mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 01:11:14 +00:00
d168c2cf81
Some Ubiquiti U-boot versions, in particular the "U-Boot 1.1.4.2-s956 (Jun 10 2015 - 10:54:50)" found with AirOS 5.6, do not correctly flush the caches for the whole kernel address range after decompressing the kernel image, leading to hard to debug boot failures, depending on kernel version and configuration. As a workaround, prepend the relocate-kernels loader, which will invalidate the caches after moving the kernel to the correct load address. Reported-by: Andreas Ziegler <dev@andreas-ziegler.de> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
284 lines
7.5 KiB
Makefile
284 lines
7.5 KiB
Makefile
DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE
|
|
|
|
# mkubntimage is using the kernel image direct
|
|
# routerboard creates partitions out of the ubnt header
|
|
define Build/mkubntimage
|
|
-$(STAGING_DIR_HOST)/bin/mkfwimage \
|
|
-B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
|
|
-k $(IMAGE_KERNEL) \
|
|
-r $@ \
|
|
-o $@
|
|
endef
|
|
|
|
# all UBNT XM device expect the kernel image to have 1024k while flash, when
|
|
# booting the image, the size doesn't matter.
|
|
define Build/mkubntimage-split
|
|
-[ -f $@ ] && ( \
|
|
dd if=$@ of=$@.old1 bs=1024k count=1; \
|
|
dd if=$@ of=$@.old2 bs=1024k skip=1; \
|
|
$(STAGING_DIR_HOST)/bin/mkfwimage \
|
|
-B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
|
|
-k $@.old1 \
|
|
-r $@.old2 \
|
|
-o $@; \
|
|
rm $@.old1 $@.old2 )
|
|
endef
|
|
|
|
define Build/mkubntimage2
|
|
-$(STAGING_DIR_HOST)/bin/mkfwimage2 -f 0x9f000000 \
|
|
-v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
|
|
-p jffs2:0x50000:0xf60000:0:0:$@ \
|
|
-o $@.new
|
|
@mv $@.new $@
|
|
endef
|
|
|
|
|
|
# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
|
|
# UBNT_TYPE e.g. one of (BZ, XM, XW)
|
|
# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x)
|
|
define Device/ubnt
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
DEVICE_PROFILE := UBNT
|
|
IMAGE_SIZE := 7552k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro
|
|
UBNT_BOARD := XM
|
|
IMAGES := sysupgrade.bin factory.bin
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage-split
|
|
endef
|
|
|
|
define Device/ubnt-xm
|
|
$(Device/ubnt)
|
|
DEVICE_PACKAGES += kmod-usb-ohci
|
|
UBNT_TYPE := XM
|
|
UBNT_CHIP := ar7240
|
|
KERNEL := kernel-bin | patch-cmdline | relocate-kernel | lzma | uImage lzma
|
|
endef
|
|
|
|
define Device/ubnt-xw
|
|
$(Device/ubnt)
|
|
UBNT_TYPE := XW
|
|
UBNT_CHIP := ar934x
|
|
endef
|
|
|
|
define Device/ubnt-bz
|
|
$(Device/ubnt)
|
|
UBNT_TYPE := BZ
|
|
UBNT_CHIP := ar7240
|
|
endef
|
|
|
|
define Device/rw2458n
|
|
$(Device/ubnt-xm)
|
|
DEVICE_TITLE := Ubiquiti RW2458N
|
|
BOARDNAME := RW2458N
|
|
endef
|
|
TARGET_DEVICES += rw2458n
|
|
|
|
define Device/ubnt-airrouter
|
|
$(Device/ubnt-xm)
|
|
DEVICE_TITLE := Ubiquiti AirRouter
|
|
BOARDNAME := UBNT-AR
|
|
endef
|
|
TARGET_DEVICES += ubnt-airrouter
|
|
|
|
define Device/ubnt-bullet-m
|
|
$(Device/ubnt-xm)
|
|
DEVICE_TITLE := Ubiquiti Bullet-M
|
|
BOARDNAME := UBNT-BM
|
|
endef
|
|
TARGET_DEVICES += ubnt-bullet-m
|
|
|
|
define Device/ubnt-rocket-m
|
|
$(Device/ubnt-xm)
|
|
DEVICE_TITLE := Ubiquiti Rocket-M
|
|
BOARDNAME := UBNT-RM
|
|
endef
|
|
TARGET_DEVICES += ubnt-rocket-m
|
|
|
|
define Device/ubnt-nano-m
|
|
$(Device/ubnt-xm)
|
|
DEVICE_TITLE := Ubiquiti Nano-M
|
|
BOARDNAME := UBNT-NM
|
|
endef
|
|
TARGET_DEVICES += ubnt-nano-m
|
|
|
|
define Device/ubnt-unifi
|
|
$(Device/ubnt-bz)
|
|
DEVICE_TITLE := Ubiquiti UniFi
|
|
BOARDNAME := UBNT-UF
|
|
DEVICE_PROFILE += UBNTUNIFI
|
|
endef
|
|
TARGET_DEVICES += ubnt-unifi
|
|
|
|
define Device/ubnt-unifiac
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
DEVICE_PROFILE := UBNT
|
|
IMAGE_SIZE := 7744k
|
|
MTDPARTS := spi0.0:384k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),7744k(ubnt-airos)ro,128k(bs),256k(cfg)ro,64k(EEPROM)ro
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
|
|
define Device/ubnt-unifiac-lite
|
|
$(Device/ubnt-unifiac)
|
|
DEVICE_TITLE := Ubiquiti UniFi AC-Lite
|
|
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
|
|
DEVICE_PROFILE += UBNTUNIFIACLITE
|
|
BOARDNAME := UBNT-UF-AC-LITE
|
|
endef
|
|
TARGET_DEVICES += ubnt-unifiac-lite
|
|
|
|
define Device/ubnt-unifiac-mesh
|
|
$(Device/ubnt-unifiac-lite)
|
|
DEVICE_TITLE := Ubiquiti UniFi AC-Mesh
|
|
endef
|
|
TARGET_DEVICES += ubnt-unifiac-mesh
|
|
|
|
define Device/ubnt-unifiac-pro
|
|
$(Device/ubnt-unifiac)
|
|
DEVICE_TITLE := Ubiquiti UniFi AC-Pro
|
|
DEVICE_PACKAGES += kmod-ath10k ath10k-firmware-qca988x
|
|
DEVICE_PROFILE += UBNTUNIFIACPRO
|
|
BOARDNAME := UBNT-UF-AC-PRO
|
|
endef
|
|
TARGET_DEVICES += ubnt-unifiac-pro
|
|
|
|
define Device/ubnt-unifi-outdoor
|
|
$(Device/ubnt-bz)
|
|
DEVICE_TITLE := Ubiquiti UniFi Outdoor
|
|
BOARDNAME := UBNT-U20
|
|
DEVICE_PROFILE += UBNTUNIFIOUTDOOR
|
|
endef
|
|
TARGET_DEVICES += ubnt-unifi-outdoor
|
|
|
|
define Device/ubnt-nano-m-xw
|
|
$(Device/ubnt-xw)
|
|
DEVICE_TITLE := Ubiquiti Nano M XW
|
|
BOARDNAME := UBNT-NM-XW
|
|
endef
|
|
TARGET_DEVICES += ubnt-nano-m-xw
|
|
|
|
define Device/ubnt-lbe-m5
|
|
$(Device/ubnt-xw)
|
|
DEVICE_TITLE := Ubiquiti Litebeam M5
|
|
BOARDNAME := UBNT-LBE-M5
|
|
endef
|
|
TARGET_DEVICES += ubnt-lbe-m5
|
|
|
|
define Device/ubnt-loco-m-xw
|
|
$(Device/ubnt-xw)
|
|
DEVICE_TITLE := Ubiquiti Loco XW
|
|
BOARDNAME := UBNT-LOCO-XW
|
|
endef
|
|
TARGET_DEVICES += ubnt-loco-m-xw
|
|
|
|
define Device/ubnt-rocket-m-xw
|
|
$(Device/ubnt-xw)
|
|
DEVICE_TITLE := Ubiquiti Rocket M XW
|
|
BOARDNAME := UBNT-RM-XW
|
|
endef
|
|
TARGET_DEVICES += ubnt-rocket-m-xw
|
|
|
|
define Device/ubnt-rocket-m-ti
|
|
$(Device/ubnt-xw)
|
|
DEVICE_TITLE := Ubiquiti Rocket M TI
|
|
BOARDNAME := UBNT-RM-TI
|
|
UBNT_TYPE := TI
|
|
endef
|
|
TARGET_DEVICES += ubnt-rocket-m-ti
|
|
|
|
define Device/ubnt-air-gateway
|
|
$(Device/ubnt-xm)
|
|
DEVICE_TITLE := Ubiquiti Air Gateway
|
|
BOARDNAME := UBNT-AGW
|
|
UBNT_TYPE := AirGW
|
|
UBNT_CHIP := ar933x
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
TARGET_DEVICES += ubnt-air-gateway
|
|
|
|
define Device/ubnt-air-gateway-pro
|
|
$(Device/ubnt-xm)
|
|
DEVICE_TITLE := Ubiquiti Air Gateway Pro
|
|
BOARDNAME := UBNT-AGWP
|
|
UBNT_TYPE := AirGWP
|
|
UBNT_CHIP := ar934x
|
|
endef
|
|
TARGET_DEVICES += ubnt-air-gateway-pro
|
|
|
|
define Device/ubdev01
|
|
$(Device/ubnt-xm)
|
|
DEVICE_TITLE := Ubiquiti ubDEV01
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro
|
|
BOARDNAME := UBNT-UF
|
|
UBNT_BOARD := UBDEV01
|
|
endef
|
|
TARGET_DEVICES += ubdev01
|
|
|
|
define Device/ubnt-routerstation
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2
|
|
DEVICE_PROFILE := UBNT
|
|
IMAGE_SIZE := 16128k
|
|
IMAGES := sysupgrade.bin factory.bin
|
|
IMAGE/factory.bin := append-rootfs | pad-rootfs | mkubntimage
|
|
IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | combined-image | check-size $$$$(IMAGE_SIZE)
|
|
KERNEL := kernel-bin | patch-cmdline | lzma | pad-to $$(BLOCKSIZE)
|
|
endef
|
|
|
|
define Device/ubnt-rs
|
|
$(Device/ubnt-routerstation)
|
|
DEVICE_TITLE := Ubiquiti RouterStation
|
|
BOARDNAME := UBNT-RS
|
|
DEVICE_PROFILE += UBNTRS
|
|
UBNT_BOARD := RS
|
|
UBNT_TYPE := RSx
|
|
UBNT_CHIP := ar7100
|
|
endef
|
|
TARGET_DEVICES += ubnt-rs
|
|
|
|
define Device/ubnt-rspro
|
|
$(Device/ubnt-routerstation)
|
|
DEVICE_TITLE := Ubiquiti RouterStation Pro
|
|
BOARDNAME := UBNT-RSPRO
|
|
DEVICE_PROFILE += UBNTRSPRO
|
|
UBNT_BOARD := RSPRO
|
|
UBNT_TYPE := RSPRO
|
|
UBNT_CHIP := ar7100pro
|
|
endef
|
|
TARGET_DEVICES += ubnt-rspro
|
|
|
|
define Device/ubnt-ls-sr71
|
|
$(Device/ubnt-routerstation)
|
|
DEVICE_TITLE := Ubiquiti LS-SR71
|
|
BOARDNAME := UBNT-LS-SR71
|
|
UBNT_BOARD := LS-SR71
|
|
UBNT_TYPE := LS-SR71
|
|
UBNT_CHIP := ar7100
|
|
endef
|
|
TARGET_DEVICES += ubnt-ls-sr71
|
|
|
|
define Device/ubnt-uap-pro
|
|
DEVICE_TITLE := Ubiquiti UAP Pro
|
|
KERNEL_SIZE := 1792k
|
|
IMAGE_SIZE := 15744k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1792k(kernel),13952k(rootfs),256k(cfg)ro,64k(EEPROM)ro,15744k@0x50000(firmware)
|
|
UBNT_TYPE := BZ
|
|
UBNT_CHIP := ar934x
|
|
BOARDNAME := UAP-PRO
|
|
DEVICE_PROFILE := UBNT UAPPRO
|
|
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 kernel0
|
|
IMAGES := sysupgrade.bin factory.bin
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage2
|
|
endef
|
|
TARGET_DEVICES += ubnt-uap-pro
|
|
|
|
define Device/ubnt-unifi-outdoor-plus
|
|
$(Device/ubnt-uap-pro)
|
|
DEVICE_TITLE := Ubiquiti UniFi Outdoor Plus
|
|
UBNT_CHIP := ar7240
|
|
BOARDNAME := UBNT-UOP
|
|
DEVICE_PROFILE := UBNT
|
|
endef
|
|
TARGET_DEVICES += ubnt-unifi-outdoor-plus
|