mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 15:32:33 +00:00
7d7aa2fd92
This change makes the names of Broadcom targets consistent by using the common notation based on SoC/CPU ID (which is used internally anyway), bcmXXXX instead of brcmXXXX. This is even used for target TITLE in make menuconfig already, only the short target name used brcm so far. Despite, since subtargets range from bcm2708 to bcm2711, it seems appropriate to use bcm27xx instead of bcm2708 (again, as already done for BOARDNAME). This also renames the packages brcm2708-userland and brcm2708-gpu-fw. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
293 lines
8.1 KiB
Diff
293 lines
8.1 KiB
Diff
From 76c252645ad542bd35ce52230635f36e3c0f730d Mon Sep 17 00:00:00 2001
|
|
From: Gordon Garrity <gordon@iqaudio.com>
|
|
Date: Sat, 8 Mar 2014 16:56:57 +0000
|
|
Subject: [PATCH] Add IQaudIO Sound Card support for Raspberry Pi
|
|
|
|
Set a limit of 0dB on Digital Volume Control
|
|
|
|
The main volume control in the PCM512x DAC has a range up to
|
|
+24dB. This is dangerously loud and can potentially cause massive
|
|
clipping in the output stages. Therefore this sets a sensible
|
|
limit of 0dB for this control.
|
|
|
|
Allow up to 24dB digital gain to be applied when using IQAudIO DAC+
|
|
|
|
24db_digital_gain DT param can be used to specify that PCM512x
|
|
codec "Digital" volume control should not be limited to 0dB gain,
|
|
and if specified will allow the full 24dB gain.
|
|
|
|
Modify IQAudIO DAC+ ASoC driver to set card/dai config from dt
|
|
|
|
Add the ability to set the card name, dai name and dai stream name, from
|
|
dt config.
|
|
|
|
Signed-off-by: DigitalDreamtime <clive.messer@digitaldreamtime.co.uk>
|
|
|
|
IQaudIO: auto-mute for AMP+ and DigiAMP+
|
|
|
|
IQAudIO amplifier mute via GPIO22. Add dt params for "one-shot" unmute
|
|
and auto mute.
|
|
|
|
Revision 2, auto mute implementing HiassofT suggestion to mute/unmute
|
|
using set_bias_level, rather than startup/shutdown....
|
|
"By default DAPM waits 5 seconds (pmdown_time) before shutting down
|
|
playback streams so a close/stop immediately followed by open/start
|
|
doesn't trigger an amp mute+unmute."
|
|
|
|
Tested on both AMP+ (via DAC+) and DigiAMP+, with both options...
|
|
|
|
dtoverlay=iqaudio-dacplus,unmute_amp
|
|
"one-shot" unmute when kernel module loads.
|
|
|
|
dtoverlay=iqaudio-dacplus,auto_mute_amp
|
|
Unmute amp when ALSA device opened by a client. Mute, with 5 second delay
|
|
when ALSA device closed. (Re-opening the device within the 5 second close
|
|
window, will cancel mute.)
|
|
|
|
Revision 4, using gpiod.
|
|
|
|
Revision 5, clean-up formatting before adding mute code.
|
|
- Convert tab plus 4 space formatting to 2x tab
|
|
- Remove '// NOT USED' commented code
|
|
|
|
Revision 6, don't attempt to "one-shot" unmute amp, unless card is
|
|
successfully registered.
|
|
|
|
Signed-off-by: DigitalDreamtime <clive.messer@digitaldreamtime.co.uk>
|
|
|
|
ASoC: iqaudio-dac: fix S24_LE format
|
|
|
|
Remove set_bclk_ratio call so 24-bit data is transmitted in
|
|
24 bclk cycles.
|
|
|
|
Signed-off-by: Matthias Reichl <hias@horus.com>
|
|
---
|
|
sound/soc/bcm/iqaudio-dac.c | 221 ++++++++++++++++++++++++++++++++++++
|
|
1 file changed, 221 insertions(+)
|
|
create mode 100644 sound/soc/bcm/iqaudio-dac.c
|
|
|
|
--- /dev/null
|
|
+++ b/sound/soc/bcm/iqaudio-dac.c
|
|
@@ -0,0 +1,221 @@
|
|
+/*
|
|
+ * ASoC Driver for IQaudIO DAC
|
|
+ *
|
|
+ * Author: Florian Meier <florian.meier@koalo.de>
|
|
+ * Copyright 2013
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or
|
|
+ * modify it under the terms of the GNU General Public License
|
|
+ * version 2 as published by the Free Software Foundation.
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful, but
|
|
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
+ * General Public License for more details.
|
|
+ */
|
|
+
|
|
+#include <linux/module.h>
|
|
+#include <linux/gpio/consumer.h>
|
|
+#include <linux/platform_device.h>
|
|
+
|
|
+#include <sound/core.h>
|
|
+#include <sound/pcm.h>
|
|
+#include <sound/pcm_params.h>
|
|
+#include <sound/soc.h>
|
|
+#include <sound/jack.h>
|
|
+
|
|
+static bool digital_gain_0db_limit = true;
|
|
+
|
|
+static struct gpio_desc *mute_gpio;
|
|
+
|
|
+static int snd_rpi_iqaudio_dac_init(struct snd_soc_pcm_runtime *rtd)
|
|
+{
|
|
+ if (digital_gain_0db_limit)
|
|
+ {
|
|
+ int ret;
|
|
+ struct snd_soc_card *card = rtd->card;
|
|
+
|
|
+ ret = snd_soc_limit_volume(card, "Digital Playback Volume", 207);
|
|
+ if (ret < 0)
|
|
+ dev_warn(card->dev, "Failed to set volume limit: %d\n", ret);
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void snd_rpi_iqaudio_gpio_mute(struct snd_soc_card *card)
|
|
+{
|
|
+ if (mute_gpio) {
|
|
+ dev_info(card->dev, "%s: muting amp using GPIO22\n",
|
|
+ __func__);
|
|
+ gpiod_set_value_cansleep(mute_gpio, 0);
|
|
+ }
|
|
+}
|
|
+
|
|
+static void snd_rpi_iqaudio_gpio_unmute(struct snd_soc_card *card)
|
|
+{
|
|
+ if (mute_gpio) {
|
|
+ dev_info(card->dev, "%s: un-muting amp using GPIO22\n",
|
|
+ __func__);
|
|
+ gpiod_set_value_cansleep(mute_gpio, 1);
|
|
+ }
|
|
+}
|
|
+
|
|
+static int snd_rpi_iqaudio_set_bias_level(struct snd_soc_card *card,
|
|
+ struct snd_soc_dapm_context *dapm, enum snd_soc_bias_level level)
|
|
+{
|
|
+ struct snd_soc_pcm_runtime *rtd;
|
|
+ struct snd_soc_dai *codec_dai;
|
|
+
|
|
+ rtd = snd_soc_get_pcm_runtime(card, card->dai_link[0].name);
|
|
+ codec_dai = rtd->codec_dai;
|
|
+
|
|
+ if (dapm->dev != codec_dai->dev)
|
|
+ return 0;
|
|
+
|
|
+ switch (level) {
|
|
+ case SND_SOC_BIAS_PREPARE:
|
|
+ if (dapm->bias_level != SND_SOC_BIAS_STANDBY)
|
|
+ break;
|
|
+
|
|
+ /* UNMUTE AMP */
|
|
+ snd_rpi_iqaudio_gpio_unmute(card);
|
|
+
|
|
+ break;
|
|
+ case SND_SOC_BIAS_STANDBY:
|
|
+ if (dapm->bias_level != SND_SOC_BIAS_PREPARE)
|
|
+ break;
|
|
+
|
|
+ /* MUTE AMP */
|
|
+ snd_rpi_iqaudio_gpio_mute(card);
|
|
+
|
|
+ break;
|
|
+ default:
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct snd_soc_dai_link snd_rpi_iqaudio_dac_dai[] = {
|
|
+{
|
|
+ .cpu_dai_name = "bcm2708-i2s.0",
|
|
+ .codec_dai_name = "pcm512x-hifi",
|
|
+ .platform_name = "bcm2708-i2s.0",
|
|
+ .codec_name = "pcm512x.1-004c",
|
|
+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
|
|
+ SND_SOC_DAIFMT_CBS_CFS,
|
|
+ .init = snd_rpi_iqaudio_dac_init,
|
|
+},
|
|
+};
|
|
+
|
|
+/* audio machine driver */
|
|
+static struct snd_soc_card snd_rpi_iqaudio_dac = {
|
|
+ .owner = THIS_MODULE,
|
|
+ .dai_link = snd_rpi_iqaudio_dac_dai,
|
|
+ .num_links = ARRAY_SIZE(snd_rpi_iqaudio_dac_dai),
|
|
+};
|
|
+
|
|
+static int snd_rpi_iqaudio_dac_probe(struct platform_device *pdev)
|
|
+{
|
|
+ int ret = 0;
|
|
+ bool gpio_unmute = false;
|
|
+
|
|
+ snd_rpi_iqaudio_dac.dev = &pdev->dev;
|
|
+
|
|
+ if (pdev->dev.of_node) {
|
|
+ struct device_node *i2s_node;
|
|
+ struct snd_soc_card *card = &snd_rpi_iqaudio_dac;
|
|
+ struct snd_soc_dai_link *dai = &snd_rpi_iqaudio_dac_dai[0];
|
|
+ bool auto_gpio_mute = false;
|
|
+
|
|
+ i2s_node = of_parse_phandle(pdev->dev.of_node,
|
|
+ "i2s-controller", 0);
|
|
+ if (i2s_node) {
|
|
+ dai->cpu_dai_name = NULL;
|
|
+ dai->cpu_of_node = i2s_node;
|
|
+ dai->platform_name = NULL;
|
|
+ dai->platform_of_node = i2s_node;
|
|
+ }
|
|
+
|
|
+ digital_gain_0db_limit = !of_property_read_bool(
|
|
+ pdev->dev.of_node, "iqaudio,24db_digital_gain");
|
|
+
|
|
+ if (of_property_read_string(pdev->dev.of_node, "card_name",
|
|
+ &card->name))
|
|
+ card->name = "IQaudIODAC";
|
|
+
|
|
+ if (of_property_read_string(pdev->dev.of_node, "dai_name",
|
|
+ &dai->name))
|
|
+ dai->name = "IQaudIO DAC";
|
|
+
|
|
+ if (of_property_read_string(pdev->dev.of_node,
|
|
+ "dai_stream_name", &dai->stream_name))
|
|
+ dai->stream_name = "IQaudIO DAC HiFi";
|
|
+
|
|
+ /* gpio_unmute - one time unmute amp using GPIO */
|
|
+ gpio_unmute = of_property_read_bool(pdev->dev.of_node,
|
|
+ "iqaudio-dac,unmute-amp");
|
|
+
|
|
+ /* auto_gpio_mute - mute/unmute amp using GPIO */
|
|
+ auto_gpio_mute = of_property_read_bool(pdev->dev.of_node,
|
|
+ "iqaudio-dac,auto-mute-amp");
|
|
+
|
|
+ if (auto_gpio_mute || gpio_unmute) {
|
|
+ mute_gpio = devm_gpiod_get_optional(&pdev->dev, "mute",
|
|
+ GPIOD_OUT_LOW);
|
|
+ if (IS_ERR(mute_gpio)) {
|
|
+ ret = PTR_ERR(mute_gpio);
|
|
+ dev_err(&pdev->dev,
|
|
+ "Failed to get mute gpio: %d\n", ret);
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ if (auto_gpio_mute && mute_gpio)
|
|
+ snd_rpi_iqaudio_dac.set_bias_level =
|
|
+ snd_rpi_iqaudio_set_bias_level;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ ret = snd_soc_register_card(&snd_rpi_iqaudio_dac);
|
|
+ if (ret) {
|
|
+ if (ret != -EPROBE_DEFER)
|
|
+ dev_err(&pdev->dev,
|
|
+ "snd_soc_register_card() failed: %d\n", ret);
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ if (gpio_unmute && mute_gpio)
|
|
+ snd_rpi_iqaudio_gpio_unmute(&snd_rpi_iqaudio_dac);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int snd_rpi_iqaudio_dac_remove(struct platform_device *pdev)
|
|
+{
|
|
+ snd_rpi_iqaudio_gpio_mute(&snd_rpi_iqaudio_dac);
|
|
+
|
|
+ return snd_soc_unregister_card(&snd_rpi_iqaudio_dac);
|
|
+}
|
|
+
|
|
+static const struct of_device_id iqaudio_of_match[] = {
|
|
+ { .compatible = "iqaudio,iqaudio-dac", },
|
|
+ {},
|
|
+};
|
|
+MODULE_DEVICE_TABLE(of, iqaudio_of_match);
|
|
+
|
|
+static struct platform_driver snd_rpi_iqaudio_dac_driver = {
|
|
+ .driver = {
|
|
+ .name = "snd-rpi-iqaudio-dac",
|
|
+ .owner = THIS_MODULE,
|
|
+ .of_match_table = iqaudio_of_match,
|
|
+ },
|
|
+ .probe = snd_rpi_iqaudio_dac_probe,
|
|
+ .remove = snd_rpi_iqaudio_dac_remove,
|
|
+};
|
|
+
|
|
+module_platform_driver(snd_rpi_iqaudio_dac_driver);
|
|
+
|
|
+MODULE_AUTHOR("Florian Meier <florian.meier@koalo.de>");
|
|
+MODULE_DESCRIPTION("ASoC Driver for IQAudio DAC");
|
|
+MODULE_LICENSE("GPL v2");
|