <&abx80x>, "reg:0",
|
|
<&ds1307>, "reg:0",
|
|
@@ -192,7 +208,6 @@
|
|
<&ds3231>, "reg:0",
|
|
<&mcp7940x>, "reg:0",
|
|
<&mcp7941x>, "reg:0",
|
|
- <&pcf2127>, "reg:0",
|
|
<&pcf8523>, "reg:0",
|
|
<&pcf8563>, "reg:0",
|
|
<&m41t62>, "reg:0";
|