mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-19 21:58:04 +00:00
4070e2a64c
This target adds support for the StarFive JH7100 and JH7110 SoCs, based on 6.1, as well as a couple boards equipped with these. Specifications: SoCs: JH7100: - StarFive JH7100 dual-core RISC-V (U74, RC64GC) - additional monitoring (S7) and control (E24) cores - 2Mb L2 cache JH7110: - StarFive JH7110 quad-core RISC-V (U74, RV64GC) - additional monitoring (S7) and control (E24) cores - 2Mb L2 cache Boards: VisionFive1: - JH7100 @ 1GHz - Memory: 8Gb LPDDR4 - 4x USB3.0 - 1x GBit ethernet - AMPak 6236 wifi / bluetooth - audio - powered via USB-C VisionFive2: - JH7110 @ 1.5GHz - Memory: 2/4/8Gb DDR4 - 2x Gbit ethernet - 2x USB3.0 / 2x USB2.0 - eMMC / SDIO - various multimedia input/outputs (MIPI CSI, HDMI, audio) - M.2 key M slot - PoE support - powered via USB-C Installation: Standard SD-card installation via dd-ing the generated image to an SD-card of at least 256Mb. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
128 lines
4.2 KiB
Diff
128 lines
4.2 KiB
Diff
From 89c86fda8cee5b93ce213dcc46b2cf27e5ee3312 Mon Sep 17 00:00:00 2001
|
|
From: Emil Renner Berthing <kernel@esmil.dk>
|
|
Date: Sat, 17 Jul 2021 21:50:38 +0200
|
|
Subject: [PATCH 1009/1024] pinctrl: starfive: Reset pinmux settings
|
|
|
|
Current u-boot doesn't seem to take into account that some GPIOs are
|
|
configured as inputs/outputs of certain peripherals on power-up. This
|
|
means it ends up configuring some GPIOs as inputs to more than one
|
|
peripheral which the documentation explicitly says is illegal. Similarly
|
|
it also ends up configuring more than one GPIO as output of the same
|
|
peripheral. While not explicitly mentioned by the documentation this
|
|
also seems like a bad idea.
|
|
|
|
The easiest way to remedy this mess is to just disconnect all GPIOs from
|
|
peripherals and have our pinmux configuration set everything up
|
|
properly. This, however, means that we'd disconnect the serial console
|
|
from its pins for a while, so add a device tree property to keep
|
|
certain GPIOs from being reset.
|
|
|
|
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
|
|
---
|
|
.../pinctrl/starfive,jh7100-pinctrl.yaml | 4 ++
|
|
.../starfive/pinctrl-starfive-jh7100.c | 66 +++++++++++++++++++
|
|
2 files changed, 70 insertions(+)
|
|
|
|
--- a/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
|
|
+++ b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
|
|
@@ -88,6 +88,10 @@ properties:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [0, 1, 2, 3, 4, 5, 6]
|
|
|
|
+ starfive,keep-gpiomux:
|
|
+ description: Keep pinmux for these GPIOs from being reset at boot.
|
|
+ $ref: /schemas/types.yaml#/definitions/uint32-array
|
|
+
|
|
required:
|
|
- compatible
|
|
- reg
|
|
--- a/drivers/pinctrl/starfive/pinctrl-starfive-jh7100.c
|
|
+++ b/drivers/pinctrl/starfive/pinctrl-starfive-jh7100.c
|
|
@@ -200,6 +200,10 @@ static u16 starfive_drive_strength_from_
|
|
return (clamp(i, 14U, 63U) - 14) / 7;
|
|
}
|
|
|
|
+static bool keepmux;
|
|
+module_param(keepmux, bool, 0644);
|
|
+MODULE_PARM_DESC(keepmux, "Keep pinmux settings from previous boot stage");
|
|
+
|
|
struct starfive_pinctrl {
|
|
struct gpio_chip gc;
|
|
struct pinctrl_gpio_range gpios;
|
|
@@ -1222,6 +1226,65 @@ static void starfive_disable_clock(void
|
|
clk_disable_unprepare(data);
|
|
}
|
|
|
|
+#define GPI_END (GPI_USB_OVER_CURRENT + 1)
|
|
+static void starfive_pinmux_reset(struct starfive_pinctrl *sfp)
|
|
+{
|
|
+ static const DECLARE_BITMAP(defaults, GPI_END) = {
|
|
+ BIT_MASK(GPI_I2C0_PAD_SCK_IN) |
|
|
+ BIT_MASK(GPI_I2C0_PAD_SDA_IN) |
|
|
+ BIT_MASK(GPI_I2C1_PAD_SCK_IN) |
|
|
+ BIT_MASK(GPI_I2C1_PAD_SDA_IN) |
|
|
+ BIT_MASK(GPI_I2C2_PAD_SCK_IN) |
|
|
+ BIT_MASK(GPI_I2C2_PAD_SDA_IN) |
|
|
+ BIT_MASK(GPI_I2C3_PAD_SCK_IN) |
|
|
+ BIT_MASK(GPI_I2C3_PAD_SDA_IN) |
|
|
+ BIT_MASK(GPI_SDIO0_PAD_CARD_DETECT_N) |
|
|
+
|
|
+ BIT_MASK(GPI_SDIO1_PAD_CARD_DETECT_N) |
|
|
+ BIT_MASK(GPI_SPI0_PAD_SS_IN_N) |
|
|
+ BIT_MASK(GPI_SPI1_PAD_SS_IN_N) |
|
|
+ BIT_MASK(GPI_SPI2_PAD_SS_IN_N) |
|
|
+ BIT_MASK(GPI_SPI2AHB_PAD_SS_N) |
|
|
+ BIT_MASK(GPI_SPI3_PAD_SS_IN_N),
|
|
+
|
|
+ BIT_MASK(GPI_UART0_PAD_SIN) |
|
|
+ BIT_MASK(GPI_UART1_PAD_SIN) |
|
|
+ BIT_MASK(GPI_UART2_PAD_SIN) |
|
|
+ BIT_MASK(GPI_UART3_PAD_SIN) |
|
|
+ BIT_MASK(GPI_USB_OVER_CURRENT)
|
|
+ };
|
|
+ DECLARE_BITMAP(keep, NR_GPIOS) = {};
|
|
+ struct device_node *np = sfp->gc.parent->of_node;
|
|
+ int len = of_property_count_u32_elems(np, "starfive,keep-gpiomux");
|
|
+ int i;
|
|
+
|
|
+ for (i = 0; i < len; i++) {
|
|
+ u32 gpio;
|
|
+
|
|
+ of_property_read_u32_index(np, "starfive,keep-gpiomux", i, &gpio);
|
|
+ if (gpio < NR_GPIOS)
|
|
+ set_bit(gpio, keep);
|
|
+ }
|
|
+
|
|
+ for (i = 0; i < NR_GPIOS; i++) {
|
|
+ if (test_bit(i, keep))
|
|
+ continue;
|
|
+
|
|
+ writel_relaxed(GPO_DISABLE, sfp->base + GPON_DOEN_CFG + 8 * i);
|
|
+ writel_relaxed(GPO_LOW, sfp->base + GPON_DOUT_CFG + 8 * i);
|
|
+ }
|
|
+
|
|
+ for (i = 0; i < GPI_END; i++) {
|
|
+ void __iomem *reg = sfp->base + GPI_CFG_OFFSET + 4 * i;
|
|
+ u32 din = readl_relaxed(reg);
|
|
+
|
|
+ if (din >= 2 && din < (NR_GPIOS + 2) && test_bit(din - 2, keep))
|
|
+ continue;
|
|
+
|
|
+ writel_relaxed(test_bit(i, defaults), reg);
|
|
+ }
|
|
+}
|
|
+
|
|
static int starfive_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
@@ -1283,6 +1346,9 @@ static int starfive_probe(struct platfor
|
|
writel(value, sfp->padctl + IO_PADSHARE_SEL);
|
|
}
|
|
|
|
+ if (!keepmux)
|
|
+ starfive_pinmux_reset(sfp);
|
|
+
|
|
value = readl(sfp->padctl + IO_PADSHARE_SEL);
|
|
switch (value) {
|
|
case 0:
|