mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-19 21:58:04 +00:00
4070e2a64c
This target adds support for the StarFive JH7100 and JH7110 SoCs, based on 6.1, as well as a couple boards equipped with these. Specifications: SoCs: JH7100: - StarFive JH7100 dual-core RISC-V (U74, RC64GC) - additional monitoring (S7) and control (E24) cores - 2Mb L2 cache JH7110: - StarFive JH7110 quad-core RISC-V (U74, RV64GC) - additional monitoring (S7) and control (E24) cores - 2Mb L2 cache Boards: VisionFive1: - JH7100 @ 1GHz - Memory: 8Gb LPDDR4 - 4x USB3.0 - 1x GBit ethernet - AMPak 6236 wifi / bluetooth - audio - powered via USB-C VisionFive2: - JH7110 @ 1.5GHz - Memory: 2/4/8Gb DDR4 - 2x Gbit ethernet - 2x USB3.0 / 2x USB2.0 - eMMC / SDIO - various multimedia input/outputs (MIPI CSI, HDMI, audio) - M.2 key M slot - PoE support - powered via USB-C Installation: Standard SD-card installation via dd-ing the generated image to an SD-card of at least 256Mb. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
37 lines
1.2 KiB
Diff
37 lines
1.2 KiB
Diff
From 16214121afaadb8ae9aaf73351e874405eb47c15 Mon Sep 17 00:00:00 2001
|
|
From: Samin Guo <samin.guo@starfivetech.com>
|
|
Date: Tue, 25 Apr 2023 18:51:15 +0800
|
|
Subject: [PATCH 061/122] dt-bindings: net: motorcomm: Add pad driver strength
|
|
cfg
|
|
|
|
The motorcomm phy (YT8531) supports the ability to adjust the drive
|
|
strength of the rx_clk/rx_data, the value range of pad driver
|
|
strength is 0 to 7.
|
|
|
|
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
|
|
---
|
|
.../devicetree/bindings/net/motorcomm,yt8xxx.yaml | 12 ++++++++++++
|
|
1 file changed, 12 insertions(+)
|
|
|
|
--- a/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml
|
|
+++ b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml
|
|
@@ -62,6 +62,18 @@ properties:
|
|
for a timer.
|
|
type: boolean
|
|
|
|
+ motorcomm,rx-clk-driver-strength:
|
|
+ description: drive strength of rx_clk pad.
|
|
+ $ref: /schemas/types.yaml#/definitions/uint32
|
|
+ enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ]
|
|
+ default: 3
|
|
+
|
|
+ motorcomm,rx-data-driver-strength:
|
|
+ description: drive strength of rx_data/rx_ctl rgmii pad.
|
|
+ $ref: /schemas/types.yaml#/definitions/uint32
|
|
+ enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ]
|
|
+ default: 3
|
|
+
|
|
motorcomm,tx-clk-adj-enabled:
|
|
description: |
|
|
This configuration is mainly to adapt to VF2 with JH7110 SoC.
|